INDUSTRIAL Multiplexers & Switches 1,324

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG936BRU-R-500RL7	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		36 dB	1.65 V				e0			240	14 ns		13 ns		6.5 mm
ADG936BRU-R-REEL7	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		36 dB	1.65 V				e0			240	14 ns		13 ns		6.5 mm
ADG936BRU-R-REEL	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		36 dB	1.65 V				e0			240	14 ns		13 ns		6.5 mm
MAX4735ETE	Maxim Integrated	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		NO LEAD			2.7 V	3/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1	3.6 V	.8 mm		3 mm	Not Qualified		66 dB	1.6 V				e0	BREAK-BEFORE-MAKE		245	200 ns	.4 ohm	180 ns	.015 ohm	3 mm
NLAS4783MN1R2G	Onsemi	SPDT	INDUSTRIAL	16	HVSSOP	SQUARE	YES	PLASTIC/EPOXY		3	1			GULL WING			2.7 V	1.8/3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	4.7 V	1 mm		3 mm	Not Qualified	NC	62 dB	1.65 V				e3	BREAK-BEFORE-MAKE	30	260	27 ns	1 ohm	20 ns		3 mm
STMUX1000LQTR	STMicroelectronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	56	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	16			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.19X.43,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-PQCC-N56		1	3.6 V	.8 mm		5 mm	Not Qualified		36 dB	3 V				e4		30	260	50 ns	7.5 ohm	30 ns	.5 ohm	11 mm
MAX4702ETE	Maxim Integrated	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD			3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	5.5 V	.8 mm		3 mm	Not Qualified		76 dB	1.8 V				e0	BREAK-BEFORE-MAKE		245	35 ns	75 ohm	20 ns	2 ohm	3 mm
AD8180ARZ-RL	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	4.75 mA	1	2	BIPOLAR		GULL WING	-6 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1	6 V	1.75 mm		3.9 mm	Not Qualified		89 dB	4 V			-4 V	e3		30	260	10 ns				4.9 mm
AD8186ARUZ-R7	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	2	BIPOLAR		GULL WING			5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G24		1	5.5 V	1.2 mm		4.4 mm	Not Qualified		84 dB	3.5 V				e3			260					7.8 mm
ADG507AKRUZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		1	16.5 V	1.2 mm		4.4 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3		30	260	300 ns	450 ohm	300 ns	22.5 ohm	9.7 mm
ADG728BRUZ-REEL	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm	.01 A	4.4 mm	Not Qualified		75 dB	2.7 V				e3	BREAK-BEFORE-MAKE	30	260	200 ns	11 ohm	180 ns	.4 ohm	5 mm
MPC506AUG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	1	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	COMMON OUTPUT	2		2.65 mm	.02 A	7.5 mm	Not Qualified	NO	68 dB			-15 V		e4	BREAK-BEFORE-MAKE	30	260	500 ns	1800 ohm	500 ns		17.9 mm	15 V
MPC508AU/1KG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	COMMON OUTPUT	2		2.65 mm	.02 A	7.5 mm	Not Qualified	NO	68 dB			-15 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	500 ns	1500 ohm	500 ns		10.3 mm	15 V
MPC508AUG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	COMMON OUTPUT	2		2.65 mm	.02 A	7.5 mm	Not Qualified	NO	68 dB			-15 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	500 ns	1500 ohm	500 ns		10.3 mm	15 V
MPC509AU/1KG4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	COMMON OUTPUT	2		2.65 mm	.02 A	7.5 mm	Not Qualified	NO	68 dB			-15 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	500 ns	1500 ohm	500 ns		10.3 mm	15 V
ADG452BRUZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.2 mm		4.4 mm	Not Qualified	NO	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	220 ns	12 ohm	140 ns	.3 ohm	5 mm
ADG453BRUZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	220 ns	12 ohm	140 ns	.3 ohm	5 mm
ADG741BKS-R2	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.1 mm		1.25 mm	Not Qualified	NO	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e0	BREAK-BEFORE-MAKE			20 ns	5 ohm	13 ns		2 mm
ADG741BKSZ5-REEL	Analog Devices	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5		1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NO	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2 mm
ADG742BKSZ-R2	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e4	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2 mm
ADG742BKSZ5-REEL	Analog Devices	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5		1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2 mm
ADG884BRMZ-REEL	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	60 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	56 ns	.5 ohm	19 ns	.02 ohm	3 mm
DG403BDJ-E3	Vishay Intertechnology	SPDT	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1		5.08 mm		7.62 mm	Not Qualified	NO/NC	72 dB					e3	BREAK-BEFORE-MAKE	30	260	150 ns	45 ohm	100 ns	3 ohm	20.13 mm
ADG884BCBZ-REEL	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	10	VFBGA	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		BALL			2.7 V	2/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA10,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B10	SEPARATE OUTPUT	1	5.5 V	.63 mm		1.5 mm	Not Qualified		60 dB	1.8 V				e1	BREAK-BEFORE-MAKE		260	56 ns	.5 ohm	19 ns	.02 ohm	2 mm
NBSG72AMNR2G	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	+-2.5/+-3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.465 V	1 mm		3 mm	Not Qualified			2.375 V	NECL MODE: 0V VCC WITH VEE = -2.375V TO -3.465V					30	260					3 mm
TS5A3154DCURE4	Texas Instruments	SPDT	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	.9 mm		2 mm	Not Qualified		64 dB	1.65 V				e4	MAKE-BEFORE-BREAK	30	260	21 ns	2.7 ohm	30 ns	.16 ohm	2.3 mm
TS5A3154DCURG4	Texas Instruments	SPDT	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1		100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	.9 mm		2 mm	Not Qualified		64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	21 ns	3.1 ohm	30 ns	.16 ohm	2.3 mm	5.5 V
ADG409BNZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.5 mA	1	4	CMOS		THROUGH-HOLE		-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16				5.33 mm		7.62 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e3	BREAK-BEFORE-MAKE			150 ns	100 ohm	150 ns	15 ohm	20.07 mm
ADG417BNZ	Analog Devices	SPST	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	CMOS		THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T8				5.33 mm		7.62 mm	Not Qualified		80 dB					e3				160 ns	35 ohm	100 ns		9.88 mm
ADG426BNZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.5 mA	1	16	BICMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T28			16.5 V	6.35 mm	.02 A	15.24 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE			150 ns	80 ohm	150 ns	4 ohm	37.4 mm
ADG428BPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.1 mA	1	8	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1		4.57 mm	.03 A	8.965 mm	Not Qualified		75 dB					e3	BREAK-BEFORE-MAKE		260	225 ns	100 ohm	300 ns	10 ohm	8.965 mm
ADG428BRZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	18	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.1 mA	1	8	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP18,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G18		1		2.65 mm	.03 A	7.5 mm	Not Qualified		75 dB					e3	BREAK-BEFORE-MAKE	40	260	225 ns	100 ohm	300 ns	10 ohm	11.55 mm
ADG441BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	4.57 mm		7.62 mm	Not Qualified	NC	60 dB	13.5 V	CAN ALSO OPERATE WITH 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE			110 ns	70 ohm	60 ns	1 ohm	19.43 mm
ADG442BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	4.57 mm		7.62 mm	Not Qualified	NO	60 dB	13.5 V	CAN ALSO OPERATE WITH 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE			110 ns	70 ohm	60 ns	1 ohm	19.43 mm
ADG453BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-20 V	-5 V	5 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT		20 V	5.33 mm		7.62 mm	Not Qualified	NO/NC	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE			220 ns	12 ohm	140 ns	.3 ohm	20.07 mm
ADG509AKPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	22.5 ohm	8.965 mm
ADG526AKNZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1.5 mA	1	16	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T28			16.5 V	5.08 mm	.02 A	15.24 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	5 ohm	36.205 mm
ADG526AKPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	5 ohm	11.505 mm
ADG527AKPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	5 ohm	11.505 mm
ADG528AKPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm		8.965 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3			260	300 ns	450 ohm	300 ns	5 ohm	8.965 mm
ADG528AKPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm		8.965 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3			260	300 ns	450 ohm	300 ns	5 ohm	8.965 mm
ADG528FBPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE	40	260	400 ns	400 ohm	400 ns	15 ohm	8.965 mm
ADG752BRMZ	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.09 mm		3 mm	Not Qualified		80 dB	1.8 V	CAN ALSO BE OPERATED FROM 4.5 TO 5.5V			e3		30	260	18 ns	50 ohm	8 ns	.2 ohm	3 mm
ADG201HSKRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm		3.9 mm	Not Qualified		72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE		-13.5 V	e3		30	260	50 ns	50 ohm	50 ns	3 ohm	9.9 mm
ADG413BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	4.57 mm		7.62 mm	Not Qualified	NO/NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE			175 ns	35 ohm	145 ns		19.43 mm
ADG428BNZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	18	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.1 mA	1	8	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP18,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T18				4.48 mm	.03 A	7.62 mm	Not Qualified		75 dB					e3	BREAK-BEFORE-MAKE			225 ns	100 ohm	300 ns	10 ohm	22.865 mm
ADG428BRZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	18	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.1 mA	1	8	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP18,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G18		1		2.65 mm	.03 A	7.5 mm	Not Qualified		75 dB					e3	BREAK-BEFORE-MAKE		260	150 ns	100 ohm	150 ns	10 ohm	11.55 mm
ADG432BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	5.33 mm		7.62 mm	Not Qualified		68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e3				165 ns	24 ohm	130 ns	.85 ohm	20.13 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.