LOW SKEW CLOCK DRIVER Clock Drivers & Buffers 425

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
NBSG14BA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.15 ns		Clock Drivers	1 mm	70 Cel	SERIES-RESISTOR	.015 ns	-40 Cel	TIN LEAD	4	BOTTOM	10700 MHz	S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V	e0			4 mm	14
NB100EP223FAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	1.8,3.3		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	1.2 ns		Clock Drivers	.5 mm	85 Cel		.065 ns	0 Cel	TIN LEAD	22	QUAD		S-PQFP-G64	2	3.6 V	1.6 mm	10 mm	Not Qualified	3 V			e0		235	10 mm	100E
NB100EP223FA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	1.8,3.3		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	1.2 ns		Clock Drivers	.5 mm	85 Cel		.065 ns	0 Cel	TIN LEAD	22	QUAD		S-PQFP-G64	2	3.6 V	1.6 mm	10 mm	Not Qualified	3 V			e0		235	10 mm	100E
NB100LVEP221FAR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3		FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN LEAD	20	QUAD		S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
NB100LVEP222FAR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3		FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	1 ns		Clock Drivers	.65 mm	85 Cel		.06 ns	-40 Cel	TIN LEAD	4	QUAD		S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
NB100LVEP224FAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	.75 ns		Clock Drivers	.5 mm	85 Cel		.04 ns	0 Cel	TIN LEAD	24	QUAD		S-PQFP-G64		3.8 V	1.6 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC=0 WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
MAX9320BESA	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			5	3.3/5		SMALL OUTLINE	SOP8,.25	.265 ns		Clock Drivers	1.27 mm	85 Cel		.03 ns	-40 Cel	Tin/Lead (Sn85Pb15)	2	DUAL	3000 MHz	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	3 V		ECL/LVECL MODE: VCC = 0 V WITH VEE = -3 V TO -5.5 V	e0			4.9 mm
CDCLVP110VFR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	2.5	-2.5/-3.3/2.5/3.3		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.37 ns	5 Amp	Clock Drivers	.8 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	3500 MHz	S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V	380 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY	e4	30	260	7 mm	110
CDCLVP110VF	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TRAY	2.5	-2.5/-3.3/2.5/3.3		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.37 ns	5 Amp	Clock Drivers	.8 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	3500 MHz	S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V	380 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY	e4	30	260	7 mm	110
NBSG53ABAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.275 ns		Clock Drivers	1 mm	70 Cel			-40 Cel	TIN LEAD	1	BOTTOM		S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	53
NBSG53ABA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.275 ns		Clock Drivers	1 mm	70 Cel			-40 Cel	TIN LEAD	1	BOTTOM		S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	53
CDCVF111FNR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	9	QUAD	650 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e4	30	260	11.505 mm	111
MAX9317BECJ	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	BIPOLAR		3.3	3.3		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.6 ns		Clock Drivers	.8 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	5	QUAD	1000 MHz	S-PQFP-G32	1	3.6 V	1.6 mm	7 mm	Not Qualified	3 V			e0			7 mm
NBSG11MN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		2.5	-2.5/-3.3/2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.16 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	TIN LEAD	2	QUAD	10500 MHz	S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0		235	3 mm	11
NBSG14MNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		2.5	-2.5/-3.3/2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.16 ns		Clock Drivers	.5 mm	85 Cel	SERIES-RESISTOR	.015 ns	-40 Cel	TIN LEAD	4	QUAD	10500 MHz	S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V	e0		235	3 mm	14
MAX9174EUB	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	3.23 ns		Clock Drivers	.5 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G10	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e0			3 mm
ADCLK954BCPZ	Analog Devices	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	BIPOLAR		3.3	3.3		CHIP CARRIER	LCC40,.24SQ,20	.21 ns		Clock Drivers	.5 mm	85 Cel			-40 Cel	MATTE TIN	12	QUAD	4500 MHz	S-XQCC-N40	3	3.63 V	1 mm	6 mm	Not Qualified	2.97 V			e3		260	6 mm	954
557G-08LFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel	3-STATE		0 Cel	MATTE TIN	1	DUAL	200 MHz	R-PDSO-G16	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V		LVDS UPTO 100MHZ	e3	30	260	5 mm	557
557GI-08LFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel	3-STATE		-40 Cel	MATTE TIN	1	DUAL	200 MHz	R-PDSO-G16	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V		LVDS UPTO 100MHZ	e3	30	260	5 mm	557
8535AG-21LFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1			3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	1.6 ns		Clock Drivers	.65 mm	70 Cel		.02 ns	0 Cel	MATTE TIN	2	DUAL		R-PDSO-G14	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V			e3	40	260	5 mm	8535
87008AGILFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	5.6 ns		Clock Drivers	.65 mm	85 Cel	3-STATE	.15 ns	-40 Cel	MATTE TIN	8	DUAL	250 MHz	R-PDSO-G24	1	2.625 V	1.2 mm	4.4 mm	Not Qualified	2.375 V		CAN ALSO OPERATE WITH 3.3V SUPPLY	e3	30	260	7.8 mm	87008
CDCM1804RGER	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD	800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified	3 V		3 LVPECL DIFFERENTIAL CLOCK OUTPUTS AND SINGLE ENDED LVCMOS OUTPUT	e4	30	260	4 mm	1803
CDCM1804RTHT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel		4	QUAD	800 MHz	S-PQCC-N24		3.6 V	.9 mm	4 mm	Not Qualified	3 V		3 LVPECL DIFFERENTIAL CLOCK OUTPUTS AND SINGLE ENDED LVCMOS OUTPUT		NOT SPECIFIED	NOT SPECIFIED	4 mm	1803
CDC351IDBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL	100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	25 mA		e4	30	260	8.2 mm	351
CDC351IDB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL	100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	25 mA		e4	30	260	8.2 mm	351
MC100LVEP111FAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	+-2.375/+-3.8		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.5 ns		Clock Drivers	.8 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	10	QUAD		S-PQFP-G32	2	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V		NECL MODE OPERATING RANGE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	7 mm	100LVE
CDCVF111FNG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	QUAD	650 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	11.505 mm	111
CDCVF111FNRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	QUAD	650 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	11.505 mm	111
MC100EL11DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-4.5		SMALL OUTLINE	SOP8,.25	.34 ns		Clock Drivers	1.27 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	2	DUAL		R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
NBSG53AMNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	-2.5/-3.3/2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.285 ns		Clock Drivers	.5 mm	85 Cel			-40 Cel	TIN LEAD	1	QUAD		S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0		235	3 mm	53
NBSG53AMN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	-2.5/-3.3/2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.285 ns		Clock Drivers	.5 mm	85 Cel			-40 Cel	TIN LEAD	1	QUAD		S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0		235	3 mm	53
NB6L16DR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5			SMALL OUTLINE		.18 ns			1.27 mm	85 Cel		.06 ns	-40 Cel	TIN LEAD	1	DUAL		R-PDSO-G8		3.465 V	1.75 mm	3.9 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0		235	4.9 mm	6L
NB6L16DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.18 ns			.65 mm	85 Cel		.06 ns	-40 Cel	TIN LEAD	1	DUAL		S-PDSO-G8		3.465 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0		235	3 mm	6L
NB6L16DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.18 ns			.65 mm	85 Cel		.06 ns	-40 Cel	Tin/Lead (Sn90Pb10)	1	DUAL		S-PDSO-G8		3.465 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0	30	235	3 mm	6L
NB6L16D	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5			SMALL OUTLINE		.18 ns			1.27 mm	85 Cel		.06 ns	-40 Cel	TIN LEAD	1	DUAL		R-PDSO-G8	1	3.465 V	1.75 mm	3.9 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0		235	4.9 mm	6L
NB6L11DR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	+-2.5/+-3.3		SMALL OUTLINE	SOP8,.25	.2 ns		Clock Drivers	1.27 mm	85 Cel		.015 ns	-40 Cel	TIN LEAD	2	DUAL		R-PDSO-G8		3.465 V	1.75 mm	3.9 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0		235	4.9 mm	6L
NB6L11DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	+-2.5/+-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.2 ns		Clock Drivers	.65 mm	85 Cel		.015 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G8	1	3.465 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0		235	3 mm	6L
MC100LVEP210FAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		2.5	+-2.375/+-3.8		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.43 ns		Clock Drivers	.8 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	5	QUAD		S-PQFP-G32	2	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	7 mm	100LVE
MAX9175EUB-T	Maxim Integrated	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.23 ns			.5 mm	85 Cel		.045 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G10	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e0		245	3 mm
MC100E111FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.78 ns		Clock Drivers	1.27 mm	85 Cel	3-STATE	.075 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V	e3	30	260	11.505 mm	100E
MC10E111FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel	3-STATE	.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V	e3	30	260	11.505 mm	10E
MC100EL34DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-4.5		SMALL OUTLINE	SOP16,.25	1.2 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	3	DUAL	1100 MHz	R-PDSO-G16	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	9.9 mm	100EL
MC10EL34DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-5.2		SMALL OUTLINE	SOP16,.25	1.2 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	3	DUAL	1100 MHz	R-PDSO-G16	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	9.9 mm	10EL
NB6L11DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	+-2.5/+-3.3		SMALL OUTLINE	SOP8,.25	.2 ns		Clock Drivers	1.27 mm	85 Cel		.015 ns	-40 Cel	TIN	2	DUAL		R-PDSO-G8	1	3.465 V	1.75 mm	3.9 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3	30	260	4.9 mm	6L
NB6L11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	+-2.5/+-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.2 ns		Clock Drivers	.65 mm	85 Cel		.015 ns	-40 Cel	TIN	2	DUAL		S-PDSO-G8	3	3.465 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3	30	260	3 mm	6L
NB6L11DTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	+-2.5/+-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.2 ns		Clock Drivers	.65 mm	85 Cel		.015 ns	-40 Cel	MATTE TIN	2	DUAL		S-PDSO-G8	3	3.465 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3	30	260	3 mm	6L
NB6L16DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.18 ns			.65 mm	85 Cel		.06 ns	-40 Cel	MATTE TIN	1	DUAL		S-PDSO-G8	3	3.465 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3	30	260	3 mm	6L
NB6L16DTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.18 ns			.65 mm	85 Cel		.06 ns	-40 Cel	MATTE TIN	1	DUAL		S-PDSO-G8	3	3.465 V	1.1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3	30	260	3 mm	6L

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.