Onsemi Clock Drivers & Buffers 288

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
NBSG11MAG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		2.5	-2.5/-3.3/2.5/3.3	GRID ARRAY, THIN PROFILE	LGA16,4X4,40	.16 ns		Clock Drivers	1 mm	70 Cel			.015 ns	-40 Cel	MATTE TIN	2	BOTTOM	10709 MHz	S-PBGA-B16		3.465 V	1.03 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3			4 mm	11
NBSG53AMAG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				2.5	-2.5/-3.3/2.5/3.3	GRID ARRAY, THIN PROFILE	BGA16,4X4,40	.27 ns		Clock Drivers	1 mm	70 Cel				-40 Cel	Matte Tin (Sn)	1	BOTTOM		S-PBGA-B16		3.465 V	1.03 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3	40	260	4 mm	53
MC100EP809MNG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		3.3	1.8,3.3	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	1 ns		Clock Drivers	.5 mm	85 Cel			.05 ns	0 Cel	MATTE TIN	9	QUAD	500 MHz	S-PQCC-N32	1	3.6 V	1 mm	5 mm	Not Qualified	3 V			e3	30	260	5 mm	100E
MC100EP809MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		3.3	1.8,3.3	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	1 ns		Clock Drivers	.5 mm	85 Cel			.05 ns	0 Cel	TIN	9	QUAD	500 MHz	S-PQCC-N32	1	3.6 V	1 mm	5 mm	Not Qualified	3 V			e3	30	260	5 mm	100E
NB4L6254MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		BIPOLAR		2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.485 ns		Clock Drivers	.5 mm	85 Cel	3-STATE		.05 ns	-40 Cel	TIN	6	QUAD	3000 MHz	S-PQCC-N32	1	3.465 V	1 mm	5 mm	Not Qualified	2.375 V			e3	30	260	5 mm	4L
NB6HQ14MMNHTBG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5	1.8/2.5,2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.275 ns		Clock Drivers	.5 mm	85 Cel			.5 ns	-40 Cel	NICKEL GOLD PALLADIUM	2	QUAD		S-XQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	2.375 V				30	260	3 mm	6N
NB6HQ14MMNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5	1.8/2.5,2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.275 ns		Clock Drivers	.5 mm	85 Cel			.5 ns	-40 Cel	NICKEL GOLD PALLADIUM	2	QUAD		S-XQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	2.375 V						3 mm	6N
NB6L572MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel			.015 ns	-40 Cel	MATTE TIN	2	QUAD	5000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	6L
NB6L572MMNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel			.015 ns	-40 Cel	MATTE TIN	2	QUAD	5000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	6L
NB6LQ572MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel			.015 ns	-40 Cel	TIN	2	QUAD	5000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	6L
NB7L585RMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.225 ns		Clock Drivers	.5 mm	85 Cel			.02 ns	-40 Cel	TIN	6	QUAD	6000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	7L
NB7L585RMNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.225 ns		Clock Drivers	.5 mm	85 Cel			.02 ns	-40 Cel	TIN	6	QUAD	6000 MHz	S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V	e3	30	260	5 mm	7L
MC100EP11DR2GH	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		3.3	-3.0/-5.5	SMALL OUTLINE	SOP8,.25	.3 ns		Clock Drivers	1.27 mm	85 Cel			.12 ns	-40 Cel	MATTE TIN	2	DUAL		R-PDSO-G8		5.5 V	1.75 mm	3.9 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e3			4.9 mm	10EP
NB7VQ14MMNHTBG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				1.8	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.225 ns		Clock Drivers	.5 mm	85 Cel			.015 ns	-40 Cel	NICKEL GOLD PALLADIUM	8	QUAD	7000 MHz	S-XQCC-N16	1	1.89 V	1 mm	3 mm	Not Qualified	1.71 V		ALSO OPERATES AT 3.3 AND 2.5 V SUPPLY		30	260	3 mm	7VQ
NB7VQ14MMNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				1.8	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.225 ns		Clock Drivers	.5 mm	85 Cel			.015 ns	-40 Cel	NICKEL GOLD PALLADIUM	8	QUAD	7000 MHz	S-XQCC-N16	1	1.89 V	1 mm	3 mm	Not Qualified	1.71 V		ALSO OPERATES AT 3.3 AND 2.5 V SUPPLY				3 mm	7VQ
P2P2305NZG-08SR	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3		SMALL OUTLINE		6 ns			1.27 mm	70 Cel			.25 ns	0 Cel	TIN	5	DUAL		R-PDSO-G8	1	3.6 V	1.75 mm	3.91 mm	Not Qualified	3 V			e3	30	260	4.9 mm	2305
P3I623S00BG-08TR	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3		SMALL OUTLINE					.65 mm	85 Cel			.25 ns	-40 Cel	MATTE TIN	1	DUAL	50 MHz	R-PDSO-G8	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e3	30	260	5 mm	S
P3P623S00BG-08TR	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3		SMALL OUTLINE					.65 mm	85 Cel			.25 ns	-40 Cel	TIN	1	DUAL	50 MHz	R-PDSO-G8	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e3	30	260	5 mm	S
NB7L585MNTWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel			.02 ns	-40 Cel	MATTE TIN	12	QUAD		S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3 TO 3.6 V SUPPLY	e3	30	260	5 mm	NB7
NB7L1008MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1			TUBE	2.5	2.5/3.3	CHIP CARRIER	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel			.025 ns	-40 Cel	MATTE TIN	8	QUAD		S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V	315 mA	ALSO OPERATES AT 3.3V	e3	30	260	5 mm	7L
NB7L1008MMNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1			TR	2.5	2.5/3.3	CHIP CARRIER	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel			.025 ns	-40 Cel	MATTE TIN	8	QUAD		S-XQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V	315 mA	ALSO OPERATES AT 3.3V	e3	30	260	5 mm	7L
NB7LQ572MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	.25 ns		Clock Drivers	.5 mm	85 Cel			.1 ns	-40 Cel	TIN	2	QUAD	6 MHz	S-PQCC-N32	1	2.625 V	1 mm	5 mm	Not Qualified	2.375 V		CAH ALSO USE 3.6 V SUPPLY	e3	30	260	5 mm	7L
NB7V52MMNTXG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	10000000000 Hz	ECL	TR		1.8/2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.6 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE		-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD	10000 MHz	S-PQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	1.71 V				30	260	3 mm	ECL
NB2308AI2HDG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3	SMALL OUTLINE	SOP16,.25		8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE		.2 ns	-40 Cel	TIN	8	DUAL	15 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e3	30	260	9.9 mm	2308
NB2308AI2HDTG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		8 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE		.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL	15 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	5 mm	2308
NB4L7210MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	VQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5	2.5/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC52,.31SQ,20	20 ns	1 Amp	Clock Drivers	.5 mm	85 Cel			.2 ns	-40 Cel	TIN	10	QUAD		S-XQCC-N52	2	3.6 V	1 mm	8 mm	Not Qualified	2.375 V			e3	30	260	8 mm	4L
NB4L7210MNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	VQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5	2.5/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC52,.31SQ,20	20 ns	1 Amp	Clock Drivers	.5 mm	85 Cel			.2 ns	-40 Cel	TIN	10	QUAD		S-XQCC-N52	2	3.6 V	1 mm	8 mm	Not Qualified	2.375 V			e3	30	260	8 mm	4L
SC14046BDWG	Onsemi	PLL BASED CLOCK DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				5		SMALL OUTLINE					1.27 mm	125 Cel				-55 Cel	TIN	2	DUAL	1.4 MHz	R-PDSO-G16	3	18 V	2.65 mm	7.5 mm	Not Qualified	3 V			e3	30	260	10.3 mm	4000/14000/40000
SC14046BDWR2G	Onsemi	PLL BASED CLOCK DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				5		SMALL OUTLINE					1.27 mm	125 Cel				-55 Cel	TIN	2	DUAL	1.4 MHz	R-PDSO-G16	3	18 V	2.65 mm	7.5 mm	Not Qualified	3 V			e3	30	260	10.3 mm	4000/14000/40000
MC100EP14DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		3.3	-4.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.45 ns		Clock Drivers	.65 mm	85 Cel			.045 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL		R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	100E
MC100EP14DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		3.3	-4.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.45 ns		Clock Drivers	.65 mm	85 Cel			.045 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL		R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	100E
MC100EP210SFA	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL		2.5	2.5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.65 ns		Clock Drivers	.8 mm	85 Cel			.025 ns	-40 Cel	Tin/Lead (Sn80Pb20)	5	QUAD		S-PQFP-G32		2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V			e0	30	235	7 mm	100E
MC100LVEP34DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		2.5	+-2.375/+-3.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	.8 ns		Clock Drivers	.65 mm	85 Cel			.035 ns	-40 Cel	NICKEL PALLADIUM GOLD	3	DUAL	2800 MHz	R-PDSO-G16		3.8 V	1.2 mm	4.4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4		260	5 mm	100LVE
MC100LVEP34DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		2.5	+-2.375/+-3.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	.8 ns		Clock Drivers	.65 mm	85 Cel			.035 ns	-40 Cel	NICKEL PALLADIUM GOLD	3	DUAL	2800 MHz	R-PDSO-G16	1	3.8 V	1.2 mm	4.4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	5 mm	100LVE
MC100EL11DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		5	-4.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.34 ns		Clock Drivers	.65 mm	85 Cel			.02 ns	-40 Cel	TIN LEAD	2	DUAL		S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e0		235	3 mm	100EL
MC10EP139DW	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		3.3	-3.0/-5.5/3.3/5.0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel			.1 ns	-40 Cel	TIN LEAD	4	DUAL		R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	12.8 mm	10E
NBSG111BAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	49	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		2.5	-2.5/-3.3/2.5/3.3	GRID ARRAY, LOW PROFILE	BGA49,7X7,40	.35 ns		Clock Drivers	1 mm	70 Cel			.02 ns	-40 Cel	TIN LEAD	10	BOTTOM		S-PBGA-B49	3	3.465 V	1.4 mm	8 mm	Not Qualified	2.375 V		NECL OPERATING RANGE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V	e0			8 mm	111
NBSG11BAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		2.5	-2.5/-3.3/2.5/3.3	GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.16 ns		Clock Drivers	1 mm	70 Cel			.015 ns	-40 Cel	TIN LEAD	2	BOTTOM	10709 MHz	S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	11
NBSG11BA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		2.5	-2.5/-3.3/2.5/3.3	GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.16 ns		Clock Drivers	1 mm	70 Cel			.015 ns	-40 Cel	TIN LEAD	2	BOTTOM	10709 MHz	S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	11
NBSG14BA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		2.5	-2.5/-3.3/2.5/3.3	GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.15 ns		Clock Drivers	1 mm	70 Cel	SERIES-RESISTOR		.015 ns	-40 Cel	TIN LEAD	4	BOTTOM	10700 MHz	S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V	e0			4 mm	14
NB100EP223FAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		3.3	1.8,3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	1.2 ns		Clock Drivers	.5 mm	85 Cel			.065 ns	0 Cel	TIN LEAD	22	QUAD		S-PQFP-G64	2	3.6 V	1.6 mm	10 mm	Not Qualified	3 V			e0		235	10 mm	100E
NB100EP223FA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		3.3	1.8,3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	1.2 ns		Clock Drivers	.5 mm	85 Cel			.065 ns	0 Cel	TIN LEAD	22	QUAD		S-PQFP-G64	2	3.6 V	1.6 mm	10 mm	Not Qualified	3 V			e0		235	10 mm	100E
NB100LVEP221FAR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel			.05 ns	-40 Cel	TIN LEAD	20	QUAD		S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
NB100LVEP222FAR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	1 ns		Clock Drivers	.65 mm	85 Cel			.06 ns	-40 Cel	TIN LEAD	4	QUAD		S-PQFP-G52		3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
NB100LVEP224FAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	.75 ns		Clock Drivers	.5 mm	85 Cel			.04 ns	0 Cel	TIN LEAD	24	QUAD		S-PQFP-G64		3.8 V	1.6 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC=0 WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
NBSG53ABAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				2.5	-2.5/-3.3/2.5/3.3	GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.275 ns		Clock Drivers	1 mm	70 Cel				-40 Cel	TIN LEAD	1	BOTTOM		S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	53
NBSG53ABA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				2.5	-2.5/-3.3/2.5/3.3	GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.275 ns		Clock Drivers	1 mm	70 Cel				-40 Cel	TIN LEAD	1	BOTTOM		S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	53
NBSG11MN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL		2.5	-2.5/-3.3/2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.16 ns		Clock Drivers	.5 mm	85 Cel			.015 ns	-40 Cel	TIN LEAD	2	QUAD	10500 MHz	S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0		235	3 mm	11

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.