LOW SKEW CLOCK DRIVER Clock Drivers & Buffers 425

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN65LVEL11DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3	+-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.35 ns		Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified		3 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e4	30	260	3 mm	65LVEL
SI5330A-A00200-GM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				3.3	1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		4 Amp	Clock Drivers	.5 mm	85 Cel	OPEN-DRAIN	.1 ns	-40 Cel		8	QUAD		710 MHz	S-XQCC-N24		3.63 V	.9 mm	4 mm	Not Qualified		2.97 V						4 mm	ECL
SI5330B-A00205-GM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5	1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		4 Amp	Clock Drivers	.5 mm	85 Cel	OPEN-DRAIN	.1 ns	-40 Cel		8	QUAD		710 MHz	S-XQCC-N24		2.75 V	.9 mm	4 mm	Not Qualified		2.25 V				NOT SPECIFIED	NOT SPECIFIED	4 mm	5330
SI5330C-A00207-GM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				3.3	1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		4 Amp	Clock Drivers	.5 mm	85 Cel	OPEN-DRAIN	.1 ns	-40 Cel		8	QUAD		250 MHz	S-XQCC-N24		3.63 V	.9 mm	4 mm	Not Qualified		2.97 V						4 mm	5330
CDCLVD1213RGTR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	2.5	2.5		CHIP CARRIER	LCC16,.12SQ,20	2.5 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3	QUAD		800 MHz	S-PQCC-N16	2	2.625 V	1 mm	3 mm	Not Qualified		2.375 V			e4	NOT SPECIFIED	260	3 mm	CDC
CDCLVD2106RHAR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2			TR	2.5	2.5		CHIP CARRIER	LCC40,.24SQ,20	2.5 ns		Clock Drivers	.5 mm	85 Cel		.075 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	QUAD		800 MHz	S-PQCC-N40	3	2.625 V	1 mm	6 mm	Not Qualified		2.375 V			e4	30	260	6 mm	CDC
PCK2001MDB,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.5 ns		Clock Drivers	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		150 MHz	R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified		3.135 V			e4		260	10.2 mm	PCK2000
PCK2001MDB,118	NXP Semiconductors	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.5 ns		Clock Drivers	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		150 MHz	R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified		3.135 V			e4		260	10.2 mm	PCK2000
PCK2001RDB,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP16,.25	3.5 ns	1 Amp	Clock Drivers	.65 mm	70 Cel		.25 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL		533 MHz	R-PDSO-G16	1	3.465 V	1.5 mm	4.4 mm	Not Qualified		3.135 V			e4		260	5.2 mm
PCK2001RDB,118	NXP Semiconductors	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		3.5 ns			.65 mm	70 Cel		.25 ns	0 Cel	NICKEL PALLADIUM GOLD	6	DUAL		533 MHz	R-PDSO-G16	1	3.465 V	1.5 mm	4.4 mm	Not Qualified		3.135 V			e4			5.2 mm
PCK2002PD,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		SMALL OUTLINE	SOP8,.25	3.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		533 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4			4.9 mm
PCK2002PDP,118	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3.4 ns	24 Amp	Clock Drivers	.65 mm	85 Cel		.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		533 MHz	R-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified		3 V			e4			3 mm
PCK351D,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		SMALL OUTLINE	SOP24,.4	4.1 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V			e4		260	15.4 mm
PCK351DB,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.1 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4		260	8.2 mm
PCK3807AD,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			2.5	3.3		SMALL OUTLINE	SOP20,.4	4.5 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL			R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		2.3 V			e4	30	260	12.8 mm	3807
PCK3807ADB,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	4.5 ns	24 Amp	Clock Drivers	.65 mm	85 Cel		.35 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified		2.3 V			e4		260	7.2 mm	3807
PCK3807ADS,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.25	4.5 ns	24 Amp	Clock Drivers	.635 mm	85 Cel		.35 ns	-40 Cel	TIN	10	DUAL			R-PDSO-G20	1	3.6 V	1.73 mm	3.9 mm	Not Qualified		2.3 V			e3		260	8.7 mm	3807
PCK3807APW,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.5 ns	24 Amp	Clock Drivers	.65 mm	85 Cel		.35 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL			R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	6.5 mm	3807
PCKEL14D,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5	-2.5/-3.3/2.5/3.3		SMALL OUTLINE	SOP20,.4	.94 ns		Clock Drivers	1.27 mm	85 Cel		.07 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20	1	3.8 V	2.65 mm	7.5 mm	Not Qualified		2.375 V		NECL MODE: VCC=0 WITH VEE= -2.375V TO -3.8V	e4			12.8 mm
PCKEL14PW,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5	-2.5/-3.3/2.5/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.94 ns		Clock Drivers	.65 mm	85 Cel		.07 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20	1	3.8 V	1.1 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VCC=0 WITH VEE= -2.375V TO -3.8V	e4		260	6.5 mm
PCKEP14PW,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			2.5	-2.5/-3.3/2.5/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.475 ns		Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20	1	3.8 V	1.2 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VEE = -2.375 V TO -3.8 V WITH VCC = 0 V	e4		260	6.5 mm
PCKEP14PW,118	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.475 ns			.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20	1	3.8 V	1.2 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VEE = -2.375 V TO -3.8 V WITH VCC = 0 V	e4			6.5 mm
PCK3807APW,118	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				2.5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 ns			.65 mm	85 Cel		.35 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.3 V			e4			6.5 mm	3807
PCK3807ADB,118	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				2.5			SMALL OUTLINE, SHRINK PITCH		4.5 ns			.65 mm	85 Cel		.35 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified		2.3 V			e4			7.2 mm	3807
PCK351DB,118	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			SMALL OUTLINE, SHRINK PITCH		4.1 ns			.65 mm	85 Cel	3-STATE	.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4			8.2 mm
PCK111BD,128	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			2.5			FLATPACK, LOW PROFILE		.53 ns			.8 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	10	QUAD			S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified		2.25 V		ECL MODE: VCC=0 WITH VEE = -2.25V TO -3.8V	e0			7 mm
852911AVILFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	1.7 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	MATTE TIN	9	QUAD		500 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified		3 V			e3	30	260	11.505 mm	852911
NB7LQ572MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3		CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	TIN	2	QUAD		6 MHz	S-PQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified		2.375 V		CAH ALSO USE 3.6 V SUPPLY	e3	30	260	5 mm	7L
NB4L7210MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	VQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5	2.5/3.3		CHIP CARRIER, VERY THIN PROFILE	LCC52,.31SQ,20	20 ns	1 Amp	Clock Drivers	.5 mm	85 Cel		.2 ns	-40 Cel	TIN	10	QUAD			S-XQCC-N52	2	3.6 V	1 mm	8 mm	Not Qualified		2.375 V			e3	30	260	8 mm	4L
NB4L7210MNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	VQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5	2.5/3.3		CHIP CARRIER, VERY THIN PROFILE	LCC52,.31SQ,20	20 ns	1 Amp	Clock Drivers	.5 mm	85 Cel		.2 ns	-40 Cel	TIN	10	QUAD			S-XQCC-N52	2	3.6 V	1 mm	8 mm	Not Qualified		2.375 V			e3	30	260	8 mm	4L
CDC208NSG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
CDC208NSRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
CDCLVD110ARHBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5	5 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 ns		Clock Drivers	.5 mm	85 Cel	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD		100 MHz	S-PQCC-N32	2	2.625 V	1 mm	5 mm	Not Qualified		2.375 V	160 mA		e4	NOT SPECIFIED	260	5 mm	110
CDCLVD110ARHBTG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5	5 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 ns		Clock Drivers	.5 mm	85 Cel	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD		100 MHz	S-PQCC-N32	2	2.625 V	1 mm	5 mm	Not Qualified		2.375 V	160 mA		e4	NOT SPECIFIED	260	5 mm	110
CDCLVD110ARHBT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5	5 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 ns		Clock Driver	.5 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD		1100 MHz	S-PQCC-N32	2	2.625 V	1 mm	5 mm	Not Qualified		2.375 V	160 mA		e4	30	260	5 mm	110
MC100EP14DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.45 ns		Clock Drivers	.65 mm	85 Cel		.045 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	100E
MC100EP14DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.45 ns		Clock Drivers	.65 mm	85 Cel		.045 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	100E
MC100EP210SFA	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL			2.5	2.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.65 ns		Clock Drivers	.8 mm	85 Cel		.025 ns	-40 Cel	Tin/Lead (Sn80Pb20)	5	QUAD			S-PQFP-G32		2.625 V	1.6 mm	7 mm	Not Qualified		2.375 V			e0	30	235	7 mm	100E
MC100LVEP34DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			2.5	+-2.375/+-3.8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	.8 ns		Clock Drivers	.65 mm	85 Cel		.035 ns	-40 Cel	NICKEL PALLADIUM GOLD	3	DUAL		2800 MHz	R-PDSO-G16		3.8 V	1.2 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4		260	5 mm	100LVE
MC100LVEP34DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			2.5	+-2.375/+-3.8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	.8 ns		Clock Drivers	.65 mm	85 Cel		.035 ns	-40 Cel	NICKEL PALLADIUM GOLD	3	DUAL		2800 MHz	R-PDSO-G16	1	3.8 V	1.2 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	5 mm	100LVE
MC100EL11DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.34 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL			S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified		4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e0		235	3 mm	100EL
MC10EP139DW	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			3.3	-3.0/-5.5/3.3/5.0		SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	TIN LEAD	4	DUAL			R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	12.8 mm	10E
MAX9312ECJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2				2.5	2.5/3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP32,.35SQ,32	.41 ns		Clock Drivers	.8 mm	85 Cel		.046 ns	-40 Cel	TIN LEAD	5	QUAD			S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified		2.25 V		CAN ALSO BE OPERATED FROM -2.25V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL	e0			7 mm
MAX9314ECJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			2.5	2.5/3.3		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.4 ns		Clock Drivers	.8 mm	85 Cel		.035 ns	-40 Cel	TIN LEAD	10	QUAD		1500 MHz	S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified		2.25 V		ITS ALSO OPERATES -2.25V TO -3.8V IN LVECL OPERATION	e0			7 mm	ECL
NBSG111BAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	49	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA49,7X7,40	.35 ns		Clock Drivers	1 mm	70 Cel		.02 ns	-40 Cel	TIN LEAD	10	BOTTOM			S-PBGA-B49	3	3.465 V	1.4 mm	8 mm	Not Qualified		2.375 V		NECL OPERATING RANGE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V	e0			8 mm	111
STLVD111BFR	STMicroelectronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5	2.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	2.5 ns		Clock Drivers	.8 mm	85 Cel			-40 Cel	Matte Tin (Sn)	10	QUAD			S-PQFP-G32	3	2.625 V	1.6 mm	7 mm	Not Qualified		2.375 V			e3	30	235	7 mm	111
NBSG11BAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.16 ns		Clock Drivers	1 mm	70 Cel		.015 ns	-40 Cel	TIN LEAD	2	BOTTOM		10709 MHz	S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	11
NBSG11BA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.16 ns		Clock Drivers	1 mm	70 Cel		.015 ns	-40 Cel	TIN LEAD	2	BOTTOM		10709 MHz	S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	11

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.