Onsemi Latches & Flip-Flops 183

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC74HC74AFG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		1	RAIL	3	2/6	50 pF	SMALL OUTLINE	SOP14,.3	150 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14		6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	HC/UH
MC100E143FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9		5			CHIP CARRIER		1 ns			1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100E431FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3	1000000000 Hz	ECL		1	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.85 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	152 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	100E
MC100E452FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		5		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.85 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	100E
MC100EL29DWR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		ECL		1	TR	5	-4.5		SMALL OUTLINE	SOP20,.4	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1100 MHz	R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
MC100EL31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	RAIL	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	100EL
MC100EL35DG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	RAIL	5	+-5		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
MC100EL51DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		1	TUBE	5	-4.5		SMALL OUTLINE	SOP8,.25	.565 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	36 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
MC100EL51DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	1800000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.565 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	36 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	100EL
MC100EL52DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE	SOP8,.25	.465 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
MC100EL52DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	RAIL	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.465 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	100EL
MC100EP131FAG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4	TRAY	3.3	-4.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.6 ns		FF/Latches	.8 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD		S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	130 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	7 mm	100E
MC100EP31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.41 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	4.9 mm	100E
MC100EP31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.41 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	3 mm	100E
MC100EP31DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.41 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	3 mm	100E
MC100EP35DR2G	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	TR	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.49 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	100E
MC100EP35DTG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.49 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
MC100EP51DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.45 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	100E
MC100EP52DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	TUBE	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.38 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	100E
MC100LVEL30DWG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		3		3.3	-3.3		SMALL OUTLINE	SOP20,.4	.82 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1200 MHz	R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	12.8 mm	100LVEL
MC100LVEL30DWR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		3	TR	3.3	-3.3		SMALL OUTLINE	SOP20,.4	.82 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	1200 MHz	R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	12.8 mm	100LVEL
MC100LVEL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2900 MHz	R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	38 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	4.9 mm	100LVEL
MC100LVEL31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2900 MHz	S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	38 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	3 mm	100LVEL
MC100LVEL51DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL		1	TR	3.3	-3.3		SMALL OUTLINE	SOP8,.25	.52 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	2800 MHz	R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	4.9 mm	100LVEL
MC100LVEL51DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.52 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2800 MHz	S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	3 mm	100LVEL
MC10E131FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL		4	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.675 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	70 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	10E
MC10E151FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.9 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	900 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	78 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	10E
MC10E154FNR2G	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	5	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	91 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10E156FNG	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	90 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10E156FNR2G	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	90 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10E167FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	2	6		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1.05 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	1000 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	113 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10E167FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	2	6	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1.05 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	1000 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	113 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	10E
MC10E175FNG	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	132 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.5V	e3		260	11.505 mm	10E
MC10E431FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3		ECL		1	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.85 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	132 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	10E
MC10E451FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1.05 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	101 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10E452FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		5		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.85 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	10E
MC10EL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		1	TUBE	5	-5.2		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
MC10EL31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	10EL
MC10EL31DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	10EL
MC10EL35DG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	RAIL	5	-5.2		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
MC10EL35DR2G	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	TR	5	-5.2		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	4.9 mm	10EL
MC10EL35DTG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.7 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	10EL
MC10EL51DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		1	TUBE	5	-5.2		SMALL OUTLINE	SOP8,.25	.565 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
MC10EL51DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.565 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	10EL
MC10EL52DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		1	TUBE	5	-5.2		SMALL OUTLINE	SOP8,.25	.465 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
MC10EL52DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.465 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	10EL
MC10EP131FAG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4	TRAY	3.3	-5.2		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.6 ns		FF/Latches	.8 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD		S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	120 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	7 mm	10E
MC10EP31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.41 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	3 mm	10E

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.