Industrial Comparators 407

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX994EUD-T	Maxim Integrated	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4			24 μA	0 V		5 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	450 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0		245 °C (473 °F)	0.197 in (5 mm)
MAX994EUD	Maxim Integrated	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4			24 μA	0 V		5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	SOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA		Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
MAX995ESD-T	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4			96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 nA	210 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX996EUD-T	Maxim Integrated	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4			96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	210 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
MAX9010EXT-T	Maxim Integrated	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		7 mV	2 uA	Yes	1	BIPOLAR		2.7 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 uA	5.5 ns		-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4			0.079 in (2 mm)
MAX9119EXK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	10 mV	2 nA	Yes	1			1.2 μA	0 V		5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	40 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0		245 °C (473 °F)	0.079 in (2 mm)
MAX9120EXK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	10 mV	2 nA	Yes	1			1.2 μA	0 V		5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	45 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
TS861AID	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	600 pA	Yes	1	BICMOS					5 V	2.7/10 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
TS861AIN	STMicroelectronics	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		10 mV	600 pA	No	1	BICMOS					5 V	2.7/10 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e3
ADCMP370AKS-REEL7	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel, 7 Inch		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead Over Silver	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0		240 °C (464 °F)	0.079 in (2 mm)
ADCMP370AKS-REEL	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15) - with Silver barrier	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
ADCMP371AKS-REEL7	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel, 7 Inch		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead Over Silver	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
ADCMP371AKS-REEL	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
ADCMP371AKSZ-REEL7	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel, 7 Inch		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
MAX913EUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-7 V	3 mV	8 uA	Yes	1	BIPOLAR		10 mA	-5 V		5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	5 uA	10 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9077EKA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		8 mV	-20 nA	Yes	2			6.6 μA			5 V	2.1/5.5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 nA	580 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
TSM109AIDT	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2				0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	105 °C (221 °F)		1.3 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TSM109AID	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2				0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	105 °C (221 °F)		1.3 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TSM109IDT	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2				0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	105 °C (221 °F)		1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TSM109ID	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2				0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	105 °C (221 °F)		1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
LMV393IDDURG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	VSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		300 μA		Tape And Reel	5 V	3/5 V	Small Outline, Very Thin Profile, Shrink Pitch	TSSOP8,.12,20	Comparators	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.035 in (0.9 mm)	0.079 in (2 mm)	No	e4		260 °C (500 °F)	0.091 in (2.3 mm)
AD8145WYCPZ-R7	Analog Devices	Comparator	Industrial	No Lead	32	HVQCCN	Square		-6 V	8 mV	-900 nA	Yes	3		AEC-Q100		-5 V		5 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile		Comparators	6 V	0.02 in (0.5 mm)	105 °C (221 °F)		6 ns		-40 °C (-40 °F)	Matte Tin	Quad	S-XQCC-N32	3	0.039 in (1 mm)	0.197 in (5 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
MIC841LBC5TR	Micrel	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy				Yes	1					Tape And Reel	1.6 V		Small Outline, Thin Profile, Shrink Pitch			7 V	0.026 in (0.65 mm)	85 °C (185 °F)		12 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No				0.079 in (2 mm)
MAX9201ESE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	1.5 nA	Yes	4	BIPOLAR			-5 V		5 V	±5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX9201EUE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	1.5 nA	Yes	4	BIPOLAR			-5 V		5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP16,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0	20 s	245 °C (473 °F)	0.197 in (5 mm)
MAX9202ESD	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	1.5 nA	Yes	2	BIPOLAR			-5 V		5 V	±5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX9202EUD	Maxim Integrated	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	1.5 nA	Yes	2	BIPOLAR			-5 V		5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
MAX9203EKA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	1.5 nA	Yes	1	BIPOLAR			-5 V		5 V	±5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
MAX9203ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	1.5 nA	Yes	1	BIPOLAR			-5 V		5 V	±5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
TS862ID	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		18 mV	600 pA	Yes	2	BICMOS					5 V	2.7/10 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
TS862IN	STMicroelectronics	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		18 mV	600 pA	No	2	BICMOS					5 V	2.7/10 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e3
TS864AIDT	STMicroelectronics	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		10 mV	600 pA	Yes	4	BICMOS		16 μA			5 V	2.7/10 V	Small Outline	SOP14,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.341 in (8.65 mm)
TS864AID	STMicroelectronics	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		10 mV	600 pA	Yes	4	BICMOS					5 V	2.7/10 V	Small Outline	SOP14,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
TS864AIN	STMicroelectronics	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		10 mV	600 pA	No	4	BICMOS					5 V	2.7/10 V	In-Line	DIP14,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3
TS864ID	STMicroelectronics	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		18 mV	600 pA	Yes	4	BICMOS					5 V	2.7/10 V	Small Outline	SOP14,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
TS864IN	STMicroelectronics	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		18 mV	600 pA	No	4	BICMOS					5 V	2.7/10 V	In-Line	DIP14,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3
MAX969ESE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		7 mV	50 nA	Yes	4	CMOS		22 μA			3 V	1.5/5.5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX966ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	50 nA	Yes	2	CMOS		10 μA			3 V	1.5/5.5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX972ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	2			3.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8				No	e0
MAX984ESE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4			8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1			No	e0
MAX961ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	1	CMOS		11 mA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX970ESD-T	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	50 nA	Yes	4	CMOS		18 μA			3 V	1.5/5.5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX974ESE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4			8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16				No	e0
MAX9107ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		4 mV	350 nA	Yes	2	BIPOLAR		700 μA			5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	350 nA	25 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX9108EUD	Maxim Integrated	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		4 mV	350 nA	Yes	4	BIPOLAR		700 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	350 nA	25 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
MAX9109ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		4 mV	350 nA	Yes	1	BIPOLAR		700 μA			5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	350 nA	25 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX9109EXT-T	Maxim Integrated	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		4 mV	350 nA	Yes	1	BIPOLAR		700 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	350 nA	25 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4			0.079 in (2 mm)
MAX9140EUK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		4.5 mV	320 nA	Yes	1	BIPOLAR		300 μA			5 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	320 nA			-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0		245 °C (473 °F)	0.114 in (2.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.