INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Terminal Form	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Control Mode	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Maximum Input Voltage
MAX1926ETC	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	12	HVQCCN	SQUARE	YES	235 kHz	UNSPECIFIED		.1 A	1	1	BICMOS	NO LEAD		5 V	4	SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.16SQ,32	Power Management Circuits	.8 mm	85 Cel	CURRENT/VOLTAGE-MODE	-40 Cel	TIN LEAD	QUAD	S-XQCC-N12	1	12 V	.8 mm	4 mm	Not Qualified	4.25 V	5 V		4.5 V	e0			+4V	4 mm	YES	12 V
MAX5919AEEE	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	2.3 mA		1	2	BICMOS	GULL WING		3.3 V	3.3,5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Power Management Circuits	.635 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	13.2 V	1.75 mm	3.9 mm	Not Qualified	1 V				e0		245		4.9 mm	YES
TPS2393PWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	3 mA	500 A	1	1		GULL WING	-48 V		-48		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	-20 V	1.2 mm	4.4 mm	Not Qualified	-80 V		-20 V TO -80 V WIDE INPUT SUPPLY RANGE		e4	30	260	+1.35V	5 mm	YES
TPS2211APWPR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		3.3 V	3.3/5,12		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	2	13.5 V	1.2 mm	4.4 mm	Not Qualified	3 V		ALSO OPERATE ON 5V SUPPLY		e4	30	260		6.5 mm	NO
TPS2114PWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.09 mA		1	2		GULL WING		2.8 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G8		5.5 V	1.2 mm	3 mm	Not Qualified	1.5 V		CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS			NOT SPECIFIED	NOT SPECIFIED		4.4 mm	YES
MAX6444US16L-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	LSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.02 mA		1	1	BICMOS	GULL WING		3.6 V	1/5.5		SMALL OUTLINE, LOW PROFILE	TO-253	Power Management Circuits	1.92 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G4	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1 V		RESET THRESHOLD VOLTAGE IS 1.575V		e0		245	+1.58V	2.92 mm	YES
MAX6444US31L-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	LSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.02 mA		1	1	BICMOS	GULL WING		3.6 V	1/5.5		SMALL OUTLINE, LOW PROFILE	TO-253	Power Management Circuits	1.92 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G4	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1 V		RESET THRESHOLD VOLTAGE IS 3.075V		e0			+3.08V	2.92 mm	YES
MAX6455UT46S-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.02 mA		1	1	BICMOS	GULL WING		3.3 V	1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	1 V		RESET THRESHOLD VOLTAGE IS 4.63V; MANUAL RESET INPUT		e0			+4.63V	2.9 mm	YES
MAX6456UT16S-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.02 mA		1	1	BICMOS	GULL WING		3.3 V	1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	1 V		RESET THRESHOLD VOLTAGE IS 1.58V; MANUAL RESET INPUT		e0			+1.58V	2.9 mm	YES
MAX6732UTVDD3-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	2	BICMOS	GULL WING			1/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	.8 V				e0				2.9 mm	NO
MAX6734KAYDD3-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	3	BICMOS	GULL WING			1/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	.8 V				e0				2.9 mm	YES
MAX6735KARVD3-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	3	BICMOS	GULL WING			1/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	.8 V				e4				2.9 mm	YES
MAX6736XKZWD3-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		1.8 V	1.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V		VCC1 & VCC2 RESET THRESHOLD IS 2.313V & 1.665V		e0		245	+1.67,2.31V	2 mm	YES
MAX6739XKRD3-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		1.8 V	1.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V		RESET THRESHOLD VOLTAGE IS 2.625V; MANUAL RESET INPUT		e0			+2.63V	2 mm	YES
MAX6740XKVFD3-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	3	BICMOS	GULL WING		1.8 V	1.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1 V		VCC1 & VCC2 RESET THRESHOLD IS 1.575V & 1.050V AND ADJUSTABLE THRESHOLD IS DOWN TO 0.5V		e0		245	+1.05,1.58V	2 mm	YES
MAX6741XKLTD3-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		1.8 V	1.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V		VCC1 & VCC2 RESET THRESHOLD IS 4.625V & 3.075V		e0			+3.08,4.63V	2 mm	YES
MAX6743XKTGD3-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		1.8 V	1.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V		VCC1 & VCC2 RESET THRESHOLD IS 3.075V & 1.110V AND ADJUSTABLE THRESHOLD IS DOWN TO 0.5V		e0			+1.11,3.08V	2 mm	YES
MAX6842GUKD4-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.02 mA		1	1	BICMOS	GULL WING		.9 V	.75/1.8		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	1	1.8 V	1.45 mm	1.625 mm	Not Qualified	.75 V				e0			+1.110V	2.9 mm	NO
MAX809HTR	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0025 mA		1	1	CMOS	GULL WING		3.3 V	1/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	105 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G3		5.5 V	1.11 mm	1.3 mm	Not Qualified	1.2 V		RESET THRESHOLD VOLTAGE IS 4.55V		e0		235	+4.55V	2.9 mm	NO
ADM1060ARU-REEL7	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	7		GULL WING			3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	6 V	1.2 mm	4.4 mm	Not Qualified	2 V				e0		240		9.7 mm	YES
ADM1232ARW-REEL	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.5 mA		1	1	CMOS	GULL WING		5 V	5		SMALL OUTLINE	SOP16,.4	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		5.5 V	2.65 mm	7.5 mm	Not Qualified	4.5 V				e0			+4.37/4.62V	10.3 mm	NO
AP2331FJ-7	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	SON	SQUARE	YES		PLASTIC/EPOXY			1	1		NO LEAD		5 V			SMALL OUTLINE	SOLCC3(UNSPEC)			85 Cel		-40 Cel		DUAL	S-PDSO-N3		5.2 V	.63 mm	2 mm		2.7 V						260		2 mm	NO
BQ27532YZFT-G1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	15	VFBGA	RECTANGULAR	YES		UNSPECIFIED			1	1		BALL		3.6 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel		-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B15	1	4.5 V	.625 mm	1.956 mm		2.8 V				e1	30	260		2.61 mm	NO
HPA00615DRVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY			1	1		NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N6	1	6.5 V	.8 mm	2 mm		2.5 V				e4	30	260		2 mm	YES
HPA00714DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1		GULL WING		5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	1	6.5 V	1.45 mm	1.6 mm		2.5 V				e4	NOT SPECIFIED	260		2.9 mm	YES
HPA00744PWR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1		GULL WING		2.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.6 V	1.2 mm	4.4 mm		2.4 V				e4	30	260		6.5 mm	NO
HPA01197RGER	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1		NO LEAD				BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N24	2	17 V	1 mm	4 mm		3.9 V		DETECTION THRESHOLD VOLTAGE IS 3.8V		e4	NOT SPECIFIED	260	+3.8V	4 mm	YES
HPA01217DRZR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	12	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1		NO LEAD		3.6 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-N12	2	5.5 V	1 mm	2.5 mm		2.7 V				e4	NOT SPECIFIED	260		4 mm	NO
HPA02135DBTR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1		GULL WING		14 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	25 V	1.2 mm	4.4 mm		4.5 V				e4	30	260		9.7 mm	NO
HPA02148DRZR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	12	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1		NO LEAD		3.6 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-N12	2	5.5 V	1 mm	2.5 mm		2.7 V				e4	30	260		4 mm	NO
HPA02150RGER	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1		NO LEAD				BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N24	2	17 V	1 mm	4 mm		3.9 V		DETECTION THRESHOLD VOLTAGE IS 3.8V		e4	NOT SPECIFIED	260	+3.8V	4 mm	NO
HPA02254YZFR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	15	VFBGA	RECTANGULAR	YES		UNSPECIFIED			1	1		BALL		3.6 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel		-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-XBGA-B15	1	4.5 V	.625 mm	1.956 mm		2.8 V		ALSO OPERATES WITH SUPPLY VOLTAGE 2.45 TO 2.8V		e1	NOT SPECIFIED	260		2.61 mm	NO
NCP392ARFCCT1G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES		PLASTIC/EPOXY	.2 mA		1	1		BALL		5 V	5		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA12,3X4,16	Power Management Circuits	.4 mm	85 Cel		-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-PBGA-B12		28 V	.6 mm	1.285 mm	Not Qualified	2.8 V				e1				2.025 mm	YES
ADM811ZART-REEL	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	LSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.01 mA		1	1	CMOS	GULL WING		2.5 V	2.5		SMALL OUTLINE, LOW PROFILE	TO-253LOW	Power Management Circuits	1.92 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G4	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1 V		RESET THRESHOLD VOLTAGE IS 2.32V; BUILT-IN MANUAL RESET		e0		240	+2.32V	2.9 mm	NO
MAX1773EUP	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	3	BICMOS	GULL WING		28 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	28 V	1.1 mm	4.4 mm	Not Qualified	4.75 V		IT CAN ALSO OPERATE FROM 4.75V 19V BATTERY SUPPLY		e0		245		6.5 mm	NO
MAX8536EUA	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	2	BICMOS	GULL WING		5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	3 V				e0				3 mm	YES
ADM707AR-REEL	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.25 mA		1	1		GULL WING		5 V	5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1 V		RESET THRESHOLD VOLTAGE IS 4.65V; MANUAL RESET INPUT		e0	30	240	+4.65V	4.9 mm	NO
ADM708TAR-REEL	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.35 mA		1	1		GULL WING			3.3/5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	3.15 V		MANUAL RESET OPTION		e0		240	+3.08V	4.9 mm	NO
ADM8690ARN-REEL	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.2 mA		1	2	CMOS	GULL WING		5 V	5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	4.75 V		RESET THRESHOLD VOLTAGE IS 4.65V		e0		240	+4.65V	4.9 mm	NO
MAX6338AUB-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.065 mA		1	4	BICMOS	GULL WING		3 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	S-PDSO-G10	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.5 V				e0				3 mm	YES
MAX6338DUB-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.065 mA		1	4	BICMOS	GULL WING		3 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Tin/Lead (Sn/Pb)	DUAL	S-PDSO-G10	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.5 V				e0	20	240		3 mm	YES
TPS3511P	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	1 mA		1	3		THROUGH-HOLE		5 V	4/15		IN-LINE	DIP8,.3	Power Management Circuits	2.54 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		15 V	5.08 mm	7.62 mm	Not Qualified	4 V				e4				9.81 mm	NO
TPS2211AIDB	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		3.3 V	3.3/5,12		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	13.5 V	2 mm	5.3 mm	Not Qualified	3 V		ALSO OPERATE ON 5V SUPPLY		e4	30	260		6.2 mm	NO
TPS2211APWP	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		3.3 V	3.3/5,12		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	2	13.5 V	1.2 mm	4.4 mm	Not Qualified	3 V		ALSO OPERATE ON 5V SUPPLY		e4	30	260		6.5 mm	NO
TPS3513D	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA		1	3		GULL WING		5 V	4.5/15		SMALL OUTLINE	SOP14,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	15 V	1.75 mm	3.9 mm	Not Qualified	4.5 V		UNDERVOLTAGE PROTECTION AND LOCKOUT FOR 12 V, AND UNDERVOLTAGE DETECT FOR 5 V AND 3.3 V		e4	NOT SPECIFIED	260	2.2	8.65 mm	NO
TPS3600D25PW	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.04 mA		1	1		GULL WING		2.5 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	1.65 V		RESET THRESHOLD VOLTAGE IS 2.22V; MANUAL RESET, POWER-ON RESET GENERATOR		e4	30	260	+2.22V	5 mm	NO
TPS3610T50PW	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.04 mA		1	2		GULL WING		5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	1.65 V		RESET THRESHOLD VOLTAGE IS 2.4V		e4	30	260	+2.4V	5 mm	YES
ADM1816-R22ART-RL7	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	CMOS	GULL WING		5 V	1.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	105 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	1.2 V		RESET THRESHOLD VOLTAGE IS 2.18V		e0		240	+2.18V	2.9 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.