Analog Devices Multiplexers & Switches 736

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
ADG211AKRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NC	80 dB				e3	BREAK-BEFORE-MAKE	30	260	600 ns	115 ohm	450 ns		9.9 mm
ADG433BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	165 ns	24 ohm	130 ns	.85 ohm	9.9 mm
ADG452BRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	220 ns	12 ohm	140 ns	.3 ohm	9.9 mm
ADG701BRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE	40	260	20 ns	5 ohm	13 ns		2.9 mm
ADG774ABRQZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	2	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	3.3 V	1.7526 mm		3.9116 mm	Not Qualified		65 dB	2.7 V	ALSO OPERATES WITH 5V NOMINAL SUPPLY		e3	BREAK-BEFORE-MAKE		260	14 ns	6 ohm	8 ns	.15 ohm	4.9022 mm
ADG774ABRQZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	2	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	3.3 V	1.7526 mm		3.9116 mm	Not Qualified		65 dB	2.7 V	ALSO OPERATES WITH 5V NOMINAL SUPPLY		e3	BREAK-BEFORE-MAKE		260	14 ns	6 ohm	8 ns	.15 ohm	4.9022 mm
ADG781BCPZ	Analog Devices	SPST	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD			3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20		3	5.5 V	.9 mm		4 mm	Not Qualified	NC	58 dB	1.8 V	CAN ALSO OPERATE AT 5V NOMINAL		e3	BREAK-BEFORE-MAKE		260	20 ns	10 ohm	12 ns	.1 ohm	4 mm
ADG836LYRM-REEL7	Analog Devices	SPDT	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	3.6 V	1.1 mm		3 mm	Not Qualified	NC	67 dB	1.65 V			e0	BREAK-BEFORE-MAKE	30	240	26 ns	.65 ohm	7 ns	.04 ohm	3 mm
ADG836LYRM-REEL	Analog Devices	SPDT	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	3.6 V	1.1 mm		3 mm	Not Qualified	NC	67 dB	1.65 V			e0	BREAK-BEFORE-MAKE		240	26 ns	.65 ohm	7 ns	.04 ohm	3 mm
ADG836LYRM	Analog Devices	SPDT	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	3.6 V	1.1 mm		3 mm	Not Qualified	NC	67 dB	1.65 V			e0	BREAK-BEFORE-MAKE		240	26 ns	.65 ohm	7 ns	.04 ohm	3 mm
ADG412BRU-REEL7	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE	30	240	175 ns	35 ohm	145 ns		5 mm
ADG412BRU-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE	30	240	175 ns	35 ohm	145 ns		5 mm
ADG412BRUZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	145 ns		5 mm
ADG412BRUZ	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	145 ns		5 mm
ADG701BRJ-500RL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns		2.9 mm
ADG701BRJ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns		2.9 mm
ADG701BRJ-REEL	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5			5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE			20 ns	5 ohm	13 ns		2.9 mm
ADG702BRJ-500RL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns		2.9 mm
ADG702BRJ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns		2.9 mm
ADG702BRJ-REEL	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5			5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE			20 ns	5 ohm	13 ns		2.9 mm
ADG904BRU-R-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		37 dB	1.65 V			e0			240	10 ns		16 ns		6.5 mm
ADG904BRU-R-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		37 dB	1.65 V			e0			240	10 ns		16 ns		6.5 mm
ADG904BRU-R	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20			2.75 V	1.2 mm		4.4 mm	Not Qualified		37 dB	1.65 V			e0				10 ns		16 ns		6.5 mm
AD8108ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	8	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm		12 mm	Not Qualified		93 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns				12 mm
AD8110ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm		12 mm	Not Qualified		93 dB	4.5 V		-4.5 V	e3		30	260					12 mm
AD8152JBPZ	Analog Devices	CROSS POINT SWITCH	OTHER	256	LBGA	SQUARE	YES	PLASTIC/EPOXY		1	34			BALL			2.5 V		GRID ARRAY, LOW PROFILE			1.27 mm	85 Cel	0 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B256		3	3.63 V	1.7 mm		27 mm	Not Qualified			2.25 V			e1		30	260		57 ohm			27 mm
ADG406BNZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	16	BICMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T28			16.5 V	6.35 mm	.02 A	15.24 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE			150 ns	80 ohm	150 ns	4 ohm	37.4 mm
ADG419BNZ	Analog Devices	SPDT	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T8			16.5 V	5.33 mm		7.62 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE			160 ns	35 ohm	160 ns		9.88 mm
ADG431BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT		16.5 V	5.33 mm		7.62 mm	Not Qualified	NC	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE			165 ns	24 ohm	130 ns	.85 ohm	20.13 mm
ADG431BRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	13.5 V	CAN ALSO OPERATE WITH 12V SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	165 ns	24 ohm	130 ns	.85 ohm	9.9 mm
ADG436BNZ	Analog Devices	SPDT	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS		THROUGH-HOLE		-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16				5.33 mm		7.62 mm	Not Qualified		72 dB				e3	BREAK-BEFORE-MAKE			125 ns	25 ohm	120 ns	1 ohm	20.07 mm
ADG453BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	220 ns	12 ohm	140 ns	.3 ohm	9.9 mm
ADG507AKPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.51 mm	.02 A	11.506 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	22.5 ohm	11.5062 mm
ADG507AKRZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e3	BREAK-BEFORE-MAKE	40	260	300 ns	450 ohm	300 ns	22.5 ohm	17.9 mm
ADG507AKRZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	14 ohm	17.9 mm
ADG508FBRNZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION	-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	390 ohm	150 ns	8.1 ohm	9.9 mm
ADG511BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	MIL-STD-883	GULL WING	-5.5 V	-5 V	5 V	3.3/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	375 ns	50 ohm	150 ns		9.9 mm
ADG511BRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3.3/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	375 ns	50 ohm	150 ns		9.9 mm
ADG513BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	MIL-STD-883	GULL WING	-5.5 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	68 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	375 ns	50 ohm	150 ns		9.9 mm
ADG513BRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	68 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	375 ns	50 ohm	150 ns		9.9 mm
ADG604YRUZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14		1	5.5 V	1.2 mm	.02 A	4.4 mm	Not Qualified		75 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE		260	105 ns	115 ohm	45 ns	2 ohm	5 mm
ADG609BRUZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm	.02 A	4.4 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	75 ns	30 ohm	75 ns	2 ohm	5 mm
ADG609BRZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	1	4	BICMOS		GULL WING	-5.5 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	75 ns	30 ohm	75 ns	2 ohm	9.9 mm
ADG611YRUZ-REEL	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.01 A	4.4 mm	Not Qualified	NC	65 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	260 ns	115 ohm	65 ns	2 ohm	5 mm
ADG613YRUZ	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.01 A	4.4 mm	Not Qualified	NO/NC	65 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	260 ns	115 ohm	65 ns	2 ohm	5 mm
ADG613YRUZ-REEL	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.01 A	4.4 mm	Not Qualified	NO/NC	65 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	260 ns	115 ohm	65 ns	2 ohm	5 mm
ADG623BRMZ	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG702BRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2.9 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.