INDUSTRIAL Multiplexers & Switches 1,324

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG433BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE	-16.5 V	-15 V	15 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	5.33 mm		7.62 mm	Not Qualified		68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e3				165 ns	24 ohm	130 ns	.85 ohm	20.13 mm
ADG444BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	4.57 mm		7.62 mm	Not Qualified	NC	60 dB	13.5 V	CAN ALSO OPERATE WITH 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE			110 ns	70 ohm	60 ns	1 ohm	19.43 mm
ADG452BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE	-20 V	-5 V	5 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT		20 V	5.33 mm		7.62 mm	Not Qualified	NO	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE			220 ns	12 ohm	140 ns	.3 ohm	20.07 mm
ADG509FBRWZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS			GULL WING	-16.5 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	390 ohm	150 ns	8.1 ohm	10.3 mm
ADG512BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	MIL-STD-883		THROUGH-HOLE	-5.5 V	-5 V	5 V	3.3/+-5	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT		5.5 V	5.33 mm		7.62 mm	Not Qualified	NO	68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE			375 ns	50 ohm	150 ns		20.13 mm
ADG513BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	MIL-STD-883		THROUGH-HOLE	-5.5 V	-5 V	5 V	3.3/5/+-5	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT		5.5 V	5.33 mm		7.62 mm	Not Qualified	NO/NC	68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE			375 ns	50 ohm	150 ns		20.13 mm
ADG526AKRZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS			GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	450 ohm	300 ns	5 ohm	12.8 mm
ADG602BRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e4	BREAK-BEFORE-MAKE		260	120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG608BNZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	BICMOS			THROUGH-HOLE	-5.5 V	-5 V	5 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			5.5 V	5.33 mm		7.62 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE		-4.5 V	e3				75 ns	30 ohm	75 ns	2 ohm	20.13 mm
ADG609BNZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	4	BICMOS			THROUGH-HOLE	-5.5 V	-5 V	5 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			5.5 V	5.33 mm		7.62 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE		-4.5 V	e3				75 ns	30 ohm	75 ns	2 ohm	20.13 mm
ADG622BRMZ	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG622BRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG622BRMZ-REEL7	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG623BRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG623BRMZ-REEL7	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG712BRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e3	BREAK-BEFORE-MAKE		260	20 ns	8 ohm	12 ns	.1 ohm	9.9 mm
ADG715BRUZ-REEL	Analog Devices	SPST	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	25 mA	8	1	CMOS			GULL WING	-2.75 V	-2.5 V	2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G24	SEPARATE OUTPUT	1	2.75 V	1.2 mm		4.4 mm	Not Qualified	NO	60 dB	2.25 V	ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY	0 V	-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	4.5 ohm	190 ns	.4 ohm	7.8 mm	2.5 V
ADG751BRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.09 mm		3 mm	Not Qualified		75 dB	1.8 V	SINGLE T-SWITCH			e3			260	19 ns	90 ohm	6 ns		3 mm
ADG752BRMZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	3.3 V	1.09 mm		3 mm	Not Qualified		80 dB	2.7 V	CAN ALSO BE OPERATED FROM 4.5 TO 5.5V			e3			260	18 ns	50 ohm	8 ns	.2 ohm	3 mm
ADG759BCPZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	VQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	.001 mA	1	4	CMOS			NO LEAD	-2.75 V	-2.5 V	2.5 V	+-3/1.8/5.5	CHIP CARRIER, VERY THIN PROFILE	LCC20,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-CQCC-N20		3	2.75 V	.9 mm	.03 A	4 mm	Not Qualified		80 dB	2.25 V	CAN ALSO OPERATE AT 5V NOMINAL		-2.25 V	e3	BREAK-BEFORE-MAKE		260	25 ns	4.5 ohm	15 ns	.4 ohm	4 mm
ADG783BCPZ	Analog Devices	SPST	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS			NO LEAD			3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20		3	5.5 V	.9 mm		4 mm	Not Qualified		58 dB	1.8 V	CAN ALSO OPERATE AT 5V NOMINAL			e3			260	20 ns	10 ohm	12 ns	.1 ohm	4 mm
MUX08FPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	JFET			THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16				5.33 mm		7.62 mm	Not Qualified		60 dB		OVERVOLTAGE PROTECTION			e3				2000 ns	400 ohm	400 ns	27 ohm	20.13 mm
MUX08FSZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	JFET			GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		60 dB		OVERVOLTAGE PROTECTION			e3		30	260	2000 ns	400 ohm	400 ns	27 ohm	9.9 mm
AD8174ANZ	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	4				THROUGH-HOLE	-6 V	-5 V	5 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T14			6 V	5.33 mm		7.62 mm	Not Qualified		72 dB	4 V			-4 V	e3								19.305 mm
AD8184ANZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	5.7 mA	1	4	BIPOLAR			THROUGH-HOLE		-5 V	5 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T14				5.33 mm		7.62 mm	Not Qualified							e3								19.305 mm
ADG407BNZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.5 mA	1	8	BICMOS			THROUGH-HOLE	-16.5 V	-15 V	15 V	12/+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T28			16.5 V	6.35 mm	.02 A	15.24 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE			150 ns	80 ohm	150 ns	4 ohm	37.4 mm
ADG428BPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.1 mA	1	8	CMOS			J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1		4.57 mm	.03 A	8.965 mm	Not Qualified		75 dB					e3	BREAK-BEFORE-MAKE		260	150 ns	100 ohm	150 ns	10 ohm	8.965 mm
ADG601BRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	2.5 ohm	75 ns	.35 ohm	3 mm
ADG602BRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	2.5 ohm	75 ns	.35 ohm	3 mm
ADG701BRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	20 ns	5 ohm	13 ns		3 mm
ADG702BRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	20 ns	5 ohm	13 ns		3 mm
ADG751ARMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.09 mm		3 mm	Not Qualified		65 dB	1.8 V	SINGLE T-SWITCH			e3		30	260	19 ns	50 ohm	6 ns		3 mm
SN74LV4052ADBRE4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	2	CMOS		50 kHz	GULL WING			2.5 V	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	2 mm	.05 A	5.3 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	35 ns	225 ohm	35 ns	1.5 ohm	6.2 mm	5.5 V
NB4N840MMNG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		2	2	CMOS			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	1	3.6 V	1 mm		5 mm	Not Qualified			3 V				e3		30	260	.135 ns	57.5 ohm	.135 ns		5 mm
NB4N840MMNR4G	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		2	2	CMOS			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	1	3.6 V	1 mm		5 mm	Not Qualified			3 V				e3		30	260	.135 ns	57.5 ohm	.135 ns		5 mm
74LVC1G3157DBVRE4	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA	1	1	CMOS		340 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexers or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	57 dB	1.65 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	14 ns	30 ohm	7.5 ns	.1 ohm	2.9 mm
74LVC1G3157DCKRE4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA	1	1	CMOS		340 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	57 dB	1.65 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	14 ns	30 ohm	7.5 ns	.1 ohm	2 mm
SN74LVC2G53DCURE4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	2	CMOS			GULL WING			2.3 V	3.3	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexers or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8			5.5 V	.9 mm	.1 A	2 mm	Not Qualified		50 dB	1.65 V						NOT SPECIFIED	NOT SPECIFIED	7.2 ns	20 ohm	7.9 ns	5 ohm	2.3 mm
SN74LVC2G53DCUTE4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	2	CMOS			GULL WING			2.3 V	3.3	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexers or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8			5.5 V	.9 mm	.1 A	2.3 mm	Not Qualified		50 dB	1.65 V						NOT SPECIFIED	NOT SPECIFIED	7.2 ns	20 ohm	7.9 ns	5 ohm	5 mm
TS5A23157DGSTG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.01 mA	2	1				GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	60 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	24 ns	140 ohm	13 ns	1 ohm	3 mm	5.5 V
SN65LVCP22DG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.087 mA	1	2	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm		3.9 mm	Not Qualified			3 V	CONFIGURABLE AS 2:1 MUX, 1:2 DEMUX, REPEATER OR 1:2 SIGNAL SPLITTER			e4		30	260	4 ns		4 ns		9.9 mm
SN65LVCP23PWRG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.087 mA	1	2	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V				e4		NOT SPECIFIED	260	2.5 ns		2.5 ns		5 mm
SN74AUC1G66DBVRE4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1	CMOS			GULL WING			1.65 V	1.2/2.5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	COMMON OUTPUT	1	2.7 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	.8 V				e4	MAKE-BEFORE-BREAK	30	260	1.1 ns	20 ohm	2.9 ns		2.9 mm
SN74AUC1G66DCKRE4	Texas Instruments	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1	CMOS		500 kHz	GULL WING			1.65 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5		1	2.7 V	1.1 mm		1.25 mm	Not Qualified		55 dB	.8 V				e4		30	260	1.1 ns	20 ohm	2.9 ns		2 mm
SN74AUC2G53DCURE4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	2	CMOS			GULL WING			1.1 V	1.2/2.5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1	2.7 V	.9 mm	.1 A	2 mm	Not Qualified		59 dB	.8 V	BUILT-IN SPDT SWITCH			e4		30	260	3.6 ns	40 ohm	3.6 ns	4 ohm	2.3 mm
SN74AUC2G66DCURE4	Texas Instruments	SPST	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	2	1	CMOS		500 kHz	GULL WING			1.1 V	1.2/2.5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	COMMON OUTPUT	1	2.7 V	.9 mm		2 mm	Not Qualified	NO	50 dB	.8 V				e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	3 ns	40 ohm	4 ns	3 ohm	2.3 mm
SN74HC4066DRE4	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	4	1	CMOS		30 kHz	GULL WING			4.5 V	2/6	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	6 V	1.75 mm		3.905 mm	Not Qualified	NO	42 dB	2 V				e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	36 ns	85 ohm	40 ns		8.65 mm
SN74HC4066DRG4	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	4	4	CMOS		30 kHz	GULL WING			4.5 V	2/6	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	6 V	1.75 mm		3.905 mm	Not Qualified	NO	42 dB	2 V				e4	MAKE-BEFORE-BREAK	30	260	36 ns	150 ohm	40 ns		8.65 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.