Onsemi Latches & Flip-Flops 183

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC10EP29DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		ECL	1	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.5 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V	60 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	10E
MC10EP35DTR2	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	2	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.49 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	3 mm	10E
MC10EP35DT	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	2	RAIL	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.49 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	3 mm	10E
MC10EP51DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	1	TR	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.37 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	4.9 mm	10E
MC10EP51DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	1	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.37 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	3 mm	10E
MC10EP51D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	1	RAIL	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.37 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	4.9 mm	10E
MC10EP52DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL	1	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.38 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	3 mm	10E
MC10EP52D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL	1	RAIL	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.38 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn80Pb20)	DUAL		R-PDSO-G8		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0	30	235	4.9 mm	10E
MC74ACT273DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS	8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	12 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4		260	6.5 mm	ACT
NLSF1174MNR2	Onsemi	D FLIP-FLOP	MILITARY	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	6000000 Hz	CMOS	6	TR	4.5	2/6	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	165 ns	.02 Amp	FF/Latches	.5 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD		S-PQCC-N16		6 V	1 mm	3 mm	Not Qualified	TRUE	2 V			e0		235	3 mm	1174
MC10H131MEL	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL	2	TR				SMALL OUTLINE	SOP16,.3	1.7 ns		FF/Latches	1.27 mm	75 Cel			POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	250 MHz	R-PDSO-G16			2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY		62 mA		e4		260	10.2 mm	10H
MC10H176M	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL	6	RAIL				SMALL OUTLINE	SOP16,.3	2.2 ns		FF/Latches	1.27 mm	75 Cel			POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	250 MHz	R-PDSO-G16			2.05 mm	5.275 mm	Not Qualified	TRUE		123 mA		e4		260	10.2 mm	10H
MC74HC74AF	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS	1	RAIL	3	2/6	50 pF	SMALL OUTLINE	SOP14,.3	150 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14		6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	HC/UH
MC10H131M	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL	2	RAIL				SMALL OUTLINE	SOP16,.3	1.7 ns		FF/Latches	1.27 mm	75 Cel			POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	250 MHz	R-PDSO-G16			2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY		62 mA		e4		260	10.2 mm	10H
MC74HC74AFEL	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS	1	TR	3	2/6	50 pF	SMALL OUTLINE	SOP14,.3	150 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14		6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	HC/UH
MC10H176MEL	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL	6	TR				SMALL OUTLINE	SOP16,.3	2.2 ns		FF/Latches	1.27 mm	75 Cel			POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	250 MHz	R-PDSO-G16			2.05 mm	5.275 mm	Not Qualified	TRUE		123 mA		e4		260	10.2 mm	10H
MC100E131FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	4		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.675 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	81 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	100E
MC100E131FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	4	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.675 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	81 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	100E
MC100EP451FAG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	6		3.3	-4.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.55 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD		S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	7 mm	100E
MC100LVEL29DWG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		ECL	1	RAIL	3.3	-3.3		SMALL OUTLINE	SOP20,.4	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	1100 MHz	R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	12.8 mm	100LVEL
MC10H130PG	Onsemi	D LATCH	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		ECL	2					IN-LINE	DIP16,.3	1.7 ns		FF/Latches	2.54 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	DUAL		R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY				e3		260	19.175 mm	10H
MC10H131PG	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	250000000 Hz	ECL	2	RAIL				IN-LINE	DIP16,.3	1.7 ns		FF/Latches	2.54 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	DUAL	250 MHz	R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY		62 mA		e3			19.175 mm	10H
MC10H135PG	Onsemi	JBAR-KBAR FLIP-FLOP	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	250000000 Hz	ECL	2	RAIL				IN-LINE	DIP16,.3	2.6 ns		FF/Latches	2.54 mm	75 Cel			POSITIVE EDGE	0 Cel	Tin (Sn)	DUAL	250 MHz	R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY		75 mA		e3		260	19.175 mm	10H
MC10H175PG	Onsemi	D LATCH	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		ECL	5	RAIL				IN-LINE	DIP16,.3	2 ns		FF/Latches	2.54 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	DUAL		R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	TRUE		107 mA		e3		260	19.175 mm	10H
MC14042BCPG	Onsemi	D LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	4	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	440 ns		FF/Latches	2.54 mm	125 Cel			HIGH LEVEL	-55 Cel	Tin (Sn)	DUAL		R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e3			19.175 mm	4000/14000/40000
MC14043BCPG	Onsemi	R-S LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	4	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	350 ns		FF/Latches	2.54 mm	125 Cel		3-STATE	HIGH LEVEL	-55 Cel	Tin (Sn)	DUAL		R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	TRUE	3 V			e3			19.175 mm	4000/14000/40000
MC14044BCPG	Onsemi	R-S LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	4	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	350 ns		FF/Latches	2.54 mm	125 Cel		3-STATE	LOW LEVEL	-55 Cel	Tin (Sn)	DUAL		R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	TRUE	3 V			e3		260	19.175 mm	4000/14000/40000
MC14076BCPG	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	1800000 Hz	CMOS	4	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	600 ns		FF/Latches	2.54 mm	125 Cel		3-STATE	POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	6 MHz	R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	TRUE	3 V			e3	40	260	19.175 mm	4000/14000/40000
MC14099BCPG	Onsemi	D LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	1	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	400 ns		FF/Latches	2.54 mm	125 Cel			LOW LEVEL	-55 Cel	Tin (Sn)	DUAL		R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH	e3	40	260	19.175 mm	4000/14000/40000
MC14175BCPG	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	2000000 Hz	CMOS	4		5	5/15	50 pF	IN-LINE	DIP16,.3	400 ns		FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	6.5 MHz	R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e3		260	19.175 mm	4000/14000/40000
MC14598BCPG	Onsemi	D LATCH	MILITARY	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8		5	5/15	50 pF	IN-LINE	DIP18,.3	320 ns	1.2 Amp	FF/Latches	2.54 mm	125 Cel		3-STATE	HIGH LEVEL	-55 Cel	TIN	DUAL		R-PDIP-T18		18 V	4.57 mm	7.62 mm	Not Qualified	TRUE	3 V			e3		260	22.73 mm	4000/14000/40000
MC74HC74ANG	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	20000000 Hz	CMOS	1	RAIL	3	2/6	50 pF	IN-LINE	DIP14,.3	150 ns	4 Amp	FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	24 MHz	R-PDIP-T14		6 V	4.69 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V			e3	40	260	18.86 mm	HC/UH
MC10EP451FAG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	6		3.3	-5.2		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.55 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD		S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	7 mm	10E
MC74ACT273NG	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	125000000 Hz	CMOS	8	RAIL	5	5	50 pF	IN-LINE	DIP20,.3	12 ns	24 Amp	FF/Latches	2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	125 MHz	R-PDIP-T20		5.5 V	4.57 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e3		260	26.415 mm	ACT
MC14013BCPG	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	2000000 Hz	CMOS	1	RAIL	5	5/15	50 pF	IN-LINE	DIP14,.3	350 ns		FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	7 MHz	R-PDIP-T14		18 V	4.69 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e3		260	18.86 mm	4000/14000/40000
MC14027BDG	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	1500000 Hz	CMOS	2	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	350 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	6.5 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e3	30	260	9.9 mm	4000/14000/40000
MC14099BDWG	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP16,.4	400 ns		FF/Latches	1.27 mm	125 Cel			LOW LEVEL	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	3	18 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH	e3	30	260	10.3 mm	4000/14000/40000
MC14042BDG	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	440 ns		FF/Latches	1.27 mm	125 Cel			HIGH LEVEL	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e3	30	260	9.9 mm	4000/14000/40000
MC74LVX74MG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	50000000 Hz	CMOS	1	RAIL	2.7	3.3	50 pF	SMALL OUTLINE	SOP14,.3	22 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14		3.6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	LV/LV-A/LVX/H
MC100EL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL	1	TUBE	5	-4.5		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
MC10EP51DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	1	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.37 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	10E
MC10EP52DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL	1	TUBE	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP8,.25	.38 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	10E
MC74ACT273DWR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS	8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	12 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	125 MHz	R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e3	30	260	12.8 mm	ACT
MC74HCT273ANG	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS	8	RAIL	5	5	50 pF	IN-LINE	DIP20,.3	35 ns	4 Amp	FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	20 MHz	R-PDIP-T20		5.5 V	4.57 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e3		260	26.415 mm	HCT
MC74HC175AFELG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	4	TR	3	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP16,.3	225 ns	4 Amp	FF/Latches	.65 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	3	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
MC74HC273AFELG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	8	TR	3	2/6	50 pF	SMALL OUTLINE	SOP20,.3	220 ns	6 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G20	3	6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4	30	260	12.575 mm	HC/UH
MC74HC273AFG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	8	RAIL	3	2/6	50 pF	SMALL OUTLINE	SOP20,.3	220 ns	6 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G20	3	6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4	30	260	12.575 mm	HC/UH
MC74HC74AFELG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS	1	TR	3	2/6	50 pF	SMALL OUTLINE	SOP14,.3	150 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14		6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	HC/UH

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.