INDUSTRIAL Multiplexers & Switches 1,324

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
TS5A4624DCKTG4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1		90 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified		63 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	70 ns	3.3 ohm	15 ns	.15 ohm	2 mm	6.5 V
TS5A63157DBVRG4	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.00075 mA	1	1		371 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified		60 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	24 ns	45 ohm	12 ns	.1 ohm	2.9 mm	5.5 V
MAX4355ECQ-TD	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	100	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS		GULL WING	-5.25 V	-3 V	3 V		FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G100		3	5.25 V	1.2 mm		14 mm	Not Qualified		112 dB	2.25 V			-2.25 V	e0								14 mm
MAX4533EWP-T	Maxim Integrated	SPDT	INDUSTRIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING	-18 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	18 V	2.65 mm		7.5 mm	Not Qualified		62 dB	4.5 V	CAN ALSO OPERATE AT 12V NOMINAL		-4.5 V	e0	BREAK-BEFORE-MAKE			250 ns	175 ohm	150 ns	6 ohm	12.8 mm
NLAS6234MUTBG	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	2			NO LEAD			3.3 V	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT		4.5 V	.6 mm		1.4 mm	Not Qualified		70 dB	2.7 V				e4	BREAK-BEFORE-MAKE		260		.55 ohm		.15 ohm	1.8 mm
DG506ADN-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCN	SQUARE	YES	UNSPECIFIED		1	16	CMOS		NO LEAD	-18 V	-15 V	15 V	+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel		QUAD	S-XQCC-N28		1	18 V	2.54 mm	.02 A	11.505 mm	Not Qualified		68 dB	4.5 V			-4.5 V		BREAK-BEFORE-MAKE				450 ohm		16.2 ohm	11.505 mm
MAX336EUI	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	16	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G28			20 V	1.1 mm		4.4 mm	Not Qualified		82 dB	4.5 V			-4.5 V			NOT SPECIFIED	NOT SPECIFIED	500 ns	400 ohm	500 ns	5 ohm	9.7 mm
TS3USB31RSERG4	Texas Instruments	DPDT	INDUSTRIAL	8	VQCCN	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	2		1220 kHz	NO LEAD			3.3 V		CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N8	SEPARATE OUTPUT	1	4.3 V	.6 mm		1.5 mm	Not Qualified	NC	30 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	30 ns	10 ohm	25 ns	.35 ohm	1.5 mm	4.3 V
AD8191AASTZ-RL	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	4			GULL WING			3.3 V		FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100		3	3.6 V	1.6 mm		14 mm	Not Qualified			3 V				e3			260					14 mm
AD8191AASTZ	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	4			GULL WING			3.3 V		FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100		3	3.6 V	1.6 mm		14 mm	Not Qualified			3 V				e3			260					14 mm
AD8193ACPZ	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32		3	3.6 V	1 mm		5 mm	Not Qualified			3 V				e3			260					5 mm
AD8194ACPZ-R7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32		3	3.6 V	1 mm		5 mm	Not Qualified			3 V				e3		30	260					5 mm
AD8194ACPZ	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32		3	3.6 V	1 mm		5 mm	Not Qualified			3 V				e3		30	260					5 mm
AD8197AASTZ-RL	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	4			GULL WING			3.3 V		FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100		3	3.6 V	1.6 mm		14 mm	Not Qualified			3 V				e3		30	260					14 mm
SN74LVC2G53DCTRG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1	CMOS	300 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.3 mm	.1 A	2.8 mm	Not Qualified		50 dB	1.65 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	7.2 ns	30 ohm	7.9 ns	5 ohm	2.95 mm
STMUX3040QTTR	STMicroelectronics	SPDT	INDUSTRIAL	42	QCCN	RECTANGULAR	YES	UNSPECIFIED		8				NO LEAD			1.8 V	1.8	CHIP CARRIER	LCC42,.14X.35,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N42	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260		8 ohm
STG4158BJR	STMicroelectronics	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		BALL			1.8 V	1.8/4.5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		BOTTOM	R-PBGA-B6			4.5 V	.655 mm		.828 mm	Not Qualified		76 dB	1.65 V					BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	160 ns	3 ohm	20 ns	.04 ohm	1.228 mm
STG6684QTR	STMicroelectronics	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			1.8 V	1.8/4	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		QUAD	R-XQCC-N10	SEPARATE OUTPUT		4.3 V	.55 mm		1.4 mm	Not Qualified		80 dB	1.65 V					BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	85 ns	2.9 ohm		.3 ohm	1.8 mm
CBT3251DS,112	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8			GULL WING			5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16		1	5.5 V	1.73 mm		3.9 mm	Not Qualified			4.5 V				e4		30	260	5.8 ns	20 ohm	6.4 ns		4.9 mm
HEF4051BP,652	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.6 mA	1	8	CMOS		THROUGH-HOLE		0 V	15 V	5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16			15 V	4.7 mm	.01 A	7.62 mm	Not Qualified		50 dB	3 V				e4	BREAK-BEFORE-MAKE			80 ns	175 ohm	230 ns	5 ohm	21.6 mm
HEF4052BP,652	NXP Semiconductors	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.6 mA	1	4	CMOS		THROUGH-HOLE		0 V	15 V	5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16			15 V	4.7 mm		7.62 mm	Not Qualified		50 dB	3 V				e4	BREAK-BEFORE-MAKE			85 ns	175 ohm	180 ns	5 ohm	21.6 mm
HEF4053BP,652	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.6 mA	3	2	CMOS		THROUGH-HOLE		0 V	15 V	5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16			15 V	4.7 mm	.01 A	7.62 mm	Not Qualified		50 dB	3 V				e4				140 ns	175 ohm	220 ns	5 ohm	21.6 mm
HEF4066BP,652	NXP Semiconductors	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE		0 V	15 V	5/15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14	SEPARATE OUTPUT			4.2 mm		7.62 mm	Not Qualified	NO	50 dB					e4				30 ns	175 ohm	140 ns	5 ohm	19.025 mm
HEF4067BP,652	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	24	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.6 mA	1	16	CMOS		THROUGH-HOLE		0 V	15 V	5/15	IN-LINE	DIP24,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN	DUAL	R-PDIP-T24				5.1 mm		15.24 mm	Not Qualified		50 dB					e3				100 ns	175 ohm	340 ns	5 ohm	31.7 mm
PCA9546AD,112	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	100 mA	1	4			GULL WING			2.5 V		SMALL OUTLINE	SOP16,.25		1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm		3.9 mm				2.3 V	ALSO OPERATES WITH 4.5 TO 5.5V SUPPLY					30	260	.3 ns	55 ohm	.3 ns		9.9 mm
PCA9546APW,112	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.1 mA	1	4			GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.1 mm		4.4 mm				2.3 V						30	260	.3 ns	55 ohm	.3 ns		5 mm
AD8158ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N100		3	3.3 V	.9 mm		12 mm	Not Qualified			1.6 V				e3		30	260					12 mm
STG5123DTR	STMicroelectronics	SPDT	INDUSTRIAL	6	VSON	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS		NO LEAD			1.8 V	1.8/4	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		DUAL	R-XDSO-N6			4.5 V	.55 mm		1 mm	Not Qualified		75 dB	1.65 V					BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	40 ns	3 ohm		.06 ohm	1.2 mm
STG6384QTR	STMicroelectronics	SPST	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			1.8 V	1.8/4	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		QUAD	R-XQCC-N10	SEPARATE OUTPUT		4.3 V	.55 mm		1.4 mm	Not Qualified	NO	80 dB	1.65 V					BREAK-BEFORE-MAKE			85 ns	2.9 ohm		30 ohm	1.8 mm
NLAS7213MUTAG	Onsemi	DPST	INDUSTRIAL	8	VQCCN	SQUARE	YES	UNSPECIFIED		1	1			NO LEAD			3.3 V	1.8/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N8	SEPARATE OUTPUT		4.5 V	.55 mm		1.5 mm	Not Qualified	NC	20 dB	1.65 V				e4	BREAK-BEFORE-MAKE		260	30 ns	9 ohm	25 ns	.25 ohm	1.5 mm
NLAS7213MUTBG	Onsemi	DPST	INDUSTRIAL	8	VQCCN	SQUARE	YES	UNSPECIFIED		1	1			NO LEAD			3.3 V	1.8/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N8	SEPARATE OUTPUT	1	4.5 V	.55 mm		1.5 mm	Not Qualified	NC	20 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	30 ns	8.5 ohm	25 ns	.07 ohm	1.5 mm
TS5A9411DCKTG4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1		100 kHz	GULL WING			2.5 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NO/NC	84 dB	2.25 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	20 ns	28 ohm	9.5 ns	.06 ohm	2 mm	5.5 V
ADG4613BRUZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-5/12	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	54 dB	3 V			-3 V	e3	BREAK-BEFORE-MAKE	30	260	149 ns	6.1 ohm	149 ns	.05 ohm	5 mm
ADG4613BRUZ	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-5/12	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	54 dB	3 V			-3 V	e3	BREAK-BEFORE-MAKE	30	260	149 ns	6.1 ohm	149 ns	.05 ohm	5 mm
ADG858BCPZ-REEL	Analog Devices	SPDT	INDUSTRIAL	16	VQCCN	SQUARE	YES	UNSPECIFIED		4	2	CMOS		NO LEAD			2.7 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC16,.09SQ,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	5.5 V	.6 mm		2.1 mm	Not Qualified		67 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	59 ns	1.35 ohm	15 ns	.05 ohm	2.1 mm
ADG852BCPZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS		NO LEAD			2.7 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.05X.06,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	5.5 V	.6 mm		1.3 mm	Not Qualified	NO/NC	75 dB	1.8 V				e4	BREAK-BEFORE-MAKE		260	43 ns	1.5 ohm	8 ns	.03 ohm	1.6 mm
ADG854BCPZ-REEL	Analog Devices	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			2.7 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.05X.06,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	5.5 V	.6 mm		1.3 mm	Not Qualified		75 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	43 ns	1.5 ohm	8 ns	.03 ohm	1.6 mm
ADN4600ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	64	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8			NO LEAD			1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N64		3	3.6 V	1 mm		9 mm	Not Qualified			1.7 V				e3		30	260					9 mm
ADV3200ASWZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	176	HLFQFP	SQUARE	YES	PLASTIC/EPOXY		1	32			GULL WING	-2.75 V	-2.5 V	2.5 V	2.5	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP176,1.0SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G176	SEPARATE OUTPUT	3	2.75 V	1.6 mm		24 mm	Not Qualified		90 dB	2.25 V			-2.25 V	e3			260					24 mm
ADV3201ASWZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	176	HLFQFP	SQUARE	YES	PLASTIC/EPOXY		1	32			GULL WING	-3.63 V	-3.3 V	3.3 V	3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP176,1.0SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G176	SEPARATE OUTPUT	3	3.63 V	1.6 mm		24 mm	Not Qualified		90 dB	2.97 V			-2.97 V	e3			260					24 mm
ADV3202ASWZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	176	HLFQFP	SQUARE	YES	PLASTIC/EPOXY		1	32			GULL WING	-2.75 V	-2.5 V	2.5 V	2.5	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP176,1.0SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G176	SEPARATE OUTPUT	3	2.75 V	1.6 mm		24 mm	Not Qualified		80 dB	2.25 V			-2.25 V	e3			260					24 mm
ADV3203ASWZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	176	HLFQFP	SQUARE	YES	PLASTIC/EPOXY		1	32			GULL WING	-3.63 V	-3.3 V	3.3 V	3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP176,1.0SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G176	SEPARATE OUTPUT	3	3.63 V	1.6 mm		24 mm	Not Qualified		80 dB	2.97 V			-2.97 V	e3			260					24 mm
NLAS7223CMUTBG	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	2			NO LEAD			3.3 V	1.8/4.3	CHIP CARRIER	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT		4.5 V	.6 mm		1.4 mm	Not Qualified		21 dB	1.65 V				e4	BREAK-BEFORE-MAKE		260	30 ns		25 ns	.7 ohm	1.8 mm
ADV3221ARZ-R7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	8 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1					Not Qualified							e3		30	260
ADV3221ARZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	8 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1					Not Qualified							e3		30	260
ADV3222ARZ-R7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	9 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1					Not Qualified							e3		30	260
ADV3222ARZ-RL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	9 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1					Not Qualified							e3		30	260
ADV3222ARZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	9 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1					Not Qualified							e3		30	260

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.