INDUSTRIAL Switching Regulators & Controllers 2,228

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Nominal Input Voltage	Additional Features	Minimum Input Voltage	Maximum Negative Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
UCC2819APW	Texas Instruments	POWER FACTOR CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	250 kHz	PLASTIC/EPOXY	4 mA	1.2 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V	12	BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	2	17 V	1.2 mm	4.4 mm	Not Qualified	12 V		10.8 V		e4	30		260	5 mm		17 V
PM6686	STMicroelectronics	SWITCHING CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES	500 kHz	UNSPECIFIED		.00005 A	1		NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER	LCC32,.2SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		QUAD	S-XQCC-N32	3		1 mm	5 mm	Not Qualified	12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7 TO 5.5 V, ALSO OPERATES AS LDO REGULATOR	5.5 V		e3	30		260	5 mm	5 V	28 V
TPS65145PWP	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	24	HTSSOP	RECTANGULAR	YES	2100 kHz	PLASTIC/EPOXY	.9 mA	1.56 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION	3.3 V	3.3	BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Power Management Circuits	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G24	2		1.2 mm	4.4 mm	Not Qualified	3.3 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 5V TO 15V	2.7 V	-2 V	e4	30		260	7.8 mm	3.3 V	5.5 V
TPS62620YFDR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	6600 kHz	PLASTIC/EPOXY		.6 A	1		BALL	PULSE WIDTH MODULATION			BUCK	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	1.82 V	VOLTAGE-MODE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	1.82 V	BOTTOM	R-PBGA-B6	1		.4 mm	1.1 mm	Not Qualified	3.6 V	PFM CONTROL TECHNIQUE IS ALSO POSSIBLE	2.3 V		e1	NOT SPECIFIED	1	260	1.5 mm	1.82 V	5.5 V
TPS62622YFFR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	6600 kHz	PLASTIC/EPOXY		.6 A	1		BALL	PULSE WIDTH MODULATION			BUCK	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	1.5 V	VOLTAGE-MODE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	1.5 V	BOTTOM	R-PBGA-B6	1		.625 mm	1.2 mm	Not Qualified	3.6 V	PFM CONTROL TECHNIQUE IS ALSO POSSIBLE	2.3 V		e1	NOT SPECIFIED	1	260	1.6 mm	1.5 V	5.5 V
NCP1400ASN50T1G	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	216 kHz	PLASTIC/EPOXY		.4 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN		DUAL	R-PDSO-G5	1		1.1 mm	1.5 mm	Not Qualified	5 V		.95 V		e3	30		260	3 mm		5 V
MC33260DR2G	Onsemi	POWER FACTOR CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	8 mA	.5 A	1		GULL WING	PULSE WIDTH MODULATION	13 V	13	BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	105 Cel		VOLTAGE-MODE	-40 Cel	TIN		DUAL	R-PDSO-G8			1.75 mm	3.9 mm	Not Qualified	13 V		8.5 V		e3			260	4.9 mm		16 V
TPS40090PW	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		120 A	1		GULL WING	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	.7 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	R-PDSO-G24	1		1.2 mm	4.4 mm	Not Qualified	12 V	IT CAN ALSO OPERATE WITH CURRENT MODE	4.5 V		e4	30	1	260	7.8 mm		15 V
UCC2817AD	Texas Instruments	POWER FACTOR CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	250 kHz	PLASTIC/EPOXY	4 mA	1.2 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		BOOST	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	12 V		10.3 V		e4	NOT SPECIFIED		260	9.9 mm		18 V
PT6303CT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	12		RECTANGULAR	YES	600 kHz	UNSPECIFIED		3 A	1	HYBRID	GULL WING				BUCK	MICROELECTRONIC ASSEMBLY	SMSIP12H,.7	Switching Regulator or Controllers	2.54 mm	85 Cel		VOLTAGE-MODE	-40 Cel			SINGLE	R-XSMA-G12					Not Qualified	10 V	INPUT VOLTAGE CAN BE UPTO 38V WHEN THE INHIBIT FUNCTION IS NOT USED	9 V			NOT SPECIFIED		NOT SPECIFIED		3.3 V	26 V
NCP1402SN40T1	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		.4 A	1	CMOS	GULL WING	PULSE FREQUENCY MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G5			1.1 mm	1.5 mm	Not Qualified	6 V		.95 V		e0			235	3 mm		6 V
NCP1500DMR2G	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	8	TSSOP	SQUARE	YES	630 kHz	PLASTIC/EPOXY		.8 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN		DUAL	S-PDSO-G8			1.1 mm	3 mm	Not Qualified	3.6 V		2.7 V		e3			260	3 mm		5.4 V
NCP1550SN33T1G	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	690 kHz	PLASTIC/EPOXY		.1 A	1		GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN		DUAL	R-PDSO-G5			1.1 mm	1.5 mm	Not Qualified	5 V	PFM CONTROL TECHNIQUE IS ALSO POSSIBLE	2.45 V		e3			260	3 mm		5.5 V
TPS62208DBVT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	1500 kHz	PLASTIC/EPOXY		.67 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	1.875 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1.875 V	DUAL	R-PDSO-G5	1		1.45 mm	1.6 mm	Not Qualified	3.6 V	PFM MODE ALSO AVAILABLE	2.5 V		e4	NOT SPECIFIED	1	260	2.9 mm		6 V
MC33167TVG	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	ZIP	RECTANGULAR	NO	81 kHz	PLASTIC/EPOXY		8 A	1	BIPOLAR	THROUGH-HOLE	PULSE WIDTH MODULATION			BUCK-BOOST	FLANGE MOUNT	ZIP5,.15,.17,67TB	Switching Regulator or Controllers	1.7 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN		ZIG-ZAG	R-PZFM-T5					Not Qualified	12 V		7.5 V		e3						40 V
MC33262DG	Onsemi	POWER FACTOR CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	20 mA	.5 A	1	BIPOLAR	GULL WING	PULSE WIDTH MODULATION	12 V	12	BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	TIN		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified	12 V		9 V		e3	30		260	4.9 mm	16 V	28 V
ADM660ARUZ-REEL7	Analog Devices	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY		.1 A	1	CMOS	GULL WING				DOUBLER INVERTER	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Other Analog ICs	.65 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1		1.2 mm	4.4 mm	Not Qualified	5 V		1.5 V		e3			260	5 mm		7 V
SI9110DY-T1-E3	Vishay Intertechnology	SWITCHING CONTROLLER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		.25 A	1	BCDMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOP14,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-G14	1		1.95 mm	3.9 mm	Not Qualified	48 V		10 V		e3	30		260	8.65 mm	4 V	120 V
SI9112DY-T1-E3	Vishay Intertechnology	SWITCHING CONTROLLER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		.25 A	1	BCDMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOP14,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G14	1		1.95 mm	3.9 mm	Not Qualified	12 V		9 V		e3	30		260	8.65 mm		80 V
SI9120DY-T1-E3	Vishay Intertechnology	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	3000 kHz	PLASTIC/EPOXY		.125 A	1	BCDMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified	10 V		9.5 V		e3	30		260	9.9 mm		13.5 V
TPS40009DGQ	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	10	HTSSOP	SQUARE	YES	600 kHz	PLASTIC/EPOXY		15 A	1		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel	.7 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	4 V	DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified	5 V		2.25 V		e4	30	1	260	3 mm		5.5 V
TPS40070PWPR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		2 A	1		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	7 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	9 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified	12 V		4.5 V		e4	30	1	260	5 mm		28 V
TPS40070PWP	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		2 A	1		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	7 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	9 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified	12 V		4.5 V		e4	30	1	260	5 mm		28 V
TPS54352PWP	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		6.5 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	1.2 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	1.2 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified	12 V		4.5 V		e4	30	1	260	5 mm	1.2 V	20 V
TPS54354PWPR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		6.5 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	1.8 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified	12 V		4.5 V		e4	30	1	260	5 mm	1.8 V	20 V
TPS54354PWP	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		6.5 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	1.8 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified	12 V		4.5 V		e4	30	1	260	5 mm	1.8 V	20 V
UCC2897PWR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	270 kHz	PLASTIC/EPOXY	3 mA	2.5 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	105 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	1		1.2 mm	4.4 mm	Not Qualified	12 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	8.5 V		e4	30		260	6.5 mm		14.5 V
UCC2897PW	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	270 kHz	PLASTIC/EPOXY	3 mA	2.5 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	105 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	1		1.2 mm	4.4 mm	Not Qualified	12 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	8.5 V		e4	30		260	6.5 mm		14.5 V
ADM8832ACPZ-REEL7	Analog Devices	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	20	HVQCCN	SQUARE	YES	140 kHz	UNSPECIFIED	.4 mA		1	CMOS	NO LEAD			3/3.3	TRIPLER	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-XQCC-N20	3		.9 mm	4 mm	Not Qualified	3 V		2.6 V		e3			260	4 mm		3.6 V
ADM8832ACPZ-REEL	Analog Devices	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	20	HVQCCN	SQUARE	YES	140 kHz	UNSPECIFIED	.4 mA		1	CMOS	NO LEAD			3/3.3	TRIPLER	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-XQCC-N20	3		.9 mm	4 mm	Not Qualified	3 V		2.6 V		e3			260	4 mm		3.6 V
NCP1400ASN22T1G	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	216 kHz	PLASTIC/EPOXY		.4 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN		DUAL	R-PDSO-G5	1		1.1 mm	1.5 mm	Not Qualified	5 V		.95 V		e3	30		260	3 mm		5 V
NCP1400ASN25T1G	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	216 kHz	PLASTIC/EPOXY		.4 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN		DUAL	R-PDSO-G5	1		1.1 mm	1.5 mm	Not Qualified	5 V		.95 V		e3	30		260	3 mm		5 V
NCP1400ASN45T1	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	216 kHz	PLASTIC/EPOXY		.4 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G5			1.1 mm	1.5 mm	Not Qualified	5 V		.95 V		e0			235	3 mm		5 V
MAX8543EEE	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	1200 kHz	PLASTIC/EPOXY			1	BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Switching Regulator or Controllers	.635 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified	13.2 V		3 V		e0	20		240	4.9 mm		13.2 V
MAX8544EEP	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	1200 kHz	PLASTIC/EPOXY			1	BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25	Switching Regulator or Controllers	.635 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G20	1		1.73 mm	3.9 mm	Not Qualified	13.2 V		3 V		e0				8.65 mm		13.2 V
NCP1422MNR2	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1200 kHz	PLASTIC/EPOXY		1.5 A	1		NO LEAD	PULSE FREQUENCY MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN LEAD		DUAL	S-PDSO-N10			1 mm	3 mm	Not Qualified	2.5 V		1 V		e0			235	3 mm		5 V
UCC2540PWPR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	30 mA	3.5 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified	12 V	PEAK CURRENT MODE ALSO POSSIBLE	8.5 V		e4	30		260	6.5 mm		35 V
UCC2540PWP	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	30 mA	3.5 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified	12 V	PEAK CURRENT MODE ALSO POSSIBLE	8.5 V		e4	30		260	6.5 mm		35 V
MAX1760ETB	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1200 kHz	PLASTIC/EPOXY		1.5 A	1		NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN LEAD		DUAL	S-PDSO-N10	1		.8 mm	3 mm	Not Qualified	.7 V	IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION			e0			245	3 mm		5.5 V
MAX1760HEUB	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	1200 kHz	PLASTIC/EPOXY		1.6 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN LEAD		DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified	.7 V	IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION			e0			245	3 mm		5.5 V
CS51033YDR8G	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	240 kHz	PLASTIC/EPOXY		1 A	1	BIPOLAR	GULL WING				SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified	3.3 V		3.135 V		e3	30		260	4.9 mm		3.465 V
TPS54010PWPR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	28	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		14 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	.9 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	2.5 V	DUAL	R-PDSO-G28	2		1.2 mm	4.4 mm	Not Qualified	2.5 V	ALSO REQUIRES 3V TO 4V SUPPLY	2.2 V		e4	30	1	260	9.7 mm		4 V
TPS54010PWP	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	28	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		14 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	.9 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	2.5 V	DUAL	R-PDSO-G28	2		1.2 mm	4.4 mm	Not Qualified	2.5 V	ALSO REQUIRES 3V TO 4V SUPPLY	2.2 V		e4	30	1	260	9.7 mm		4 V
MAX5070AASA	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		2 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified	15 V		12 V		e0	20		240	4.9 mm		25 V
MAX5070AAUA	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		2 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	S-PDSO-G8	1		1.1 mm	3 mm	Not Qualified	15 V		12 V		e0				3 mm		25 V
MAX5070BASA	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		2 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G8			1.75 mm	3.9 mm	Not Qualified	15 V		12 V		e0				4.9 mm		25 V
MAX5070BAUA	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		2 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	S-PDSO-G8	1		1.1 mm	3 mm	Not Qualified	15 V		12 V		e0				3 mm		25 V
MAX5071AASA	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		2 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G8			1.75 mm	3.9 mm	Not Qualified	15 V		12 V		e0				4.9 mm		25 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.