Texas Instruments Clock Drivers & Buffers 254

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CDCLVD1213RGTR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	2.5	2.5		CHIP CARRIER	LCC16,.12SQ,20	2.5 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3	QUAD		800 MHz	S-PQCC-N16	2	2.625 V	1 mm	3 mm	Not Qualified		2.375 V			e4	NOT SPECIFIED	260	3 mm	CDC
CDCLVD2106RHAR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2			TR	2.5	2.5		CHIP CARRIER	LCC40,.24SQ,20	2.5 ns		Clock Drivers	.5 mm	85 Cel		.075 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	QUAD		800 MHz	S-PQCC-N40	3	2.625 V	1 mm	6 mm	Not Qualified		2.375 V			e4	30	260	6 mm	CDC
CDCM7005HFG/EM	Texas Instruments	PLL BASED CLOCK DRIVER	MILITARY	FLAT	52	HGQFF	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	SCHMITT TRIGGER MUX	1				3.3		10 pF	FLATPACK, HEAT SINK/SLUG, GUARD RING					.64 mm	125 Cel	3-STATE	3.2 ns	-55 Cel		10	QUAD		1500 MHz	S-CQFP-F52		3.6 V	3.42 mm	13.97 mm			3 V				NOT SPECIFIED	NOT SPECIFIED	13.97 mm	CDCM
SN74SSQEB32882ZALR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	BALL	176	TFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1			TR	1.35	1.25/1.5		GRID ARRAY	BGA176,11X20,25			Other Logic ICs	.65 mm	85 Cel			0 Cel	TIN SILVER COPPER	0	BOTTOM		945 MHz	S-PBGA-B176	3		1.2 mm	8 mm	Not Qualified					e1	30	260	13.5 mm	S
CDC208NSG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
CDC208NSRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
CDCLVD110ARHBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5	5 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 ns		Clock Drivers	.5 mm	85 Cel	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD		100 MHz	S-PQCC-N32	2	2.625 V	1 mm	5 mm	Not Qualified		2.375 V	160 mA		e4	NOT SPECIFIED	260	5 mm	110
CDCLVD110ARHBTG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5	5 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 ns		Clock Drivers	.5 mm	85 Cel	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD		100 MHz	S-PQCC-N32	2	2.625 V	1 mm	5 mm	Not Qualified		2.375 V	160 mA		e4	NOT SPECIFIED	260	5 mm	110
CDCLVD110ARHBT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5	5 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 ns		Clock Driver	.5 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD		1100 MHz	S-PQCC-N32	2	2.625 V	1 mm	5 mm	Not Qualified		2.375 V	160 mA		e4	30	260	5 mm	110
CDCV855PWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	2.5	2.5	14 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	NICKEL PALLADIUM GOLD	4	DUAL		180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	9.7 mm	855
CDCVF25081D	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	25 pF	SMALL OUTLINE	SOP16,.25	6 ns	12 Amp	Clock Driver	1.27 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		200 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	9.9 mm	25081
CDCLVP110VFR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	-2.5/-3.3/2.5/3.3		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.37 ns	5 Amp	Clock Drivers	.8 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD		3500 MHz	S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified		2.375 V	380 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY	e4	30	260	7 mm	110
CDCLVP110VF	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TRAY	2.5	-2.5/-3.3/2.5/3.3		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.37 ns	5 Amp	Clock Drivers	.8 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD		3500 MHz	S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified		2.375 V	380 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY	e4	30	260	7 mm	110
CDCVF111FNR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	9	QUAD		650 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified		3 V			e4	30	260	11.505 mm	111
CDC2509CPW	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V	.01 mA		e4	30	260	7.8 mm	2509
CDCV850IDGGR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS			2.5	2.5,2.5/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	4 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.075 ns	-40 Cel		10	DUAL		140 MHz	R-PDSO-G48		2.7 V	1.2 mm	6.1 mm	Not Qualified		2.3 V				NOT SPECIFIED	NOT SPECIFIED	12.5 mm	850
CDCVF857DGG	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TUBE	2.5	2.5	14 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3.5 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.04 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL		220 MHz	R-PDSO-G48	2	2.7 V	1.2 mm	6.1 mm	Not Qualified		2.3 V	10 mA		e4	30	260	12.5 mm	857
CDCM1804RGER	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V		3 LVPECL DIFFERENTIAL CLOCK OUTPUTS AND SINGLE ENDED LVCMOS OUTPUT	e4	30	260	4 mm	1803
CDCM1804RTHT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel		4	QUAD		800 MHz	S-PQCC-N24		3.6 V	.9 mm	4 mm	Not Qualified		3 V		3 LVPECL DIFFERENTIAL CLOCK OUTPUTS AND SINGLE ENDED LVCMOS OUTPUT		NOT SPECIFIED	NOT SPECIFIED	4 mm	1803
CDC351IDBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	25 mA		e4	30	260	8.2 mm	351
CDC351IDB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	25 mA		e4	30	260	8.2 mm	351
CDC7005ZVAT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3			GRID ARRAY, LOW PROFILE, FINE PITCH		.95 ns	6 Amp		.8 mm	85 Cel	3-STATE	.06 ns	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	10	BOTTOM		800 MHz	S-PBGA-B64	3	3.6 V	1.4 mm	8 mm	Not Qualified		3 V	265 mA	INTEGRATED LOW-NOISE OP AMP	e1	NOT SPECIFIED	260	8 mm	7005
CDCVF111FNG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TUBE	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	QUAD		650 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified		3 V			e4	NOT SPECIFIED	260	11.505 mm	111
CDCVF111FNRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	QUAD		650 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified		3 V			e4	NOT SPECIFIED	260	11.505 mm	111
CDCVF2509APWR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	25 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2509
CDCVF2509APW	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	25 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2509
CDCVF2510APWR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	25 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Driver	.65 mm	85 Cel	SERIES-RESISTOR	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2510
CDCVF2510APW	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	25 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	2510
CDCLVP1212RHAR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5/3.3		CHIP CARRIER	LCC40,.24SQ,20	.55 ns		Clock Drivers	.5 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	NICKEL PALLADIUM GOLD SILVER	12	QUAD		2000 MHz	S-PQCC-N40	3	3.6 V	1 mm	6 mm	Not Qualified		2.375 V	88 mA		e4	30	260	6 mm	CDC
CDCLVP1212RHAT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5/3.3		CHIP CARRIER	LCC40,.24SQ,20	.55 ns		Clock Drivers	.5 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	NICKEL PALLADIUM GOLD SILVER	12	QUAD		2000 MHz	S-PQCC-N40	3	3.6 V	1 mm	6 mm	Not Qualified		2.375 V	88 mA		e4	30	260	6 mm	CDC
CDC111FNRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				3.3			CHIP CARRIER		.6 ns			1.27 mm	70 Cel		.05 ns	0 Cel	NICKEL PALLADIUM GOLD	9	QUAD			S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified		3 V			e4			11.505 mm	111
CDCLVP111RHBT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.35 ns	5 Amp	Clock Drivers	.5 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD		3500 MHz	S-PQCC-N32	2	3.8 V	1 mm	5 mm	Not Qualified		2.375 V	85 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY	e4	30	260	5 mm	111
CDCP1803MRGETEP	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	.6 ns		Clock Drivers	.5 mm	125 Cel	3-STATE	.1 ns	-55 Cel	NICKEL PALLADIUM GOLD	3	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V			e4	30	260	4 mm	1803
SN65EPT22DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2			TUBE	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.55 ns			.65 mm	85 Cel		.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified		3 V	50 mA		e4	30	260	3 mm	65EL
V62/09619-01XE	Texas Instruments	LOW SKEW CLOCK DRIVER	MILITARY	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	.6 ns		Clock Drivers	.5 mm	125 Cel	3-STATE	.1 ns	-55 Cel	NICKEL PALLADIUM GOLD	3	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V			e4	30	260	4 mm	1803
SN65LVDS104PWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3	3.3	10 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.2 ns		Clock Drivers	.65 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL			R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	5 mm	LVDS
SN65EPT22DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		TR	3.3			SMALL OUTLINE		.55 ns			1.27 mm	85 Cel		.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	50 mA		e4	30	260	4.9 mm	65EL
CDCU877ARTBR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS			1.8	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20		9 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.035 ns	-40 Cel		10	QUAD		340 MHz	S-PQCC-N40		1.9 V	.9 mm	6 mm	Not Qualified		1.7 V				NOT SPECIFIED	NOT SPECIFIED	6 mm	877
CDCU877GQLT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		TR	1.8	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel	TIN LEAD	10	BOTTOM		340 MHz	R-PBGA-B52	2	1.9 V	1 mm	4.5 mm	Not Qualified		1.7 V			e0	20	235	7 mm	877
CDCU877ZQLR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		TR	1.8	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel	TIN SILVER COPPER	10	BOTTOM		340 MHz	R-PBGA-B52	2	1.9 V	1 mm	4.5 mm	Not Qualified		1.7 V			e1	30	260	7 mm	877
CDCV855PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	2.5	2.5	14 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	NICKEL PALLADIUM GOLD	4	DUAL		180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	9.7 mm	855
CDCVF25081PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	25 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	6 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		200 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	5 mm	25081
CDCVF25081PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	25 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	6 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		200 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	5 mm	25081
CDC586PAHG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		FLATPACK, THIN PROFILE	TQFP52,.47SQ		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	12	QUAD		100 MHz	S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified		3 V			e4	30	260	10 mm	586
CDC516DGGRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		20 Amp	Clock Drivers	.5 mm	70 Cel		.2 ns	0 Cel	NICKEL PALLADIUM GOLD	16	DUAL		125 MHz	R-PDSO-G48	2	3.6 V	1.2 mm	6.1 mm	Not Qualified		3 V	.02 mA		e4	30	260	12.5 mm	516
CDCLVD110VFG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5	2.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	3 ns		Clock Driver	.8 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD		150 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified		2.375 V			e4	30	260	7 mm	110
CDCLVD110VFRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	3 ns		Clock Driver	.8 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD		150 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified		2.375 V	130 mA		e4	30	260	7 mm	110
CDCLVP110VFRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	-2.5/-3.3/2.5/3.3		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.37 ns	5 Amp	Clock Drivers	.8 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD		3500 MHz	S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified		2.375 V	380 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY	e4	30	260	7 mm	110

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.