LINE DRIVER Line Drivers & Receivers 534

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Output Polarity	Receiver No. of Bits	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
THC63LVD827	Thine Electronics	LINE DRIVER	INDUSTRIAL	BALL	72	TFBGA	SQUARE	PLASTIC/EPOXY	YES	1.98 V	8	CMOS			GENERAL PURPOSE	88 mA	STANDARD	1.8 V			GRID ARRAY, THIN PROFILE, FINE PITCH	BGA72,9X9,25			.00001 Amp	1.62 V	.65 mm	85 Cel		DIFFERENTIAL	-40 Cel	8		BOTTOM	S-PBGA-B72		1.2 mm	7 mm		COMPLEMENTARY		YES				7 mm	.14 V
AD8141ACPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified			YES	e3	30	260	4 mm		0 ns
AD8141ACPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified			YES	e3	30	260	4 mm		0 ns
AD8141ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	1	.8 mm	4 mm	Not Qualified			YES	e3			4 mm		0 ns
AD8142ACPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified			YES	e3	30	260	4 mm		0 ns
AD8142ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified			YES	e3	30	260	4 mm		0 ns
BU7988KVT	ROHM	LINE DRIVER	OTHER	GULL WING	100	QFP	SQUARE	PLASTIC/EPOXY	YES									3.3 V		3.3	FLATPACK	TQFP100,.63SQ		Line Driver or Receivers			.5 mm	85 Cel			-20 Cel		TIN COPPER	QUAD	S-PQFP-G100				Not Qualified				e2		260			0 ns
ADN4667WARZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS	AEC-Q100	1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm				YES	e3	30	260	9.9 mm
DS92LV2421SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1				I2C	90 mA	STANDARD	1.8 V	1.89 V	1.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	7 mm		0 ns
DS92LV2421SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1				I2C	90 mA	STANDARD	1.8 V	1.89 V	1.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified			YES	e3	30	260	7 mm		0 ns
DS92LV2421SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1				I2C	90 mA	STANDARD	1.8 V	1.89 V	1.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	7 mm		0 ns
DS90C187LF/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	92	LGA	SQUARE	PLASTIC/EPOXY	YES		5					150 mA		1.8 V	1.89 V	1.8	GRID ARRAY	SLGA92,14X14,20	1.71 V	Line Driver or Receivers			.5 mm	70 Cel	1.8 V		-10 Cel		NICKEL PALLADIUM GOLD	BOTTOM	S-PBGA-N92	3	1 mm	7 mm	Not Qualified		5	YES	e4	30	260	7 mm		0 ns
DS90C187LFE/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	92	LGA	SQUARE	PLASTIC/EPOXY	YES		5					150 mA		1.8 V	1.89 V	1.8	GRID ARRAY	SLGA92,14X14,20	1.71 V	Line Driver or Receivers			.5 mm	70 Cel	1.8 V		-10 Cel		NICKEL PALLADIUM GOLD	BOTTOM	S-PBGA-N92	3	1 mm	7 mm	Not Qualified		5	YES	e4	30	260	7 mm		0 ns
DS90C187LFX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	92	LGA	SQUARE	PLASTIC/EPOXY	YES		5					150 mA		1.8 V	1.89 V	1.8	GRID ARRAY	SLGA92,14X14,20	1.71 V	Line Driver or Receivers			.5 mm	70 Cel	1.8 V		-10 Cel		NICKEL PALLADIUM GOLD	BOTTOM	S-PBGA-N92	3	1 mm	7 mm	Not Qualified		5	YES	e4	30	260	7 mm		0 ns
DS32EL0421SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	2				EIA-644; TIA-644	152 mA	DIFFERENTIAL	3.3 V	2.625 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	2.375 V	Line Driver or Receivers		3.135 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified	TRUE		YES	e3	30	260	7 mm		0 ns
DS32ELX0421SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	2				EIA-644; TIA-644	152 mA	DIFFERENTIAL	3.3 V		2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Line Driver or Receivers		3.135 V	.5 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified			YES	e3	30	260	7 mm		0 ns
NCV7381DP0G	Onsemi	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	50 V	1		AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER		5.25 V		SMALL OUTLINE, SHRINK PITCH		4.75 V			5.5 V	.65 mm	125 Cel	5 V		-40 Cel	1	TIN	DUAL	R-PDSO-G16	2	1.99 mm	5.3 mm			1	YES	e3	30	260	6.2 mm
NCV7381DP0R2G	Onsemi	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	50 V	1		AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER		5.25 V		SMALL OUTLINE, SHRINK PITCH		4.75 V			5.5 V	.65 mm	125 Cel	5 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	2	1.99 mm	5.3 mm			1	YES	e3	30	260	6.2 mm
DS90UB301QSQ/NOPB	Texas Instruments	LINE DRIVER																															NICKEL PALLADIUM GOLD			3							e4	30	260
DS90UB301QSQE/NOPB	Texas Instruments	LINE DRIVER																															NICKEL PALLADIUM GOLD			3							e4	30	260
DS90UH301QSQ/NOPB	Texas Instruments	LINE DRIVER																															NICKEL PALLADIUM GOLD			3							e4	30	260
DS90UH301QSQE/NOPB	Texas Instruments	LINE DRIVER																															NICKEL PALLADIUM GOLD			3							e4	30	260
DS90UH301QSQX/NOPB	Texas Instruments	LINE DRIVER																															NICKEL PALLADIUM GOLD			3							e4	30	260
DS90C241IVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	7 mm		0 ns
DS90C241QVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	7 mm		0 ns
DS90C241QVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	7 mm		0 ns
ADA4312-1ACPZ-R2	Analog Devices	LINE DRIVER																															MATTE TIN			3							e3	30	260			0 ns
ADA4312-1ACPZ-RL	Analog Devices	LINE DRIVER																															MATTE TIN			3							e3	30	260			0 ns
HI-8597PSTF	Holt Integrated Circuits	LINE DRIVER	MILITARY	GULL WING	16	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				ARINC 429		STANDARD	3.3 V		3.3	SMALL OUTLINE, HEAT SINK/SLUG	SOP16,.4		Line Driver or Receivers	.0000001 Amp	3 V	1.27 mm	125 Cel		3-STATE	-55 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G16	1		7.5 mm	Not Qualified			YES	e3	40	260	10.3 mm	9 V	0 ns
DS90UH927QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			160 mA		3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified			NO	e3	30	260	6 mm		0 ns
DS90UH927QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			160 mA		3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified			NO	e3	30	260	6 mm		0 ns
DS90UH927QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			160 mA		3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified			NO	e3	30	260	6 mm		0 ns
ADA4930-1SCPZ-EPR7	Analog Devices	LINE DRIVER																															NICKEL PALLADIUM GOLD			3							e4	30	260			0 ns
ADA4930-1SCPZ-EPRL	Analog Devices	LINE DRIVER																															NICKEL PALLADIUM GOLD			3							e4		260			0 ns
LMH0002SQ/S250	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1				GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers		3.135 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	1	.8 mm	4 mm	Not Qualified			YES	e3	30	260	4 mm	.75 V	0 ns
DS26LS31N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		15 ns	EIA-422; FED STD 1020		STANDARD	5 V		5	IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDIP-T16	1	4.318 mm	7.62 mm	Not Qualified			YES	e0			19.05 mm	2 V	0 ns
DS99R103TSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	95 mA	STANDARD	3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	7 mm		0 ns
DS90C365AMTX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS			EIA-644; TIA-644	60 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	12.5 mm		0 ns
DS92LV1023EMQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	90 mA	STANDARD	3.3 V		3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.3 mm	Not Qualified			YES	e3	30	260	10.2 mm		0 ns
DS90CR483AVJD/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4			100 ns		210 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified	COMPLEMENTARY	8	YES	e4	30	260	14 mm	2.7 V	0 ns
DS90CR483AVJDX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4			100 ns		210 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified	COMPLEMENTARY	8	YES	e4	30	260	14 mm	2.7 V	0 ns
DS92LV3221TVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		2	CMOS		10 ns		145 mA		3.3 V	3.465 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	10 mm	2.4 V	0 ns
DS92LV3221TVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		2	CMOS		10 ns		145 mA		3.3 V	3.465 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	10 mm	2.4 V	0 ns
DS92LV3241TVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4			10 ns		200 mA		3.3 V	3.465 V	1.8/3.3,3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	10 mm	2.4 V	0 ns
DS92LV3241TVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4			10 ns		200 mA		3.3 V	3.465 V	1.8/3.3,3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	10 mm	2.4 V	0 ns
LMH0001SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1				GENERAL PURPOSE	43 mA	DIFFERENTIAL	3.3 V	3.465 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	1	.8 mm	4 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	4 mm	.75 V	0 ns
AM26LS31MW/883	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES		4	BIPOLAR	38535Q/M;38534H;883B	30 ns		60 mA		5 V	5.5 V	5	FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.00002 Amp		1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-CDFP-F16	1	2.032 mm	6.35 mm	Not Qualified	TRUE		YES	e0			9.906 mm	2 V	0 ns
DS30BA101SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1					59 mA		3.3 V	3.465 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.635 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	3	.8 mm	4 mm	Not Qualified	COMPLEMENTARY	1	YES	e3	30	260	4 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.