INDUSTRIAL Switching Regulators & Controllers 2,228

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
PT6522LT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	14		RECTANGULAR	YES	400 kHz	UNSPECIFIED		8 A	1		HYBRID	GULL WING				SINGLE	MICROELECTRONIC ASSEMBLY				85 Cel			-40 Cel			SINGLE	R-XSMA-G14	1				Not Qualified		3.3 V		3.1 V							5.5 V
TPS61107RGER	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	24	HVQCCN	SQUARE	YES	800 kHz	PLASTIC/EPOXY		1.8 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.3 V	QUAD	S-PQCC-N24	2		1 mm	4 mm	Not Qualified		1.8 V		.8 V	e4	NOT SPECIFIED	2	260	4 mm	3.3 V	3.3 V
UCC2806DTR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		.5 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	5.02 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.17 V	DUAL	R-PDSO-G16	2	14.5 V	1.75 mm	3.9 mm	Not Qualified	8 V	12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 15V	8 V	e4	NOT SPECIFIED		260	9.9 mm		14.5 V
NCV33163DWR2	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	16	SOP	RECTANGULAR	YES	55 kHz	PLASTIC/EPOXY		2.5 A	1		BIPOLAR	GULL WING				BUCK-BOOST	SMALL OUTLINE	SOP16,.4	Switching Regulator or Controllers	1.27 mm	115 Cel		VOLTAGE-MODE	-40 Cel	Tin/Lead (Sn/Pb)		DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified		15 V		2.5 V	e0	30		235	10.3 mm		60 V
NCV33163P	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	16	DIP	RECTANGULAR	NO	55 kHz	PLASTIC/EPOXY		2.5 A	1		BIPOLAR	THROUGH-HOLE				BUCK-BOOST	IN-LINE	DIP16,.3	Switching Regulator or Controllers	2.54 mm	115 Cel		VOLTAGE-MODE	-40 Cel	Tin/Lead (Sn/Pb)		DUAL	R-PDIP-T16			4.69 mm	7.62 mm	Not Qualified		15 V		2.5 V	e0	NOT SPECIFIED		NOT SPECIFIED	19.4 mm		60 V
BQ24640RVAT	Texas Instruments	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	690 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N16	2	28 V	1 mm	3.5 mm	Not Qualified	5 V	20 V		5 V	e4	NOT SPECIFIED		260	3.5 mm	6 V	28 V
TPS62672YFDR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	6600 kHz	PLASTIC/EPOXY		.5 A	1			BALL	PULSE WIDTH MODULATION			BUCK	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	1.5 V	VOLTAGE-MODE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	1.5 V	BOTTOM	R-PBGA-B6	1		.4 mm	1.1 mm	Not Qualified		3.6 V	PFM CONTROL TECHNIQUE IS ALSO POSSIBLE	2.3 V	e1	30	1	260	1.5 mm	1.5 V	4.8 V
TPS62672YFDT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	6600 kHz	PLASTIC/EPOXY		.5 A	1			BALL	PULSE WIDTH MODULATION			BUCK	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	1.5 V	VOLTAGE-MODE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	1.5 V	BOTTOM	R-PBGA-B6	1		.4 mm	1.1 mm	Not Qualified		3.6 V	PFM CONTROL TECHNIQUE IS ALSO POSSIBLE	2.3 V	e1	30	1	260	1.5 mm	1.5 V	4.8 V
AP8801M8G-13	Diodes Incorporated	SWITCHING REGULATOR	INDUSTRIAL	8	TSSOP	SQUARE	YES	500 kHz	PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	105 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-G8	1		1.1 mm	3 mm	Not Qualified		24 V		8 V	e3	30		260	3 mm		48 V
AP8802SG-13	Diodes Incorporated	SWITCHING REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY		1 A	1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	105 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified		12 V		8 V	e3	30		260	4.9 mm		48 V
TPS51125RGETG4	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	24	HVQCCN	SQUARE	YES	460 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER			.5 mm	85 Cel	2 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N24	2		1 mm	4 mm	Not Qualified		12 V	ALSO OPERATES AS LDO REGULATOR	5.5 V	e4	NOT SPECIFIED	2	260	4 mm	3.3 V	28 V
PT6472N	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	12		RECTANGULAR	NO	300 kHz	METAL		14 A	1		HYBRID	THROUGH-HOLE				BUCK	MICROELECTRONIC ASSEMBLY	SIP12	Switching Regulator or Controllers		85 Cel		VOLTAGE-MODE	-40 Cel			SINGLE	R-MSMA-T12					Not Qualified		3.3 V		2.95 V		NOT SPECIFIED		NOT SPECIFIED			3.65 V
PT6475C	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	12		RECTANGULAR	YES	300 kHz	METAL		14 A	1		HYBRID	GULL WING				BUCK	MICROELECTRONIC ASSEMBLY	SMSIP12H,.7	Switching Regulator or Controllers	2.54 mm	85 Cel		VOLTAGE-MODE	-40 Cel			SINGLE	R-MSMA-G12					Not Qualified		3.3 V		2.95 V		NOT SPECIFIED		NOT SPECIFIED			3.65 V
PT6476N	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	12		RECTANGULAR	NO	300 kHz	METAL		14 A	1		HYBRID	THROUGH-HOLE				BUCK	MICROELECTRONIC ASSEMBLY	SIP12	Switching Regulator or Controllers		85 Cel		VOLTAGE-MODE	-40 Cel			SINGLE	R-MSMA-T12					Not Qualified		3.3 V		2.95 V		NOT SPECIFIED		NOT SPECIFIED			3.65 V
TPS40004DGQR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	10	HTSSOP	SQUARE	YES	350 kHz	PLASTIC/EPOXY		.1 A	1		CMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified		5 V		2.25 V	e4	30		260	3 mm		5.5 V
TPS54974PWPR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	28	HTSSOP	RECTANGULAR	YES	762 kHz	PLASTIC/EPOXY		16 A	1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Switching Regulator or Controllers	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel			DUAL	R-PDSO-G28			1.2 mm	4.4 mm	Not Qualified		2.5 V	ALSO REQUIRES 3V TO 4V SUPPLY	2.2 V		NOT SPECIFIED		NOT SPECIFIED	9.7 mm		4 V
TPS61030RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		2.4 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	1.8 V	e4	30	1	260	4 mm		5.5 V
TPS61031RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		2.4 V		1.8 V	e4	30	1	260	4 mm	3.3 V	5.5 V
TPS61121RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	600 kHz	PLASTIC/EPOXY		1.6 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel			QUAD	S-PQCC-N16			1 mm	4 mm	Not Qualified		3.3 V		1.8 V		NOT SPECIFIED		NOT SPECIFIED	4 mm		5.5 V
MAX1543ETP	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	20	VQCCN	SQUARE	YES	1400 kHz	PLASTIC/EPOXY		1.8 A	1		BICMOS	NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, VERY THIN PROFILE	LCC20,.20SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		QUAD	S-PQCC-N20	1		.8 mm	5 mm	Not Qualified		3 V		2.6 V	e0			245	5 mm		5.5 V
MAX1961EEP	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	1120 kHz	PLASTIC/EPOXY			1		BICMOS	GULL WING	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25	Switching Regulator or Controllers	.635 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G20	1		1.75 mm	3.9 mm	Not Qualified		3.3 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 4.95V	2.35 V	e0			245	8.65 mm		5.5 V
MAX685ETG	Maxim Integrated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	24	VQCCN	SQUARE	YES	480 kHz	PLASTIC/EPOXY		.44 A	1		CMOS	NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		QUAD	S-PQCC-N24	1		.8 mm	4 mm	Not Qualified		5 V		2.7 V	e0			245	4 mm		5.5 V
TPS62042DGQ	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HTSSOP	SQUARE	YES	1500 kHz	PLASTIC/EPOXY		2.2 A	1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel	1.5 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	1.5 V	DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified		3.6 V	PFM MODE IS ALSO AVAILABLE	2.5 V	e4	NOT SPECIFIED	1	260	3 mm		6 V
TPS64201DBVT	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	450 kHz	PLASTIC/EPOXY		3 A	1			GULL WING				SINGLE	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	1.2 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	6.5 V	DUAL	R-PDSO-G6	1		1.45 mm	1.6 mm	Not Qualified		3.8 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.2 V TO 6.5 V	1.8 V	e4	30	1	260	2.9 mm		6.5 V
TPS65110RGE	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	24	VQCCN	SQUARE	YES	520 kHz	PLASTIC/EPOXY			1			NO LEAD			2.5/5	TRIPLER	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel			QUAD	S-PQCC-N24			1 mm	4 mm	Not Qualified		3.6 V		2.4 V		NOT SPECIFIED		NOT SPECIFIED	4 mm		5.5 V
TPS65111RGE	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	24	VQCCN	SQUARE	YES	520 kHz	PLASTIC/EPOXY			1			NO LEAD			2.5/5	TRIPLER	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel			QUAD	S-PQCC-N24			1 mm	4 mm	Not Qualified		3.6 V		2.4 V		NOT SPECIFIED		NOT SPECIFIED	4 mm		5.5 V
UCC28220D	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY	6 mA	.01 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		BUCK-BOOST	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	105 Cel	3.15 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.45 V	DUAL	R-PDSO-G16	1	14.5 V	1.75 mm	3.9 mm	Not Qualified	8.4 V	12 V		8 V	e4	30		260	9.9 mm	3.3 V	14.5 V
UCC28220PWR	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY	6 mA	.01 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		BUCK-BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	105 Cel	3.15 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.45 V	DUAL	R-PDSO-G16	1	14.5 V	1.2 mm	4.4 mm	Not Qualified	8.4 V	12 V		8 V	e4	30		260	5 mm	3.3 V	14.5 V
UCC28220PW	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY	6 mA	.01 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		BUCK-BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	105 Cel	3.15 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.45 V	DUAL	R-PDSO-G16	1	14.5 V	1.2 mm	4.4 mm	Not Qualified	8.4 V	12 V		8 V	e4	30		260	5 mm	3.3 V	14.5 V
UCC28221DR	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY		.01 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G16			1.75 mm	3.9 mm	Not Qualified		12 V		8 V		NOT SPECIFIED		NOT SPECIFIED	9.9 mm		14.5 V
UCC28221PWR	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY		.01 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	105 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G20			1.2 mm	4.4 mm	Not Qualified		12 V		8 V		NOT SPECIFIED		NOT SPECIFIED	6.5 mm		14.5 V
UCC2891D	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	3 mA	2.5 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		BUCK-BOOST	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	16 V	1.75 mm	3.9 mm	Not Qualified	8.5 V	12 V		8.5 V	e4	30		260	9.9 mm		16 V
UCC2892DR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	3 mA	2.5 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		BUCK-BOOST	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	16 V	1.75 mm	3.9 mm	Not Qualified	8.5 V	12 V		8.5 V	e4	30		260	9.9 mm		16 V
UCC2894DR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	3 mA	2.5 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		BUCK-BOOST	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	16 V	1.75 mm	3.9 mm	Not Qualified	8.5 V	12 V		8.5 V	e4	30		260	9.9 mm		16 V
UCC2894PWR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	3 mA	2.5 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		BUCK-BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	16 V	1.2 mm	4.4 mm	Not Qualified	8.5 V	12 V		8.5 V	e4	30		260	5 mm		16 V
STOD02PUR	STMicroelectronics	SWITCHING REGULATOR	INDUSTRIAL	12	HVSON	RECTANGULAR	YES	1850 kHz	PLASTIC/EPOXY		.1 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOLCC12,.12,20	Switching Regulator or Controllers	.45 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-N12	1		.8 mm	3 mm	Not Qualified		3.7 V		2.5 V	e3	30		260	3 mm	4.6 V	4.5 V
STOD02TPUR	STMicroelectronics	SWITCHING REGULATOR	INDUSTRIAL	12	HVSON	RECTANGULAR	YES	1850 kHz	PLASTIC/EPOXY		.1 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOLCC12,.12,20	Switching Regulator or Controllers	.45 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-N12	1		.6 mm	3 mm	Not Qualified		3.7 V		2.5 V	e3	30		260	3 mm	4.6 V	4.5 V
MAX1858AEEG	Maxim Integrated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	24	SSOP	RECTANGULAR	YES	660 kHz	PLASTIC/EPOXY		10 A	2		BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24	Switching Regulator or Controllers	.635 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G24	1		1.73 mm	3.9 mm	Not Qualified		5 V		4.5 V	e0			245	8.65 mm		5.5 V
MAX5038AEAI15	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	525 kHz	PLASTIC/EPOXY			1		BICMOS	GULL WING	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G28	1		1.99 mm	5.29 mm	Not Qualified		5 V		4.75 V	e0			245	10.2 mm		5.5 V
MAX5038AEAI18	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	525 kHz	PLASTIC/EPOXY			1		BICMOS	GULL WING	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G28	1		1.99 mm	5.29 mm	Not Qualified		5 V		4.75 V	e0			245	10.2 mm		5.5 V
MAX5038AEAI25	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	525 kHz	PLASTIC/EPOXY			1		BICMOS	GULL WING	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G28	1		1.99 mm	5.29 mm	Not Qualified		5 V		4.75 V	e0			245	10.2 mm		5.5 V
MAX5041AEAI	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	525 kHz	PLASTIC/EPOXY			1		BICMOS	GULL WING	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G28	1		1.99 mm	5.29 mm	Not Qualified		5 V		4.75 V	e0			245	10.2 mm		5.5 V
MAX5065EAI	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	525 kHz	PLASTIC/EPOXY			1		BICMOS	GULL WING	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G28	1		1.99 mm	5.29 mm	Not Qualified		5 V		4.75 V	e0			245	10.2 mm		5.5 V
NCP1406SNT1	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		1.5 A	1			GULL WING	PULSE FREQUENCY MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G5			1.1 mm	1.5 mm	Not Qualified		3 V	ALSO OPERATES IN ADJUSTABLE VOLTAGE AS LOW AS 25V	1.4 V	e0			235	3 mm		5.5 V
UCC27223PWPR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	14	HTSSOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY		3 A	1	2	BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Switching Regulator or Controllers	.65 mm	105 Cel	6.2 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	6.8 V	DUAL	R-PDSO-G14	2		1.2 mm	4.4 mm	Not Qualified		12 V		4.4 V	e4	30		260	5 mm		20 V
MAX5058EUI	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	28	HTSSOP	RECTANGULAR	YES	250 kHz	PLASTIC/EPOXY		5 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G28	1		1.1 mm	4.4 mm	Not Qualified		12 V		4.5 V	e0			245	9.7 mm		28 V
MAX5059EUI	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	28	HTSSOP	RECTANGULAR	YES	250 kHz	PLASTIC/EPOXY		5 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G28	1		1.1 mm	4.4 mm	Not Qualified		12 V		4.5 V	e0			245	9.7 mm		28 V
UCC2819APWR	Texas Instruments	POWER FACTOR CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	250 kHz	PLASTIC/EPOXY	4 mA	1.2 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V	12	BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	2	17 V	1.2 mm	4.4 mm	Not Qualified		12 V		10.8 V	e4	30		260	5 mm		17 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.