INDUSTRIAL Line Drivers & Receivers 1,832

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MC100LVEP16MNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.8 V	1			.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					2.375 V	.5 mm	85 Cel			-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	S-XDSO-N8	1	1 mm		2 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES		30	260	2 mm		0 ns
MC100LVEP16MNR4	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.8 V	1			.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					2.375 V	.5 mm	85 Cel			-40 Cel	1	TIN	DUAL	S-XDSO-N8	1	1 mm		2 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e3			2 mm		0 ns
MC10LVEP16DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1			.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.375 V	.65 mm	85 Cel			-40 Cel	1	TIN	DUAL	S-PDSO-G8	3	1.1 mm		3 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		0 ns
SN65LVDS180DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	2.7 ns	EIA-644; TIA-644	21 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	.02 Amp	TRUE	1		YES	e4	30	260	8.65 mm	.247 V	4.5 ns
SN65LVDS180DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	2.7 ns	EIA-644; TIA-644	12 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	.02 Amp	TRUE	1		YES	e4	30	260	8.65 mm	.247 V	4.5 ns
SN65LVDS33DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	9.9 mm		6 ns
SN65LVDS34DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS		EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		4.4 mm	Not Qualified	4 Amp	TRUE	2		NO	e4	30	260	4.9 mm		6 ns
AM26C32IDRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		27 ns
SN65C1168NSRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BICMOS	12 ns	EIA-422-B; TIA-422-B; V.11	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	6 Amp	COMPLEMENTARY	2	RECEIVER 3-STATE OUTPUTS	YES	e4	30	260	10.2 mm	2 V	27 ns
SN65HVD3088EDGKRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	20 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	.65 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified	8 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	3 mm	1.5 V	100 ns
SN65LVDM179DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	2.7 ns	GENERAL PURPOSE	15 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	.25 V	4.5 ns
SN65LVDM22DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			6 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified			2		YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		6 ns
SN65LVDS047DG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS	2.8 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e4	30	260	9.9 mm	.25 V	0 ns
SN65LVDS048ADRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	2 Amp		4		NO	e4	NOT SPECIFIED	260	9.9 mm		3.7 ns
SN65LVDS100DGKRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	.8 ns	EIA-644-A; TIA-644-A	61 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	3 mm		.8 ns
SN65LVDS100DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	.8 ns	EIA-644-A; TIA-644-A	.033 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		TRUE	1		YES	e4	NOT SPECIFIED	260	4.9 mm		.8 ns
SN65LVDS101DGKRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	.9 ns	EIA-644-A; TIA-644-A	61 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	3 mm		.9 ns
SN65LVDS348DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified	4 Amp		4		NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		6 ns
SN65LVDS3487DRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e4	NOT SPECIFIED	260	9.9 mm	.247 V	0 ns
SN65LVDS391DRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS	2.9 ns	EIA-644; TIA-644	26 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.91 mm	Not Qualified		TRUE			YES	e4	30	260	9.9 mm	.247 V	0 ns
SN65LVDT100DGKG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	.8 ns	EIA-644-A; TIA-644-A	30 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	3 mm		.8 ns
SN65LVDT122PWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			.9 ns	GENERAL PURPOSE	100 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V		.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified		COMPLEMENTARY	2		YES	e4	30	260	5 mm		.9 ns
SN65LVDT14PWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	2.9 ns	EIA-644-A; TIA-644-A	25 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm		4.4 mm	Not Qualified	8 Amp	TRUE	4		YES	e4	30	260	6.5 mm	.247 V	3.8 ns
SN65LVDT41PWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	2.9 ns	EIA-644-A; TIA-644-A	35 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm		4.4 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	6.5 mm	.247 V	3.8 ns
SN65MLVD047PWG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS	2.4 ns	EIA-899; TIA-899		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	.48 V	0 ns
SN65MLVD204ADG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS	3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.899 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.48 V	6 ns
SN65MLVD204ADRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS	3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.899 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	.48 V	6 ns
THS6022IPWPRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16 V	2	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 V			4.5 V	.65 mm	85 Cel	15 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.25 A	4.4 mm	Not Qualified		TRUE		ALSO OPERATES AT 9V TO 32V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
THS6042IDRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
MC100EL17DWG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	4		ECL		GENERAL PURPOSE	33 mA	DIFFERENTIAL	5 V		-4.2/-5.5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm		7.5 mm	Not Qualified			4	ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	12.8 mm		.55 ns
MC100EP16DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.28 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.28 ns
MC10EP89DTG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.37 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.1 mm		3 mm	Not Qualified				CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm	1.4 V	0 ns
MC75172BDWG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR	25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Tin (Sn)	DUAL	R-PDSO-G20	3	2.65 mm		7.5 mm	Not Qualified					YES	e3	40	260	12.8 mm	1.5 V	0 ns
MC75172BDWR2G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR	25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Tin (Sn)	DUAL	R-PDSO-G20	3	2.65 mm		7.5 mm	Not Qualified					YES	e3	40	260	12.8 mm	1.5 V	0 ns
ADM207EARSZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS		EIA-232-E; TIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24		2 mm		5.3 mm	Not Qualified	1.6 Amp		3		NO	e3			8.2 mm	10 V	2000 ns
ADM207EARSZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS		EIA-232-E; TIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2 mm		5.3 mm	Not Qualified	1.6 Amp		3		NO	e3	30	260	8.2 mm	10 V	2000 ns
ADM213EARUZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm		4.4 mm	Not Qualified	1.6 Amp		5		NO	e3		260	9.7 mm	10 V	2000 ns
MC10EL89DG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1		ECL	.44 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.2 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified				NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	YES	e3	30	260	4.9 mm		0 ns
SN65HVD09DGG	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			13.5 ns	RS-485; RS-422	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.5 mm	85 Cel	5 V	3-STATE	-40 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm		6.1 mm	Not Qualified	8 Amp	TRUE	9		YES	e4	30	260	14 mm	1 V	14.5 ns
AD8324ACPZ	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.13 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm		4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
SN65HVD3082EPE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS	1300 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	8 Amp	TRUE	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	200 ns
SN65LVDS050DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BIPOLAR	2.7 ns	EIA-644; TIA-644	20 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	.02 Amp	COMPLEMENTARY	2		YES	e4	30	260	9.9 mm	.247 V	4.5 ns
SN65LVDS109DBTG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	4.5 ns	EIA-644; TIA-644	64 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G38	2	1.2 mm		4.4 mm	Not Qualified		TRUE	2		YES	e4	NOT SPECIFIED	260	9.7 mm		4.5 ns
SN65LVDS116DGGG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	4.7 ns	EIA-644; TIA-644	115 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	16	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G64	2	1.2 mm		6.1 mm	Not Qualified			1		YES	e4	NOT SPECIFIED	260	17 mm		4.7 ns
SN65LVDS179DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	2.7 ns	EIA-644; TIA-644	12 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.02 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	.247 V	4.5 ns
SN65LVDS179DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	2.7 ns	EIA-644; TIA-644	12 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.02 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.247 V	4.5 ns
SN65LVDT2DG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		TTL	3.1 ns	EIA-644-A; TIA-644-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	2.5/3.3		SMALL OUTLINE	SOP8,.25	2.4 V	Line Driver or Receivers		2.4 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.02 Amp	TRUE	1		NO	e4	NOT SPECIFIED	260	4.9 mm	2 V	3.6 ns
SN65LVDT388ADBTG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8		CMOS		EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G38	2	1.2 mm		4.4 mm	Not Qualified	8 Amp	TRUE	8		NO	e4	NOT SPECIFIED	260	9.7 mm		4 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.