Texas Instruments Clock Drivers & Buffers 254

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CDC2510APWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel		10	DUAL	100 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	2510
CDCVF25081DG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TUBE	3.3	3.3	25 pF	0	SMALL OUTLINE	SOP16,.25	6 ns	12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	8	DUAL	200 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	9.9 mm	25081
CDCV855IPWG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	2.5	2.5	14 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.05 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V			e4	NOT SPECIFIED	260	9.7 mm	855
CDCV855PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	2.5	2.5	14 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V			e4	NOT SPECIFIED	260	9.7 mm	855
CDC509PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		20 Amp	Clock Drivers	.65 mm	70 Cel		.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	509
SN0305042RTHR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.6 ns	12 Amp		.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD	800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified	3 V		3 LVPECL DIFFERENTIAL CLOCK OUTPUTS AND SINGLE ENDED LVCMOS OUTPUT	e4	30	260	4 mm	1803
SN65LVELT23DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2		TR	3.3		20 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.5 ns	24 Amp		.65 mm	85 Cel		.18 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL	180 MHz	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e4	30	260	3 mm	65LVEL
CDCLVD110AVFR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	2.5	2.5	5 pF	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	3 ns		Clock Driver	.8 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	1100 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V	160 mA		e4	30	260	7 mm	110
CDCLVD110AVF	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TRAY	2.5	2.5	5 pF	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	3 ns		Clock Driver	.8 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	1100 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V	160 mA		e4	30	260	7 mm	110
CDC351IDBG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL	100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	3 V	25 mA		e4	NOT SPECIFIED	260	15.4 mm	351
CDC351IDWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL	100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	3 V	25 mA		e4	NOT SPECIFIED	260	15.4 mm	351
CDC351IDWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		10	DUAL	100 MHz	R-PDSO-G24		3.6 V	2.65 mm	7.5 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	15.4 mm	351
CDCLVD110AVFRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	2.5	2.5	5 pF	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	3 ns		Clock Drivers	.8 mm	85 Cel	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD	100 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V	160 mA		e4	NOT SPECIFIED	260	7 mm	110
CDCL1810RGZRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8	1.8		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		8 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.064 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD	650 MHz	S-PQCC-N48	3	1.9 V	1 mm	7 mm	Not Qualified	1.7 V			e4	NOT SPECIFIED	260	7 mm	1810
CDCL1810RGZR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8	1.8		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		8 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.064 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD	650 MHz	S-PQCC-N48	3	1.9 V	1 mm	7 mm	Not Qualified	1.7 V			e4	NOT SPECIFIED	260	7 mm	1810
CDCL1810RGZTG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8	1.8		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		8 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.064 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD	650 MHz	S-PQCC-N48	3	1.9 V	1 mm	7 mm	Not Qualified	1.7 V			e4	NOT SPECIFIED	260	7 mm	1810
CDCL6010RGZRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8	1.8		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		8 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.064 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD	1250 MHz	S-PQCC-N48	3	1.9 V	1 mm	7 mm	Not Qualified	1.7 V			e4	NOT SPECIFIED	260	7 mm	6010
CDCL6010RGZT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8	1.8		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		8 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.064 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD	1250 MHz	S-PQCC-N48	3	1.9 V	1 mm	7 mm	Not Qualified	1.7 V			e4	NOT SPECIFIED	260	7 mm	6010
CDC328ADG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL	100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
CDCVF2509PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	25 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.1 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	DUAL	175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	7.8 mm	2509
CDCVF855PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	2.5	2.5	14 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.04 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	220 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V	10 mA		e4	30	260	9.7 mm	855
CDCVF855PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	2.5	2.5	14 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.04 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	220 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V	10 mA		e4	NOT SPECIFIED	260	9.7 mm	855
CDC857-3DGGG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	2.5,3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	0 Cel		10	DUAL		R-PDSO-G48		2.7 V	1.2 mm	6.1 mm	Not Qualified	2.3 V		ALSO REQUIRES 3.3V PLL VOLTAGE		NOT SPECIFIED	NOT SPECIFIED	12.5 mm
CDC857-2DGGRG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	2.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		R-PDSO-G48	2	2.7 V	1.2 mm	6.1 mm	Not Qualified	2.3 V			e4	30	260	12.5 mm
CDCLVP1204RGTR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HQCCN	SQUARE	UNSPECIFIED	YES	MUX	1		TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG	LCC16,.12SQ,20	.43 ns		Clock Driver	.5 mm	85 Cel	OPEN-EMITTER	.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD	2000 MHz	S-XQCC-N16	2	3.6 V	1 mm	3 mm	Not Qualified	2.375 V	45 mA		e4	30	260	3 mm	CDC
CDCLVP1204RGTT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HQCCN	SQUARE	UNSPECIFIED	YES	MUX	1		TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG	LCC16,.12SQ,20	.43 ns		Clock Driver	.5 mm	85 Cel	OPEN-EMITTER	.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD	2000 MHz	S-XQCC-N16	2	3.6 V	1 mm	3 mm	Not Qualified	2.375 V	45 mA		e4	30	260	3 mm	CDC
CDCLVP1102RGTT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.43 ns		Clock Drivers	.5 mm	85 Cel	OPEN-EMITTER	.01 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	QUAD	2000 MHz	S-PQCC-N16	2	2.625 V	1 mm	3 mm	Not Qualified	2.375 V	33 mA	DUMMY VAL	e4	30	260	3 mm	CDC
CDCLVP1216RGZR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	.55 ns		Clock Driver	.5 mm	85 Cel	OPEN-EMITTER	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD SILVER	16	QUAD	2000 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified	2.375 V	110 mA	DUMMY VAL	e4	30	260	7 mm	CDC
CDCLVP1216RGZT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	.55 ns		Clock Drivers	.5 mm	85 Cel	OPEN-EMITTER	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD SILVER	16	QUAD	2000 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified	2.375 V	110 mA	DUMMY VAL	e4	30	260	7 mm	CDC
CDCLVP2102RGTR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.4 ns		Clock Drivers	.5 mm	85 Cel	OPEN-EMITTER	.01 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD	2000 MHz	S-PQCC-N16	2	3.6 V	1 mm	3 mm	Not Qualified	2.375 V	48 mA	DUMMY VAL	e4	30	260	3 mm	CDC
CDCLVP2102RGTT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.4 ns		Clock Drivers	.5 mm	85 Cel	OPEN-EMITTER	.01 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD	2000 MHz	S-PQCC-N16	2	3.6 V	1 mm	3 mm	Not Qualified	2.375 V	48 mA	DUMMY VAL	e4	30	260	3 mm	CDC
CDCLVP2108RGZR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	.55 ns		Clock Drivers	.5 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	NICKEL PALLADIUM GOLD SILVER	16	QUAD	2000 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified	2.375 V	115 mA	DUMMY VAL	e4	30	260	7 mm	CDC
SN65EPT21DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL	TR	3.3		20 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.9 ns	24 Amp		.65 mm	85 Cel		.25 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	300 MHz	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e4	30	260	3 mm	65EP
SN65EPT21D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL	TUBE	3.3		20 pF	0	SMALL OUTLINE		1.9 ns	24 Amp		1.27 mm	85 Cel		.25 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	300 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e4	30	260	4.9 mm	65EP
CDC2351QDBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	AUTOMOTIVE	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	11 ns	12 Amp	Clock Drivers	.65 mm	125 Cel	3-STATE WITH SERIES RESISTOR	2.5 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL	100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
CDCVF2505PW	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TUBE	3.3	3.3	25 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	.15 ns	12 Amp	Clock Driver	.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	200 MHz	R-PDSO-G8	1	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e4	30	260	4.4 mm	2505
CDC5801ADBQR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TR	3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	62.5 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e4	30	260	8.65 mm	CDC
CDCLVP111VFR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	2.5	+-2.5/+-3.3		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.35 ns	5 Amp	Clock Drivers	.8 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	3500 MHz	S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V	85 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY	e4	30	260	7 mm	111
CDCLVP111VF	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TRAY	2.5	+-2.5/+-3.3		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.35 ns	5 Amp	Clock Drivers	.8 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	3500 MHz	S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V	85 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY	e4	30	260	7 mm	111
CDCE72010RGCRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.4 ns			.5 mm	85 Cel	3-STATE	2.8 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD	1500 MHz	S-PQCC-N64	3	3.6 V	1 mm	9 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	9 mm	72010
CDCE72010RGCTG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.4 ns			.5 mm	85 Cel	3-STATE	2.8 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	1500 MHz	S-PQCC-N64	3	3.6 V	1 mm	9 mm	Not Qualified	3 V			e4	30	260	9 mm	72010
CDCE72010RGCT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.4 ns		Clock Driver	.5 mm	85 Cel	3-STATE	2.8 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	1500 MHz	S-PQCC-N64	3	3.6 V	1 mm	9 mm	Not Qualified	3 V			e4	30	260	9 mm	72010
CDCLVP215RHBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	2		TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.3 ns	5 Amp	Clock Drivers	.5 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	3500 MHz	S-XQCC-N32	2	3.8 V	1 mm	5 mm	Not Qualified	2.375 V	90 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	5 mm	215
CDCLVP215RHBT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	2		TR	2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.3 ns	5 Amp	Clock Drivers	.5 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	3500 MHz	S-XQCC-N32	2	3.8 V	1 mm	5 mm	Not Qualified	2.375 V	90 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	5 mm	215
SN65EL11DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	5	+-5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified	4.2 V	26 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e4	30	260	3 mm	65EL
SN65EL11D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	5	+-5		0	SMALL OUTLINE	SOP8,.25	.3 ns		Clock Drivers	1.27 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	4.2 V	26 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e4	30	260	4.9 mm	65EL
SN65LVEL11DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	3.3	+-3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.35 ns		Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified	3 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e4	30	260	3 mm	65LVEL
CDCM61004RHBT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	MUX	1		TR	3.3		5 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel		.06 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD	683.264 MHz	S-PQCC-N32	2	3.6 V	1 mm	5 mm	Not Qualified	3 V			e4	30	260	5 mm	61004

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.