Analog Devices Multiplexers & Switches 736

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
ADG721BRM-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY		e0	BREAK-BEFORE-MAKE		240	24 ns	10 ohm	11 ns	.3 ohm	3 mm
SW06GS-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	BIMOS	GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		2.65 mm		7.5 mm	Not Qualified		58 dB				e0			240	700 ns	150 ohm	500 ns	10 ohm	10.3 mm
ADG734BRU	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	2.75 V	1.2 mm		4.4 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY	-2.25 V	e0	BREAK-BEFORE-MAKE		240	35 ns	4.5 ohm	16 ns	.1 ohm	6.5 mm
ADG774ABRQ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	2	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	3.3 V	1.7526 mm		3.9116 mm	Not Qualified		65 dB	2.7 V	ALSO OPERATES WITH 5V NOMINAL SUPPLY		e0	BREAK-BEFORE-MAKE		240	14 ns	6 ohm	8 ns	.15 ohm	4.9022 mm
ADG201AKR-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NC	80 dB				e0	BREAK-BEFORE-MAKE		240	300 ns	90 ohm	250 ns	5 ohm	9.9 mm
ADG1409YRUZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS	GULL WING	-5.5 V	-5 V	5 V	+-15/+12/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm	.03 A	4.4 mm	Not Qualified		70 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	330 ns	9 ohm	285 ns	.78 ohm	5 mm
ADG1236YRUZ-REEL	Analog Devices	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified		80 dB	13.5 V		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	190 ohm		3.5 ohm	5 mm
ADG1233YCPZ-REEL	Analog Devices	SPDT	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	3	CMOS	NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	16.5 V	1 mm		4 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE		260	140 ns	190 ohm	45 ns	3.5 ohm	4 mm
ADG1233YRUZ	Analog Devices	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	3	CMOS	GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	140 ns	190 ohm	45 ns	3.5 ohm	5 mm
ADG1234YCPZ-REEL	Analog Devices	SPDT	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	UNSPECIFIED		1	4	CMOS	NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20	SEPARATE OUTPUT	3	16.5 V	1 mm		4 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE		260	140 ns	190 ohm	45 ns	3.5 ohm	4 mm
ADG1209YCPZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.33 mA	1	4	CMOS	NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	16.5 V	1 mm	.03 A	4 mm	Not Qualified		85 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE		260	115 ns	200 ohm	140 ns	3.5 ohm	4 mm
ADG791ABCPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	24	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	4	2	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24		3	3.3 V	1 mm		4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATES WITH 5V NOMINAL SUPPLY		e3	BREAK-BEFORE-MAKE		260	270 ns	6 ohm	260 ns	.15 ohm	4 mm
ADG795ABCPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	24	HVQCCN	SQUARE	YES	UNSPECIFIED	.7 mA	5	2	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24		3	3.3 V	1 mm		4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATES WITH 5V NOMINAL SUPPLY		e3	BREAK-BEFORE-MAKE		260	270 ns	6 ohm	260 ns	.15 ohm	4 mm
ADG1308BRUZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS	GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.2 mm	.03 A	4.4 mm	Not Qualified		80 dB	13.5 V		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	210 ohm	150 ns	5 ohm	5 mm
ADG1308BRZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS	GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.03 A	3.9 mm	Not Qualified		80 dB	13.5 V		-13.5 V	e3	BREAK-BEFORE-MAKE		260	120 ns	210 ohm	150 ns	5 ohm	9.9 mm
ADG1309BRUZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	4	CMOS	GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.2 mm	.03 A	4.4 mm	Not Qualified		80 dB	13.5 V		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	210 ohm	150 ns	5 ohm	5 mm
ADG1312YRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified		80 dB	13.5 V		-13.5 V	e3	BREAK-BEFORE-MAKE		260	180 ns	200 ohm	60 ns	5 ohm	9.9 mm
ADG1313YRZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified		80 dB	13.5 V		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns	200 ohm	60 ns	5 ohm	9.9 mm
ADG1313YRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified		80 dB	13.5 V		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns	200 ohm	60 ns	5 ohm	9.9 mm
AD8117ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY		1	32	BIPOLAR	BALL		-2.5 V	2.5 V	+-2.5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm		31 mm	Not Qualified		90 dB		CAN ALSO OPERATE WITH 5V SINGLE SUPPLY		e1			260					31 mm
AD8118ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY		1	32	BIPOLAR	BALL		-2.5 V	2.5 V	+-2.5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm		31 mm	Not Qualified		90 dB		CAN ALSO OPERATE WITH 5V SINGLE SUPPLY		e1			260					31 mm
ADG701LBRJ-500RL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRJ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRJ-REEL	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRJZ-REEL	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRM-REEL7	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG701LBRM-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG701LBRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG701LBRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG701LBRM	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG701LBRT-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRJ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRJZ-500RL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRJZ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRM-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG702LBRMZ-REEL7	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG702LBRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG702LBRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG702LBRT-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG799ABCPZ-REEL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED		1	3	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT	3	3.3 V	1 mm		4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY		e3	BREAK-BEFORE-MAKE		260	266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
ADG799GBCPZ-REEL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED		1	3	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT	3	3.3 V	1 mm		4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY		e3	BREAK-BEFORE-MAKE		260	266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
ADG620BRTZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.45 mm	.05 A	1.6 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e4	MAKE-BEFORE-BREAK		260	65 ns	6.5 ohm	330 ns	.7 ohm	2.9 mm
ADG722ACPZ-REEL7	Analog Devices	SPST	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS	NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-N8	SEPARATE OUTPUT	1	5.5 V	.8 mm		2 mm	Not Qualified	NC	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY		e3	BREAK-BEFORE-MAKE		260	24 ns	10 ohm	11 ns	.3 ohm	3 mm
ADG723ACPZ-REEL	Analog Devices	SPST	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS	NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-N8	SEPARATE OUTPUT	1	5.5 V	.8 mm		2 mm	Not Qualified	NO/NC	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY		e3	BREAK-BEFORE-MAKE		260	24 ns	10 ohm	11 ns	.3 ohm	3 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.