INDUSTRIAL Latches & Flip-Flops 257

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
V62/08602-01XA	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	114	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		1		2.5	2.5		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA114,6X19,32	3.1 ns		Other Logic ICs	.8 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	BOTTOM	200 MHz	R-PBGA-B114	3	2.7 V	1.4 mm	5.5 mm	Not Qualified	TRUE	2.3 V			e0	20	220	15.5 mm	SSTV
MC10EP52MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	4000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.38 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	DUAL		S-XDSO-N8	1	5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V		30	260	2 mm	10E
NB4L52MNR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	1	2500000000 Hz	ECL		1	TR	2.5	2.5/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.5 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	QUAD		S-XQCC-N16	1	5.5 V	1 mm	3 mm	Not Qualified	COMPLEMENTARY	2.375 V		LVPECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V		30	260	3 mm	4L
SN74AUC1G79DCKRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V	.01 mA		e4	30	260	2 mm	AUC
SN74HC175NE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	25000000 Hz	CMOS		4	TUBE	5	2/6	50 pF	IN-LINE	DIP16,.3	190 ns	5.2 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDIP-T16		6 V	5.08 mm	6.35 mm	Not Qualified	COMPLEMENTARY	2 V	.08 mA		e4			19.3 mm	HC
MC100EP29DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.575 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V	60 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4	30	260	6.5 mm	100E
MC100LVEL51MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2900000000 Hz	ECL		1	TR	3.3	-3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.52 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	DUAL	2800 MHz	S-XDSO-N8	1	3.8 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V		30	260	2 mm	100LVEL
MC10EP29DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		ECL		1	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.5 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V	60 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4	30	260	6.5 mm	10E
MC10EP51MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	3000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.37 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	DUAL		S-XDSO-N8	1	5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V		30	260	2 mm	10E
MC74VHC74MELG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP14,.3	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	3	5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	10.2 mm	AHC/VHC
MC10EP31MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	3000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.41 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		S-XDSO-N8	1	5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e4	30	260	2 mm	10E
74ACT11074NE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	100000000 Hz	CMOS		1	TUBE	5	5	50 pF	IN-LINE	DIP14,.3	9.4 ns	24 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			19.305 mm	ACT
CSSTV32867SGKEREP	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1				26		2.5	2.5		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA96,6X16,32	5.5 ns		Other Logic ICs	.8 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	BOTTOM	200 MHz	R-PBGA-B96	3	2.7 V	1.4 mm	5.5 mm	Not Qualified	TRUE	2.3 V			e0	20	220	13.5 mm	SSTV
SN74AUP1G74DCURG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	40000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	27 ns	4 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	180 MHz	R-PDSO-G8	1	3.6 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2.3 mm	AUP/ULP/V
HEF4027BT-Q100,118	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	2		5			SMALL OUTLINE		210 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	15 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm		COMPLEMENTARY	3 V						9.9 mm	4000/14000/40000
SN74SSTUB32866NMJR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1	410000000 Hz	TTL		25	TR	1.8			GRID ARRAY, LOW PROFILE, FINE PITCH	BGA96,6X16,32	.8 ns			.8 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN SILVER COPPER	BOTTOM	410 MHz	R-PBGA-B96	3	1.9 V	1.4 mm	5.5 mm		TRUE	1.7 V	40 mA		e1	30	260	13.5 mm	SSTU
SN74SSTUB32864NMJR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1	410000000 Hz	CMOS		25	TR	1.8			GRID ARRAY, LOW PROFILE, FINE PITCH	BGA96,6X16,32	.8 ns	8 Amp		.8 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN SILVER COPPER	BOTTOM	410 MHz	R-PBGA-B96	3	1.9 V	1.4 mm	5.5 mm		TRUE	1.7 V	40 mA		e1	30	260	13.5 mm	SSTU

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.