Analog Devices Multiplexers & Switches 736

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
ADG507AKP	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS	J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.51 mm	.02 A	11.506 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	22.5 ohm	11.5062 mm
ADG774BRQ	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	2	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	3.3 V	1.7526 mm	.1 A	3.9116 mm	Not Qualified		65 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY		e0	BREAK-BEFORE-MAKE		240	21 ns	9 ohm	11 ns	.15 ohm	4.9022 mm
ADG719BRM	Analog Devices	SPDT	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified		67 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	15 ns	12 ohm	8 ns	.1 ohm	3 mm
ADG441BN	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE	-16.5 V	-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT		16.5 V	4.57 mm		7.62 mm	Not Qualified	NC	60 dB	13.5 V	CAN ALSO OPERATE WITH 12V SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE			110 ns	70 ohm	60 ns	1 ohm	19.43 mm
ADG452BN	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE	-20 V	-5 V	5 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT		20 V	5.33 mm		7.62 mm	Not Qualified	NO	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-4.5 V	e0	BREAK-BEFORE-MAKE			220 ns	12 ohm	140 ns	.3 ohm	20.07 mm
ADG441BR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	60 dB	13.5 V	CAN ALSO OPERATE WITH 12V SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	110 ns	70 ohm	60 ns	1 ohm	9.9 mm
ADG451BR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NC	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-4.5 V	e0	BREAK-BEFORE-MAKE		240	220 ns	12 ohm	140 ns	.3 ohm	9.9 mm
ADG452BR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-4.5 V	e0	BREAK-BEFORE-MAKE		240	220 ns	12 ohm	140 ns	.3 ohm	9.9 mm
ADG453BR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-4.5 V	e0	BREAK-BEFORE-MAKE		240	220 ns	12 ohm	140 ns	.3 ohm	9.9 mm
ADG702BRM	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns		3 mm
ADG409BN	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	2 mA	1	4	CMOS	THROUGH-HOLE		-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16				5.33 mm	.02 A	7.62 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY		e0	BREAK-BEFORE-MAKE			150 ns	100 ohm	150 ns	15 ohm	20.07 mm
ADG409BR	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	4	CMOS	GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY		e0	BREAK-BEFORE-MAKE		240	150 ns	100 ohm	150 ns	15 ohm	9.9 mm
ADG509FBRN	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	2	4	CMOS	GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION	-13.5 V	e0	BREAK-BEFORE-MAKE	30	240	300 ns	390 ohm	150 ns	8.1 ohm	9.9 mm
ADG408BN	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	2 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16				5.33 mm	.02 A	7.62 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY		e0	BREAK-BEFORE-MAKE			150 ns	100 ohm	150 ns	15 ohm	20.07 mm
ADG408BR	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS	GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY		e0	BREAK-BEFORE-MAKE		240	150 ns	100 ohm	150 ns	15 ohm	9.9 mm
ADG408BRU	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.2 mm	.02 A	4.4 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY		e0	BREAK-BEFORE-MAKE		240	150 ns	100 ohm	150 ns	15 ohm	5 mm
ADG508FBRN	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	8	CMOS	GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION	-13.5 V	e0	BREAK-BEFORE-MAKE	30	240	300 ns	390 ohm	150 ns	8.1 ohm	9.9 mm
ADG528FBP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.2 mA	1	8	CMOS	J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION	-13.5 V	e0	BREAK-BEFORE-MAKE		225	400 ns	400 ohm	400 ns	15 ohm	8.965 mm
ADG419TQ	Analog Devices	SPDT	MILITARY	8	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	1	CMOS	THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T8			16.5 V	5.08 mm		7.62 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE			145 ns	35 ohm	145 ns
ADG419BN	Analog Devices	SPDT	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	CMOS	THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8			16.5 V	5.33 mm		7.62 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE			160 ns	35 ohm	160 ns		9.88 mm
ADG419BRM	Analog Devices	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	TSSOP8,.19	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	16.5 V	1.75 mm		3.9 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	160 ns		4.9 mm
ADG419BR	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP8,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	16.5 V	1.09 mm		3 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	160 ns		3 mm
ADG411BN	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT		16.5 V	4.57 mm		7.62 mm	Not Qualified	NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE			175 ns	35 ohm	145 ns		19.43 mm
ADG431BN	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT		16.5 V	5.33 mm		7.62 mm	Not Qualified	NC	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE			165 ns	24 ohm	130 ns	.85 ohm	20.13 mm
ADG433BN	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT		16.5 V	5.33 mm		7.62 mm	Not Qualified	NO/NC	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE			165 ns	24 ohm	130 ns	.85 ohm	20.13 mm
ADG221KR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NC	80 dB				e0	BREAK-BEFORE-MAKE		240	300 ns	90 ohm	250 ns	5 ohm	9.9 mm
ADG411BR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	175 ns	35 ohm	145 ns		9.9 mm
ADG411BRU	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	175 ns	35 ohm	145 ns		5 mm
ADG412BR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	175 ns	35 ohm	145 ns		9.9 mm
ADG413BR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	175 ns	35 ohm	145 ns		9.9 mm
ADG431BR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	165 ns	24 ohm	130 ns	.85 ohm	9.9 mm
ADG432BR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	165 ns	24 ohm	130 ns	.85 ohm	9.9 mm
ADG433BR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	165 ns	24 ohm	130 ns	.85 ohm	9.9 mm
ADG417BR	Analog Devices	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	16.5 V	5.33 mm		3.9 mm	Not Qualified	NC	80 dB	13.5 V		-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	100 ns		4.9 mm
ADG439FBR	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS	GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		93 dB		FAULT PROTECTED; OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE		240	345 ns	270 ohm	173 ns	8.1 ohm	9.9 mm
ADG438FBR	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		93 dB		FAULT PROTECTED; OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE		240	345 ns	270 ohm	173 ns	8.1 ohm	9.9 mm
ADG723BRM	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY		e0	BREAK-BEFORE-MAKE		240	24 ns	10 ohm	11 ns	.3 ohm	3 mm
ADG711BRU	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY		e0	BREAK-BEFORE-MAKE	30	240	20 ns	8 ohm	12 ns	.1 ohm	5 mm
ADG411BR-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE	30	240	175 ns	35 ohm	145 ns		9.9 mm
ADG201AKR-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NC	80 dB				e0	BREAK-BEFORE-MAKE		240	300 ns	90 ohm	250 ns	5 ohm	9.9 mm
ADG333ABR-REEL	Analog Devices	SPDT	INDUSTRIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.35 mA	4	1	BICMOS	GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1		2.65 mm		7.5 mm	Not Qualified		72 dB				e0	BREAK-BEFORE-MAKE		240	175 ns	45 ohm	145 ns	4 ohm	12.8 mm
ADG333ABRS-REEL	Analog Devices	SPDT	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.35 mA	4	1	BICMOS	GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1		2 mm		5.3 mm	Not Qualified		72 dB				e0	BREAK-BEFORE-MAKE		240	175 ns	45 ohm	145 ns	4 ohm	7.2 mm
ADG406BP-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS	J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		225	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
ADG407BP-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	BICMOS	J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		225	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
ADG408BR-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS	GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY		e0	BREAK-BEFORE-MAKE		240	150 ns	100 ohm	150 ns	15 ohm	9.9 mm
ADG408BRU-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.2 mm	.02 A	4.4 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY		e0	BREAK-BEFORE-MAKE		240	150 ns	100 ohm	150 ns	15 ohm	5 mm
ADG409BR-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	4	CMOS	GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY		e0	BREAK-BEFORE-MAKE		240	150 ns	100 ohm	150 ns	15 ohm	9.9 mm
ADG412BR-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	175 ns	35 ohm	145 ns		9.9 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.