Industrial Comparators 407

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLC3704IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-18 V	7 mV	2 nA	Yes	4	CMOS	80 μA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC374IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS	600 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	30 pA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC374INE4	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		7 mV	2 nA	No	4	CMOS	800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.76 in (19.305 mm)
TLC393IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		5 mV	2 nA	Yes	2	CMOS	40 μA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC393IPWRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV	2 nA	Yes	2	CMOS	40 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TL331IDBVTE4	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR	700 μA			5 V	5/30 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	36 V	0.037 in (0.95 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
ADCMP551BRQZ	Analog Devices	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		10 mV	10 uA	Yes	1	BIPOLAR	17 mA			3.3 V	3.3 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	5 uA		Open-Emitter	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.069 in (1.7526 mm)	0.154 in (3.9116 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9022 mm)
ADCMP552BRQZ	Analog Devices	Comparator	Industrial	Gull Wing	20	SSOP	Rectangular	Plastic/Epoxy		10 mV	10 uA	Yes	1	BIPOLAR	17 mA			3.3 V	3.3 V	Small Outline, Shrink Pitch	SSOP20,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	5 uA		Open-Emitter	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G20	1	0.069 in (1.7526 mm)	0.154 in (3.9116 mm)	No	e3		260 °C (500 °F)	0.341 in (8.6614 mm)
ADCMP572BCPZ-WP	Analog Devices	Comparator	Industrial	No Lead	16	HVQCCN	Square			5 mV		Yes	1	BIPOLAR	52 mA			3.3 V	3.3/5 V	Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC16,.12SQ,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	50 uA	0.165 ns		-40 °C (-40 °F)	Matte Tin	Quad	S-XQCC-N16	3	0.039 in (1 mm)	0.118 in (3 mm)	No	e3		260 °C (500 °F)	0.118 in (3 mm)
ADCMP573BCPZ-WP	Analog Devices	Comparator	Industrial	No Lead	16	HVQCCN	Square			5 mV		Yes	1	BIPOLAR	80 mA			3.3 V	3.3/5 V	Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC16,.12SQ,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	50 uA	0.165 ns		-40 °C (-40 °F)	Matte Tin	Quad	S-XQCC-N16	3	0.039 in (1 mm)	0.118 in (3 mm)	No	e3		260 °C (500 °F)	0.118 in (3 mm)
ADCMP565BPZ	Analog Devices	Comparator	Industrial	J Bend	20	QCCJ	Square	Plastic/Epoxy	-6 V	6 mV	40 uA	Yes	2			-5.2 V		5 V		Chip Carrier		Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		0.375 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Quad	S-PQCC-J20	1	0.18 in (4.57 mm)	0.353 in (8.965 mm)	No	e3		260 °C (500 °F)	0.353 in (8.965 mm)
TLV3012AIDBVTG4	Texas Instruments	Comparator	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		15 mV		Yes	1		5 μA		Tape And Reel	5 V	2/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	125 °C (257 °F)		12 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	2	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4		260 °C (500 °F)	0.114 in (2.9 mm)
NCS2202SQ2T2G	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV		Yes	1	CMOS	17 μA	0 V	Tape And Reel	3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	105 °C (221 °F)		1.1 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	40	260 °C (500 °F)	0.079 in (2 mm)
TLV3012AIDCKRG4	Texas Instruments	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		15 mV		Yes	1		5 μA		Tape And Reel	5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)		12 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4		260 °C (500 °F)	0.079 in (2 mm)
MAX920EUK	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1					5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)		120 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)					0.114 in (2.9 mm)
NCX2200GF3,132	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Square	Plastic/Epoxy		30 mV		Yes	1		9 μA		Tape And Reel, 7 Inch	1.6 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC8,.04,14	Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		800 ns	Push-Pull	-40 °C (-40 °F)	Tin	Dual	S-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.039 in (1 mm)
NCX2202GM,115	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1		9 μA		Tape And Reel, 7 Inch	1.6 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC6,.04,20	Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns	Open-Drain	-40 °C (-40 °F)	Tin	Dual	R-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.057 in (1.45 mm)
NCX2220GF,115	NXP Semiconductors	Comparator	Industrial	No Lead	8	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1		7 μA	0 V		3 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC6,.04,14	Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)	Tin	Dual	R-PDSO-N8	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.053 in (1.35 mm)
NCX2220GT,115	NXP Semiconductors	Comparator	Industrial	No Lead	8	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1		7 μA	0 V		3 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC8,.04,20	Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-N8	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e4	30 s	260 °C (500 °F)	0.077 in (1.95 mm)
UPC393GR(5)-9LG-E1-A	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		2.5 mV	60 nA	Yes	2	BIPOLAR	1 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	32 V	0.026 in (0.65 mm)	85 °C (185 °F)	60 nA	1.8 µs	Open-Collector	-40 °C (-40 °F)	Tin Bismuth	Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No	e6			0.173 in (4.4 mm)
UPC393GR-9LG-E2-A	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV	250 nA	Yes	2	BIPOLAR	1 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	32 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1.8 µs	Open-Collector	-40 °C (-40 °F)	Tin Bismuth	Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No	e6			0.173 in (4.4 mm)
HMC674LC3CTR-R5	Analog Devices	Comparator	Industrial	No Lead	16	HVQCCN	Square	Ceramic, Metal-Sealed Cofired	-3.3 V			Yes	1			-3 V		3.3 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile		Comparators	4 V	0.02 in (0.5 mm)	85 °C (185 °F)		0.085 ns		-40 °C (-40 °F)		Quad	S-CQCC-N16		0.036 in (0.92 mm)	0.114 in (2.9 mm)					0.114 in (2.9 mm)
HMC974LC3CTR-R5	Analog Devices	Comparator	Industrial	No Lead	16	HVQCCN	Square	Ceramic, Metal-Sealed Cofired	-3.3 V	10 mV	30 uA	Yes	1			-3 V		3.3 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile		Comparators	4 V	0.02 in (0.5 mm)	85 °C (185 °F)		0.088 ns		-40 °C (-40 °F)		Quad	S-CQCC-N16		0.035 in (0.9 mm)	0.114 in (2.9 mm)					0.114 in (2.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.