Industrial Comparators 407

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX967ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	50 nA	Yes	2						3 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX967EUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		15 mV	50 nA	Yes	2						3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX968ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	50 nA	Yes	2						3 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9691ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	1			36 mA	-5.2 V		5 V	5,-5.2 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9691EUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	1			36 mA	-5.2 V		5 V	5,-5.2 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9692ESE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	1			36 mA	-5.2 V		5 V	5,-5.2 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX9693ESE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	HSSOP	Rectangular	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	2			50 mA	-5.2 V		5 V	5,-5.2 V	Small Outline, Heat Sink/Slug, Shrink Pitch	SOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16		0.068 in (1.73 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.89 mm)
MAX969EEE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		10 mV	50 nA	Yes	4	CMOS		22 μA			3 V	1.5/5.5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.89 mm)
MAX970EEE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		10 mV	50 nA	Yes	4	CMOS		18 μA			3 V	1.5/5.5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.89 mm)
MAX971ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	1			3.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1			No	e0
MAX973ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	2			5.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1			No	e0
MAX975ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	-300 nA	Yes	1	CMOS		5 μA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX976ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	2	CMOS		650 μA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX977EEE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		3 mV	-400 nA	Yes	2	CMOS		6 μA			5 V	3/5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	400 nA	28 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.89 mm)
MAX981ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	1			3.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8				No	e0
MAX982ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	2			5.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1			No	e0		245 °C (473 °F)
MAX983ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	2			5.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1			No	e0
MAX997ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	1	CMOS		6.5 mA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX998ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	1	CMOS		650 μA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9026EBT-T	Maxim Integrated	Comparator	Industrial	Ball	6	VFBGA	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1	BICMOS		2.2 μA			5 V	5 V	Grid Array, Very Thin Profile, Fine Pitch	BGA6,2X3,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	1 nA	31 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Bottom	R-PBGA-B6	1	0.026 in (0.67 mm)	0.046 in (1.16 mm)	No	e0			0.062 in (1.57 mm)
MAX9027EBT-T	Maxim Integrated	Comparator	Industrial	Ball	6	VFBGA	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1	BICMOS		1.25 μA			5 V	5 V	Grid Array, Very Thin Profile, Fine Pitch	BGA6,2X3,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	1 nA	40 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Bottom	R-PBGA-B6	1	0.026 in (0.67 mm)	0.046 in (1.16 mm)	No	e0			0.062 in (1.57 mm)
MAX9028EBT-T	Maxim Integrated	Comparator	Industrial	Ball	6	VFBGA	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1	BICMOS		1.25 μA			5 V	5 V	Grid Array, Very Thin Profile, Fine Pitch	BGA6,2X3,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	1 nA	45 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead	Bottom	R-PBGA-B6	1	0.026 in (0.67 mm)	0.046 in (1.16 mm)	No	e0			0.062 in (1.57 mm)
LM2903NG	Onsemi	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		15 mV	500 nA	No	2	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	105 °C (221 °F)		1.5 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T8		0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e3			0.365 in (9.27 mm)
AD8611ARZ	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	-4 uA	Yes	1			10 mA	0 V		3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		4.5 ns		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
AD8611ARZ-REEL	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	-4 uA	Yes	1			10 mA	0 V	Tape And Reel	3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		4.5 ns		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
ADCMP566BCPZ	Analog Devices	Comparator	Industrial	No Lead	32	HVQCCN	Square		-6 V	5 mV	42 uA	Yes	2				-5.2 V		5 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile		Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		0.29 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Quad	S-XQCC-N32	3	0.039 in (1 mm)	0.197 in (5 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
ADCMP567BCPZ	Analog Devices	Comparator	Industrial	No Lead	32	HVQCCN	Square		-6 V	5 mV	42 uA	Yes	2			20 mA	-5.2 V		5 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC32,.2SQ,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	42 uA	0.3 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Quad	S-XQCC-N32	3	0.031 in (0.8 mm)	0.197 in (5 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
CMP04FSZ	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	2 mV	200 nA	Yes	4	BIPOLAR		3 mA	0 V		5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	100 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.341 in (8.65 mm)
TS864IYDT	STMicroelectronics	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		18 mV	600 pA	Yes	4	BICMOS	AEC-Q100	64 μA			5 V	2.7/10 V	Small Outline	SOP14,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLC339IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC393IPE4	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		5 mV	2 nA	No	2	CMOS		40 μA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
ADCMP561BRQZ	Analog Devices	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy	-6 V	10 mV	10 uA	Yes	1				-5.2 V		5 V		Small Outline, Shrink Pitch		Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)			Open-Emitter	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.069 in (1.7526 mm)	0.154 in (3.9116 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9022 mm)
ADCMP563BRQZ	Analog Devices	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy	-6 V	10 mV	10 uA	Yes	2	BIPOLAR			-5.2 V		5 V	5,-5.2 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	10 uA	.83 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.91 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
ADCMP564BRQZ	Analog Devices	Comparator	Industrial	Gull Wing	20	SSOP	Rectangular	Plastic/Epoxy	-6 V	10 mV	10 uA	Yes	2	BIPOLAR			-5.2 V		5 V	5,-5.2 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	10 uA	.83 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G20	1	0.069 in (1.75 mm)	0.154 in (3.91 mm)	No	e3		260 °C (500 °F)	0.341 in (8.66 mm)
TL3016IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V	Tape And Reel	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA	7.8 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC354IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		400 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLC372IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS		300 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	30 pA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
TLV2354IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		600 μA		Tape And Reel	3 V	3/5 V	Small Outline	SOP14,.25	Comparators	8 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
LM2903DG	Onsemi	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		15 mV	500 nA	Yes	2	BIPOLAR		2.5 mA			5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	1.5 µs	Open-Collector	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
NCS2200SQ2T2	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	10 nA	Yes	1	CMOS		17 μA	0 V		3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	105 °C (221 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0		235 °C (455 °F)	0.079 in (2 mm)
LM211DRE4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	4 mV	150 nA	Yes	1	BIPOLAR			-15 V		15 V	±15 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)		115 ns	Open-Collector, Open-Emitter	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TL3016IPWRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V	Tape And Reel	5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 uA	7.8 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TL3116IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	1.5 uA	Yes	1	BIPOLAR		14.7 mA	-5 V	Tube	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	1.1 uA	9.9 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC352IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	5 mV	2 nA	Yes	2	CMOS		300 μA	0 V	Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC352IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	5 mV	2 nA	Yes	2	CMOS		300 μA	0 V	Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC352IPWG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	2 nA	Yes	2	CMOS		300 μA	0 V	Tube	5 V	1.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.173 in (4.4 mm)
TLC3702IPE4	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		7 mV	2 nA	No	2	CMOS		40 μA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
TLC3702IPWRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.173 in (4.4 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.