Onsemi Clock Drivers & Buffers 288

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC100H641FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H642FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	5.75 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H642FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	5.75 ns		Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H643FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H646FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H646FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100LVE210FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.9 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN	4	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	11.505 mm	100LVE
MC100LVE210FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.9 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN	4	QUAD		S-PQCC-J28		3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	11.505 mm	100LVE
MC100LVE310FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	8	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	11.505 mm	100LVE
MC100LVEL11DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.3	SMALL OUTLINE	SOP8,.25	.405 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.02 ns	-40 Cel	MATTE TIN	2	DUAL	1000 MHz	R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	3 V		NECL MODE: 0V VCC WITH VEE = -3V TO -3.8V	e3	30	260	4.9 mm	100LVEL
MC100LVEL34DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	+-3.3	SMALL OUTLINE	SOP16,.25	1 ns		Clock Drivers	1.27 mm	85 Cel			-40 Cel	TIN	3	DUAL	1500 MHz	R-PDSO-G16	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	3 V		NECL MODE: 0V VCC WITH VEE = -3V TO -3.8V	e3	30	260	9.9 mm	100LVEL
MC100LVEL37DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	+-3.3	SMALL OUTLINE	SOP20,.4	.94 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	4	DUAL		R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE= -3V TO -3.8V	e3	30	260	12.8 mm	100LVEL
MC10E211FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN	6	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10E411FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	0 Cel	TIN	9	QUAD		S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	4.5 V		NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V	e3		260	11.505 mm	10E
MC10EL34DR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	+-5	SMALL OUTLINE	SOP16,.25	1.2 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.05 ns	-40 Cel	TIN	3	DUAL	1100 MHz	R-PDSO-G16	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	9.9 mm	10EL
MC10EP11DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5/3.3	SMALL OUTLINE	SOP8,.25	.3 ns		Clock Drivers	1.27 mm	85 Cel		.12 ns	-40 Cel	MATTE TIN	2	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e3	30	260	4.9 mm	10EP
MC10EP11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.12 ns	-40 Cel	MATTE TIN	2	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e3	30	260	3 mm	10EP
MC10EP139DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5/3.3/5.0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	TIN	4	DUAL		R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	12.8 mm	10E
MC10EP139DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5/3.3/5.0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	TIN	4	DUAL		R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	12.8 mm	10E
MC10H640FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	6	QUAD	135 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H641FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H641FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H642FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	5.75 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H642FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	5.75 ns		Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H643FNG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5,-5.2	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H645FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	5.8 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.65 ns	0 Cel	TIN	9	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H646FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5	CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
NB100EP223FAG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	1.8,3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	1.2 ns		Clock Drivers	.5 mm	85 Cel		.065 ns	0 Cel	TIN	22	QUAD		S-PQFP-G64	3	3.6 V	1.6 mm	10 mm	Not Qualified	3 V			e3		260	10 mm	100E
NB100EP223FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	1.8,3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	1.2 ns		Clock Drivers	.5 mm	85 Cel		.065 ns	0 Cel	TIN	22	QUAD		S-PQFP-G64	3	3.6 V	1.6 mm	10 mm	Not Qualified	3 V			e3		260	10 mm	100E
NB100LVEP222FAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	1 ns		Clock Drivers	.65 mm	85 Cel		.06 ns	-40 Cel	TIN	4	QUAD		S-PQFP-G52	3	3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
NB100LVEP224FAG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	.75 ns		Clock Drivers	.5 mm	85 Cel		.04 ns	0 Cel	TIN	24	QUAD		S-PQFP-G64	3	3.8 V	1.6 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC=0 WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
NBSG14MNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		2.5	-2.5/-3.3/2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.16 ns		Clock Drivers	.5 mm	85 Cel	SERIES-RESISTOR	.015 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	QUAD	10500 MHz	S-XQCC-N16	1	3.465 V	1 mm	3 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V		30	260	3 mm	14
NBSG53AMNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	-2.5/-3.3/2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.285 ns		Clock Drivers	.5 mm	85 Cel			-40 Cel	NICKEL GOLD PALLADIUM	1	QUAD		S-XQCC-N16	1	3.465 V	1 mm	3 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V				3 mm	53
MC100EP14DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-4.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.45 ns		Clock Drivers	.65 mm	85 Cel		.045 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL		R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4	30	260	6.5 mm	100E
MC100LVE310FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	8	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	11.505 mm	100LVE
MC100E310FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	+-5	CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	8	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: 0V VCC WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100LVEP111MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	ECL		2.5	+-2.375/+-3.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.5 ns		Clock Drivers	.5 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	10	QUAD		S-XQCC-N32	1	3.8 V	1 mm	5 mm	Not Qualified	2.375 V		NECL MODE OPERATING RANGE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	5 mm	100LVE
MC100LVEP14DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-4.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.475 ns		Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL	2000 MHz	R-PDSO-G20	1	3.8 V	1.2 mm	4.4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	6.5 mm	100LVE
MC100LVEL11MNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.405 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL GOLD PALLADIUM	2	DUAL	1000 MHz	S-PDSO-N8	1	3.8 V	1 mm	2 mm	Not Qualified	3 V		NECL MODE: 0V VCC WITH VEE = -3V TO -3.8V		30	260	2 mm	100LVEL
NB100LVEP221FARG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN	20	QUAD		S-PQFP-G52	3	3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
NB3L8543SDTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	1.9 ns		Clock Drivers	.65 mm	85 Cel	3-STATE	.04 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		R-PDSO-G20	1	2.625 V	1.2 mm	4.4 mm	Not Qualified	2.375 V		ALSO OPERATES AT 2.97 TO 3.63	e4	30	260	6.5 mm	NB3
NB3L8543SDTR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	1.9 ns		Clock Drivers	.65 mm	85 Cel	3-STATE	.04 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		R-PDSO-G20	1	2.625 V	1.2 mm	4.4 mm	Not Qualified	2.375 V		ALSO OPERATES AT 2.97 TO 3.63	e4	30	260	6.5 mm	NB3
NB3N1900KMNTWG	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	72	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	70 Cel	3-STATE	.065 ns	-10 Cel	MATTE TIN	38	QUAD		S-XQCC-N72	3	3.465 V	1 mm	10 mm		3.135 V			e3	30	260	10 mm	NB3
NB3L208KMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 ns			.5 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	16	QUAD		S-XQCC-N32	1	2.625 V	1 mm	5 mm		2.375 V		ALSO OPERATES AT 2.97 TO 3.63	e3	30	260	5 mm	NB3
NB3W800LMNG	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.4 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	16	QUAD		S-XQCC-N48	3	3.465 V	1 mm	6 mm		3.135 V			e3	30	260	6 mm	NB3
NB3U1548CDG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3		SMALL OUTLINE		3.5 ns			1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel	MATTE TIN	4	DUAL	160 MHz	R-PDSO-G8	1	3.465 V	1.75 mm	3.9 mm		3.135 V			e3	30	260	4.9 mm	NB3
NB3F8L3010CMNTWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	2.5		CHIP CARRIER	LCC32,.2SQ,20				.5 mm	85 Cel	3-STATE	.055 ns	-40 Cel	MATTE TIN	10	QUAD	10 MHz	S-PQCC-N32	1	2.625 V	1 mm	5 mm		2.375 V	50 mA		e3	30	260	5 mm	3F
NB3L204KMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 ns			.5 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	8	QUAD	350 MHz	S-XQCC-N24	1	2.625 V	.9 mm	4 mm		2.375 V		ALSO OPERATES AT 2.97 TO 3.63 V SUPPLY	e3	30	260	4 mm	NB3

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.