INDUSTRIAL Multiplexers & Switches 1,324

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG729BRU-REEL	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	5.5 V	1.1 mm	.01 A	4.4 mm	Not Qualified		55 dB	2.7 V				e0	BREAK-BEFORE-MAKE	30	240	200 ns	11 ohm	180 ns	.4 ohm	5 mm
ADG729BRU-REEL7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	5.5 V	1.1 mm	.01 A	4.4 mm	Not Qualified		55 dB	2.7 V				e0	BREAK-BEFORE-MAKE	30	240	200 ns	11 ohm	180 ns	.4 ohm	5 mm
ADG731BCP-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	HVQCCN	SQUARE	YES	UNSPECIFIED		1	32	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N48		3	2.75 V	1 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE		240	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm
ADG774ABRQ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	2	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	3.3 V	1.7526 mm		3.9116 mm	Not Qualified		65 dB	2.7 V	ALSO OPERATES WITH 5V NOMINAL SUPPLY			e0	BREAK-BEFORE-MAKE		240	14 ns	6 ohm	8 ns	.15 ohm	4.9022 mm
DG409EUE	Maxim Integrated	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	2	4	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	20 V	1.1 mm	.03 A	4.4 mm	Not Qualified		75 dB	5 V			-5 V	e0	BREAK-BEFORE-MAKE	20	240	225 ns	100 ohm	300 ns	1.5 ohm	5 mm
ISL43142IR	Intersil	SPST	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		NO LEAD	-6 V	-5 V	5 V	3/12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-N16		1	6 V	1 mm		3 mm	Not Qualified	NO/NC		2 V			-2 V	e0	BREAK-BEFORE-MAKE			80 ns	65 ohm	30 ns	2 ohm	3 mm
MAX4737EBE-T	Maxim Integrated	SPST	INDUSTRIAL	16	VFBGA	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA16,4X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	S-PBGA-B16	SEPARATE OUTPUT	1	5.5 V	.67 mm		2.02 mm	Not Qualified	NO	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		245	80 ns	4.5 ohm	40 ns	.1 ohm	2.02 mm
MAX4750EUD	Maxim Integrated	SPDT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G14		1	11 V	1.1 mm		4.4 mm	Not Qualified		72 dB	2 V				e0	BREAK-BEFORE-MAKE		245	150 ns	50 ohm	60 ns	.2 ohm	5 mm
SN65LVCP22D	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.087 mA	1	2	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm		3.9 mm	Not Qualified			3 V	CONFIGURABLE AS 2:1 MUX, 1:2 DEMUX, REPEATER OR 1:2 SIGNAL SPLITTER			e4		30	260	4 ns		4 ns		9.9 mm
SN65LVCP23PWR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.087 mA	1	2	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V				e4		30	260	2.5 ns		2.5 ns		5 mm
SN65LVDS125DBT	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G38	SEPARATE OUTPUT		3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V						NOT SPECIFIED	NOT SPECIFIED	50 ns		6 ns		9.7 mm
SN65LVDT125DBT	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G38	SEPARATE OUTPUT		3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V						NOT SPECIFIED	NOT SPECIFIED	50 ns		6 ns		9.7 mm
SN74LVC2G53DCUT	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1	CMOS	300 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexers or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	.9 mm	.1 A	2 mm	Not Qualified		50 dB	1.65 V				e3	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	7.2 ns	30 ohm	7.9 ns	5 ohm	2.3 mm
SN74LVC2G53YEPR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.001 mA	1	2	CMOS		BALL			2.3 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		BOTTOM	R-XBGA-B8			5.5 V	.5 mm	.1 A	.9 mm	Not Qualified		50 dB	1.65 V						NOT SPECIFIED	NOT SPECIFIED	7.2 ns	20 ohm	8.3 ns	5 ohm	1.9 mm
MAX4708EPE	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.75 mA	1	8	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16		1	20 V	4.572 mm	.03 A	7.62 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE		245	400 ns	400 ohm	250 ns	15 ohm	19.175 mm
MAX4709EPE	Maxim Integrated	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.75 mA	1	4	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16		1	20 V	4.572 mm	.03 A	7.62 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE		245	400 ns	400 ohm	250 ns	15 ohm	19.175 mm
ADG419BRM-REEL	Analog Devices	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	TSSOP8,.19	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	16.5 V	1.75 mm		3.9 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	160 ns		4.9 mm
ADG702BRM-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns		3 mm
ADG707BRU-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28		1	2.75 V	1.1 mm	.03 A	4.4 mm	Not Qualified		80 dB	2.25 V	CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES		-2.25 V	e0	BREAK-BEFORE-MAKE		240	50 ns	4.5 ohm	26 ns	.3 ohm	9.7 mm
ADG711BRU-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e0	BREAK-BEFORE-MAKE	30	240	20 ns	8 ohm	12 ns	.1 ohm	5 mm
ADG712BR-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e0	BREAK-BEFORE-MAKE		240	20 ns	8 ohm	12 ns	.1 ohm	9.9 mm
ADG712BRU-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NO	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e0	BREAK-BEFORE-MAKE	30	240	20 ns	8 ohm	12 ns	.1 ohm	5 mm
ADG715BRU-REEL	Analog Devices	SPST	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		8	1	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G24	SEPARATE OUTPUT	1	2.75 V	1.2 mm		4.4 mm	Not Qualified	NC	60 dB	2.25 V	ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE		240	200 ns	4.5 ohm	190 ns	.4 ohm	7.8 mm
ADG728BRU-REEL	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	5.5 V	1.1 mm	.01 A	4.4 mm	Not Qualified		55 dB	2.7 V				e0	BREAK-BEFORE-MAKE	30	240	200 ns	11 ohm	180 ns	.4 ohm	5 mm
ADG734BRU-REEL	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	2.75 V	1.2 mm		4.4 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE		240	35 ns	4.5 ohm	16 ns	.1 ohm	6.5 mm
ADG738BRU-REEL	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	5.5 V	1.1 mm	.01 A	4.4 mm	Not Qualified		55 dB	2.7 V				e0	BREAK-BEFORE-MAKE	30	240	70 ns	11 ohm	25 ns	.4 ohm	5 mm
ADG739BRU-REEL	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	5.5 V	1.1 mm	.01 A	4.4 mm	Not Qualified		55 dB	2.7 V				e0	BREAK-BEFORE-MAKE	30	240	70 ns	11 ohm	25 ns	.4 ohm	5 mm
ADG751ART-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.65 mm	Not Qualified		65 dB	1.8 V	SINGLE T-SWITCH			e0	BREAK-BEFORE-MAKE		240	19 ns	50 ohm	6 ns		2.9 mm
ADG751BRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.65 mm	Not Qualified		75 dB	1.8 V	SINGLE T-SWITCH			e0	BREAK-BEFORE-MAKE		240	19 ns	90 ohm	6 ns		2.9 mm
ADG752BRM-REEL	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	S-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.09 mm		3 mm	Not Qualified	NO/NC	80 dB	1.8 V	CAN ALSO BE OPERATED FROM 4.5 TO 5.5V			e0	BREAK-BEFORE-MAKE		240	18 ns	50 ohm	8 ns	.2 ohm	3 mm
ADG752BRT-REEL	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.45 mm		1.65 mm	Not Qualified	NO/NC	80 dB	1.8 V	CAN ALSO BE OPERATED FROM 4.5 TO 5.5V			e0	BREAK-BEFORE-MAKE		240	18 ns	50 ohm	8 ns	.2 ohm	2.9 mm
MAX4051AEEE-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V	IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY		-2.7 V	e0	BREAK-BEFORE-MAKE	20	240	175 ns	100 ohm	150 ns	6 ohm	4.9 mm
MAX4359EWG-T	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	24	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4			GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP24,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G24	SEPARATE OUTPUT		5.5 V	2.65 mm		7.5 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e0	BREAK-BEFORE-MAKE			50 ns		35 ns		15.4 mm
MAX4360EAX-T	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8			GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE, SHRINK PITCH	SOP36,.4,32	Multiplexer or Switches	.8 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G36	SEPARATE OUTPUT	1	5.5 V	2.64 mm		7.495 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e0	BREAK-BEFORE-MAKE			50 ns		35 ns		15.415 mm
MAX4514EUK-T	Maxim Integrated	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			5 V	3/12	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		1	12 V	1.45 mm		1.625 mm	Not Qualified	NO	90 dB	2 V				e0	BREAK-BEFORE-MAKE			150 ns	20 ohm	100 ns	1 ohm	2.9 mm
MAX4516EUK-T	Maxim Integrated	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	1	CMOS		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		1	6 V	1.45 mm		1.625 mm	Not Qualified	NO	86 dB	1 V				e0	BREAK-BEFORE-MAKE			100 ns	20 ohm	75 ns		2.9 mm
MAX4517EUK-T	Maxim Integrated	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	1	CMOS		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		1	6 V	1.45 mm		1.625 mm	Not Qualified	NC	86 dB	1 V				e0	BREAK-BEFORE-MAKE			100 ns	20 ohm	75 ns		2.9 mm
MAX4659EUA-T	Maxim Integrated	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-20 V	-15 V	15 V	9/40/+-4.5/+-20	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	20 V	1.1 mm		3 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE		245	150 ns	25 ohm	150 ns	.4 ohm	3 mm
MAX4696EBT-T	Maxim Integrated	SPST	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	R-PBGA-B6		1	5.5 V	.67 mm		1.75 mm	Not Qualified	NO	75 dB	2 V				e0	BREAK-BEFORE-MAKE		245	80 ns	35 ohm	25 ns		1.98 mm
MAX4697EBT-T	Maxim Integrated	SPST	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	R-PBGA-B6		1	5.5 V	.67 mm		1.75 mm	Not Qualified	NC	75 dB	2 V				e0	BREAK-BEFORE-MAKE		245	80 ns	35 ohm	25 ns		1.98 mm
MAX4025EUP	Maxim Integrated	VIDEO MULTIPLEXER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	48 mA	4	2	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		1	5.5 V	1.1 mm	.02 A	4.4 mm	Not Qualified			2.25 V			-2.25 V	e0								6.5 mm
MAX4026EUP	Maxim Integrated	VIDEO MULTIPLEXER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	48 mA	4	2	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		1	5.5 V	1.1 mm	.02 A	4.4 mm	Not Qualified			2.25 V			-2.25 V	e0								6.5 mm
ADG409BRU	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	4	CMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.2 mm	.02 A	4.4 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e0	BREAK-BEFORE-MAKE	30	240	150 ns	100 ohm	150 ns	15 ohm	5 mm
MAX9391EHJ	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	32	TFQFP	SQUARE	YES	PLASTIC/EPOXY		2	2	BIPOLAR		GULL WING			3.3 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G32	SEPARATE OUTPUT	1	3.6 V	1.2 mm		5 mm	Not Qualified			3 V				e0				.565 ns		.53 ns		5 mm
MAX9392EHJ	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	32	TFQFP	SQUARE	YES	PLASTIC/EPOXY		2	2	BIPOLAR		GULL WING			3.3 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G32	SEPARATE OUTPUT	1	3.6 V	1.2 mm		5 mm	Not Qualified			3 V				e0				.574 ns		.555 ns		5 mm
SN74AHC4066D	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	4	4	CMOS	50 kHz	GULL WING			2.3 V	2/5.5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO	40 dB	2 V				e4	BREAK-BEFORE-MAKE	30	260	25 ns	225 ohm	25 ns	6 ohm	8.65 mm
SN74LV4053ATPWREP	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	3	3	CMOS	50 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	180 ohm	28 ns	2 ohm	5 mm	5.5 V
MAX312FEPE	Maxim Integrated	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V	12/+-15	IN-LINE	DIP16,.25	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	20 V	4.572 mm		7.62 mm	Not Qualified	NC	55 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			225 ns	10 ohm	185 ns	.05 ohm	19.175 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.