INDUSTRIAL Multiplexers & Switches 1,324

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG508FBRNZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	390 ohm	150 ns	8.1 ohm	9.9 mm
ADG511BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	MIL-STD-883	GULL WING	-5.5 V	-5 V	5 V	3.3/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	375 ns	50 ohm	150 ns		9.9 mm
ADG511BRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3.3/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	375 ns	50 ohm	150 ns		9.9 mm
ADG513BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	MIL-STD-883	GULL WING	-5.5 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	375 ns	50 ohm	150 ns		9.9 mm
ADG513BRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	375 ns	50 ohm	150 ns		9.9 mm
ADG609BRUZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm	.02 A	4.4 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	75 ns	30 ohm	75 ns	2 ohm	5 mm
ADG609BRZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	1	4	BICMOS		GULL WING	-5.5 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	75 ns	30 ohm	75 ns	2 ohm	9.9 mm
ADG623BRMZ	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG702BRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2.9 mm
ADG709CRUZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	2.75 V	1.2 mm	.03 A	4.4 mm	Not Qualified		60 dB	2.25 V	ALSO OPERATE WITH 1.8V TO 5.5V SINGLE SUPPLY		-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	25 ns	4.5 ohm	15 ns	.4 ohm	5 mm
ADG711BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	12 ns	.1 ohm	9.9 mm
ADG713BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	12 ns	.1 ohm	9.9 mm
ADG713BRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	12 ns	.1 ohm	9.9 mm
ADG713BRZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	12 ns	.1 ohm	9.9 mm
ADG742BKSZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e4	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2 mm
ADV3226ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HVQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		1	16			NO LEAD	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC100,.47SQ,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-CQCC-N100	SEPARATE OUTPUT	3	5.5 V	.9 mm		12 mm	Not Qualified		80 dB	4.5 V			-4.5 V	e3								12 mm
ADV3227ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HVQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		1	16			NO LEAD	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC100,.47SQ,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-CQCC-N100	SEPARATE OUTPUT	3	5.5 V	.9 mm		12 mm	Not Qualified		75 dB	4.5 V			-4.5 V	e3			260					12 mm
SN65LVCP202RGET	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.115 mA	1	2			GULL WING			3.3 V	3.3	SMALL OUTLINE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	SEPARATE OUTPUT	3	3.465 V	1 mm		4 mm	Not Qualified			3.135 V				e4		30	260					4 mm
SN65LVCP408PAPR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	64	HTFQFP	SQUARE	YES	PLASTIC/EPOXY	440 mA	1	8			GULL WING			3.3 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	SEPARATE OUTPUT	3	3.465 V	1.2 mm		10 mm	Not Qualified			3.135 V				e4		30	260					10 mm
AD8109ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	8	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm		12 mm	Not Qualified		98 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns				12 mm
AD8114ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16			GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	5.5 V	1.6 mm		14 mm	Not Qualified		90 dB	4.5 V			-4.5 V	e3		30	260					14 mm
AD8180ARZ	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	4.75 mA	1	2	BIPOLAR		GULL WING	-6 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1	6 V	1.75 mm		3.9 mm	Not Qualified		89 dB	4 V			-4 V	e3		30	260	10 ns				4.9 mm
AD8182ARZ	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	8.5 mA	2	2	BIPOLAR		GULL WING	-6 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14		1	6 V	1.75 mm		3.9 mm	Not Qualified		93 dB	4 V			-4 V	e3		30	260	10 ns				8.65 mm
ADG221KNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT			4.32 mm		7.62 mm	Not Qualified	NC	80 dB					e3	BREAK-BEFORE-MAKE			300 ns	90 ohm	250 ns	5 ohm	19.055 mm
ADG512BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	MIL-STD-883	GULL WING	-5.5 V	-5 V	5 V	3.3/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO	68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	375 ns	50 ohm	150 ns		9.9 mm
ADG526AKPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	5 ohm	11.505 mm
ADG528AKNZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	18	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/+-15	IN-LINE	DIP18,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T18			16.5 V	4.57 mm	.02 A	7.62 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	5 ohm	21.97 mm
ADG713BRUZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	12 ns	.1 ohm	5 mm
ADG739BRUZ	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.1 mm		4.4 mm	Not Qualified		55 dB	2.7 V				e3		30	260	70 ns	11 ohm	25 ns	.4 ohm	5 mm
ADG739BRUZ-REEL	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm		4.4 mm	Not Qualified		75 dB	2.7 V				e3		30	260	70 ns	11 ohm	25 ns	.4 ohm	5 mm
DG301BDJ-E3	Vishay Intertechnology	SPDT	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1 mA	1	1	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T14	SEPARATE OUTPUT	1		5.08 mm		7.62 mm	Not Qualified	NO/NC	62 dB			-15 V		e3	BREAK-BEFORE-MAKE	30	260	150 ns	50 ohm	130 ns		18.285 mm	15 V
DG303BDJ-E3	Vishay Intertechnology	DPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1 mA	2	1	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T14	SEPARATE OUTPUT	1		5.08 mm		7.62 mm	Not Qualified	NO/NC	62 dB			-15 V		e3	BREAK-BEFORE-MAKE	30	260	150 ns	50 ohm	130 ns		18.285 mm	15 V
DG303BDY-E3	Vishay Intertechnology	DPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1 mA	2	1	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NO/NC	62 dB			-15 V		e3	BREAK-BEFORE-MAKE	30	260	150 ns	50 ohm	130 ns		8.65 mm	15 V
DG333ADJ-E3	Vishay Intertechnology	SPDT	INDUSTRIAL	20	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-22 V	-15 V	15 V	12/+-15	IN-LINE	DIP20,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T20	SEPARATE OUTPUT	1	22 V	5.08 mm		7.62 mm	Not Qualified		72 dB	4 V			-4 V	e3	BREAK-BEFORE-MAKE			175 ns	45 ohm	145 ns	2 ohm	25.905 mm
DG406BDN-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.5062 mm	Not Qualified		86 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	123 ns	60 ohm	94 ns	3 ohm	11.5062 mm
DG406DJ-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	16	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V	12/+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T28		1	20 V	5.08 mm	.02 A	15.24 mm	Not Qualified		69 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	100 ohm	300 ns	5 ohm	37.4 mm
DG408DQ-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G16		1	20 V	1.2 mm	.02 A	4.4 mm	Not Qualified		75 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	150 ns	15 ohm	5 mm
DG408LDY-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.7 mA	1	8	BICMOS		GULL WING	-6 V	-5 V	5 V	3/12/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	6 V	1.75 mm	.03 A	3.9 mm	Not Qualified		70 dB	3 V	VIDEO APPLICATION		-3 V	e3	BREAK-BEFORE-MAKE	30	260	60 ns	40 ohm	45 ns		9.9 mm
DG413DJ-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE		-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1		5.08 mm		7.62 mm	Not Qualified	NO/NC	68 dB					e3	BREAK-BEFORE-MAKE	30	260	220 ns	35 ohm	160 ns		20.13 mm
DG419LDY-E3	Vishay Intertechnology	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	BICMOS		GULL WING	-6 V	-5 V	5 V	+-3/+-6/3/12	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1	6 V	1.75 mm		3.9 mm	Not Qualified		71 dB	3 V	VIDEO APPLICATION		-3 V	e3	BREAK-BEFORE-MAKE			44 ns	18.5 ohm	33 ns		4.9 mm
DG444DY-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NC	60 dB					e3	BREAK-BEFORE-MAKE	30	260	250 ns	85 ohm	140 ns		9.9 mm
DG445DJ-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE		-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1		5.08 mm		7.62 mm	Not Qualified	NO	60 dB					e3	BREAK-BEFORE-MAKE	30	260	250 ns	85 ohm	210 ns		20.13 mm
DG613DY-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	NMOS		GULL WING	-10 V	-3 V	15 V	5,15,-3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	21 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	74 dB	5 V	VIDEO APPLICATION		0 V	e3	BREAK-BEFORE-MAKE	30	260	50 ns	45 ohm	35 ns	2 ohm	9.9 mm
DG884DN-E3	Vishay Intertechnology	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	NMOS		J BEND	-5.5 V	-3 V	15 V	5,15,-3	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J44		1	20 V	4.57 mm		16.5862 mm	Not Qualified			10 V	8 X 4 ARRAY		0 V	e3	BREAK-BEFORE-MAKE			300 ns	90 ohm	175 ns	3 ohm	16.5862 mm
DG9431DV-T1-E3	Vishay Intertechnology	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	12 V	1.1 mm		1.65 mm	Not Qualified		74 dB	2.7 V				e3	BREAK-BEFORE-MAKE	30	260	120 ns	50 ohm	50 ns	.4 ohm	3.05 mm
MAX4854HETE	Maxim Integrated	SPST	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD			3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	5.5 V	.8 mm		3 mm	Not Qualified	NO	80 dB	2 V				e0	BREAK-BEFORE-MAKE		245	60 ns	9 ohm	40 ns	.2 ohm	3 mm
ADG411BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	4.57 mm		7.62 mm	Not Qualified	NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE			175 ns	35 ohm	145 ns		19.43 mm
ADG936BRU-500RL7	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		36 dB	1.65 V				e0			240	14 ns		13 ns		6.5 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.