INDUSTRIAL Latches & Flip-Flops 257

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LVTH273PW	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	150000000 Hz	BICMOS		8	TUBE	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	5.5 ns	64 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2.7 V	5 mA		e4	30	260	6.5 mm	LVT
SN74HC74DT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	220 ns	5.2 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	2 V	.04 mA		e4	30	260	8.65 mm	HC
SN74HCT273PWT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	42 ns	4 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	30	260	6.5 mm	HCT
SN74HC109DT	Texas Instruments	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	CMOS		2	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	220 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		DUMMY VAL	e4	30	260	9.9 mm	HC/UH
SN74HC112DT	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	20000000 Hz	CMOS		2	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	155 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	2 V	.04 mA		e4	30	260	9.9 mm	HC
SN74HC259DT	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		CMOS		8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	165 ns	5.2 Amp	FF/Latches	1.27 mm	85 Cel			LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.91 mm	Not Qualified	TRUE	2 V	.08 mA	1:8 DMUX FOLLOWED BY LATCH	e4	30	260	9.9 mm	HC
SN74LVTH273IPWREP	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	150000000 Hz	BICMOS		8	TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	5.5 ns	64 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2.7 V			e4	30	260	6.5 mm	LVT
SN74HC174DT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		6	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	200 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e4	30	260	9.9 mm	HC/UH
MAX9381ESA-T	Maxim Integrated	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		BIPOLAR		1		3.3			SMALL OUTLINE		405 ns			1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	3000 MHz	R-PDSO-G8		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2.25 V		ECL MODE OPERATING RANGE:VEE=-2.25 TO -5.5V	e0			4.9 mm	9381
MAX9381EUA-T	Maxim Integrated	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1		BIPOLAR		1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		405 ns			.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	3000 MHz	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	2.25 V		ECL MODE OPERATING RANGE:VEE=-2.25 TO -5.5V	e0			3 mm	9381
MC100EP451FAG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		6		3.3	-4.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.55 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD		S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	7 mm	100E
MC100LVEL29DWG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE	SOP20,.4	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	1100 MHz	R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	12.8 mm	100LVEL
MC10EP451FAG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		6		3.3	-5.2		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.55 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD		S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	7 mm	10E
MC74ACT273NG	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	125000000 Hz	CMOS		8	RAIL	5	5	50 pF	IN-LINE	DIP20,.3	12 ns	24 Amp	FF/Latches	2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	125 MHz	R-PDIP-T20		5.5 V	4.57 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e3		260	26.415 mm	ACT
MC74LVX74MG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	50000000 Hz	CMOS		1	RAIL	2.7	3.3	50 pF	SMALL OUTLINE	SOP14,.3	22 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14		3.6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	LV/LV-A/LVX/H
MC100EL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		ECL		1	TUBE	5	-4.5		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
SN74AUC1G79DCKRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V	.01 mA		e4	30	260	2 mm	AUC
SN74AUC1G80DCKRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	.8 V	.01 mA		e4	30	260	2 mm	AUC
MC10EP51DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.37 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	10E
MC10EP52DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	4000000000 Hz	ECL		1	TUBE	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP8,.25	.38 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	10E
MC74ACT273DWR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	125000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	12 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	125 MHz	R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e3	30	260	12.8 mm	ACT
SN74HCT74DRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	22000000 Hz	CMOS	MIL-PRF-38535	1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	35 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	8.65 mm	HCT
SN74HCT74NSRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	22000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.3	35 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	10.2 mm	HCT
MC100EL29DWR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		ECL		1	TR	5	-4.5		SMALL OUTLINE	SOP20,.4	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1100 MHz	R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
MC100EL31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	2000000000 Hz	ECL		1	RAIL	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	100EL
MC100EL35DG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	1400000000 Hz	ECL		2	RAIL	5	+-5		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
MC100EL51DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		ECL		1	TUBE	5	-4.5		SMALL OUTLINE	SOP8,.25	.565 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	36 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
MC100EL51DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	1800000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.565 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	36 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	100EL
MC100EL52DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2200000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE	SOP8,.25	.465 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
MC100EL52DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	2200000000 Hz	ECL		1	RAIL	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.465 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	100EL
MC100EP131FAG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		4	TRAY	3.3	-4.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.6 ns		FF/Latches	.8 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD		S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	130 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	7 mm	100E
MC100EP31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.41 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	4.9 mm	100E
MC100EP31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.41 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	3 mm	100E
MC100EP31DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.41 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	3 mm	100E
MC100EP35DR2G	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		2	TR	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.49 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	100E
MC100EP35DTG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		2	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.49 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
MC100EP51DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.45 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	100E
MC100EP52DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	4000000000 Hz	ECL		1	TUBE	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.38 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	100E
MC100LVEL30DWG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		ECL		3		3.3	-3.3		SMALL OUTLINE	SOP20,.4	.82 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1200 MHz	R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	12.8 mm	100LVEL
MC100LVEL30DWR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		ECL		3	TR	3.3	-3.3		SMALL OUTLINE	SOP20,.4	.82 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	1200 MHz	R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	12.8 mm	100LVEL
MC100LVEL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2900000000 Hz	ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2900 MHz	R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	38 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	4.9 mm	100LVEL
MC100LVEL31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	2900000000 Hz	ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2900 MHz	S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	38 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	3 mm	100LVEL
MC100LVEL51DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2900000000 Hz	ECL		1	TR	3.3	-3.3		SMALL OUTLINE	SOP8,.25	.52 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	2800 MHz	R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	4.9 mm	100LVEL
MC100LVEL51DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	2900000000 Hz	ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.52 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2800 MHz	S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	3 mm	100LVEL
MC10EL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		ECL		1	TUBE	5	-5.2		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
MC10EL31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	2000000000 Hz	ECL		1	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	10EL
MC10EL31DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	2000000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	10EL
MC10EL35DG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	1400000000 Hz	ECL		2	RAIL	5	-5.2		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.