LINE DRIVER Line Drivers & Receivers 534

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75114DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE	50 mA	GATED	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	1.55 V	0 ns
SN75150DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2		BIPOLAR		.2 ns	EIA-232-E; V.28		STANDARD	12 V	13.2 V	+-12	-12 V	SMALL OUTLINE	SOP8,.25	10.8 V	Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e4	NOT SPECIFIED	260	4.9 mm	10 V	0 ns
SN75ALS174ADWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		22 ns	EIA-422-B; TIA-442-B; EIA-485	55 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	60 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SNJ55183FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535	16 ns	GENERAL PURPOSE	36 mA	GATED	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00012 Amp	4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	1.3 V	0 ns
SNJ55ALS192W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	1		BIPOLAR		14 ns	V.11; EIA-422-B		STANDARD	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified		COMPLEMENTARY			YES				10.2 mm		0 ns
MAX234EJE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		CMOS		10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-GDIP-T16	1	5.08 mm	7.62 mm	Not Qualified				EXTERNAL CHARGE PUMP	NO	e0				10 V	10000 ns
MAX234MJE	Maxim Integrated	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		CMOS		10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0002 Amp	4.5 V	2.54 mm	125 Cel			-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16	1	5.08 mm	7.62 mm	Not Qualified				EXTERNAL CHARGE PUMP	NO	e0				10 V	10000 ns
MAX234CPE	Maxim Integrated	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4		CMOS		10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDIP-T16	1	4.572 mm	7.62 mm	Not Qualified				EXTERNAL CHARGE PUMP	NO	e0			19.175 mm	10 V	10000 ns
MAX234EPE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4		CMOS		10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDIP-T16	1	4.572 mm	7.62 mm	Not Qualified				EXTERNAL CHARGE PUMP	NO	e0			19.175 mm	10 V	10000 ns
MAX234CWE	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified				EXTERNAL CHARGE PUMP	NO	e0			10.3 mm	10 V	10000 ns
MAX234EWE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified				EXTERNAL CHARGE PUMP	NO	e0			10.3 mm	10 V	10000 ns
MAX234C/D	Maxim Integrated	LINE DRIVER	COMMERCIAL	NO LEAD	16	DIE	UNSPECIFIED	UNSPECIFIED	YES	5.5 V	4		CMOS		10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V		5		UNCASED CHIP	DIE OR CHIP		Line Driver or Receivers		4.5 V		70 Cel			0 Cel	4	TIN LEAD	UPPER	X-XUUC-N				Not Qualified				EXTERNAL CHARGE PUMP	NO	e0				10 V	10000 ns
MAX4147ESD	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1					GENERAL PURPOSE		DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers			1.27 mm	85 Cel	-5 V	TOTEM-POLE	-40 Cel	1	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e0	20	240	8.65 mm	5 V	0 ns
SN65LBC174N	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4			19.305 mm	1.1 V	0 ns
SN75LBC172N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4			19.305 mm	1.5 V	0 ns
SN75LBC174N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4			19.305 mm	1.5 V	0 ns
SN65LBC172DW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.1 V	0 ns
SN65LBC174DWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.1 V	0 ns
SN75LBC172DWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN75LBC174DWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN65LVDS93DGG	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		13.38 ns	EIA-644; TIA-644	120 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	14 mm		0 ns
MAX202CPE	Maxim Integrated	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2		CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0002 Amp	4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2	TIN LEAD	DUAL	R-PDIP-T16	1	4.572 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0		245	19.175 mm	10 V	10000 ns
MAX202EPE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2		CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0002 Amp	4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDIP-T16	1	4.572 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0		245	19.175 mm	10 V	10000 ns
MAX203CPP	Maxim Integrated	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2	TIN LEAD	DUAL	R-PDIP-T20	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	2	INTERNAL CHARGE PUMP	NO	e0		245	26.16 mm	10 V	10000 ns
MAX205CPG	Maxim Integrated	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	5		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	5	TIN LEAD	DUAL	R-PDIP-T24	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS	NO	e0		245	30.545 mm	10 V	10000 ns
MAX207CNG	Maxim Integrated	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	3		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	5	TIN LEAD	DUAL	R-PDIP-T24	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e0		245	30.545 mm	10 V	10000 ns
MAX209CNG	Maxim Integrated	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3		CMOS			EIA-232-E; TIA-232-E; V.28	16 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		IN-LINE	DIP24,.3	9 V	Line Driver or Receivers		4.5 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	TIN LEAD	DUAL	R-PDIP-T24	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e0		245	30.545 mm	10 V	10000 ns
MAX209ENG	Maxim Integrated	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3		CMOS			EIA-232-E; TIA-232-E; V.28	16 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		IN-LINE	DIP24,.3	9 V	Line Driver or Receivers		4.5 V	2.54 mm	85 Cel	12 V	TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDIP-T24	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e0		245	30.545 mm	10 V	10000 ns
MAX202CSE	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0	20	245	9.9 mm	10 V	10000 ns
MAX202CWE	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0		245	10.3 mm	10 V	10000 ns
MAX202ESE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0		245	9.9 mm	10 V	10000 ns
MAX203CWP	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2	INTERNAL CHARGE PUMP	NO	e0	20	240	12.8 mm	10 V	10000 ns
MAX203EWP	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2	INTERNAL CHARGE PUMP	NO	e0		245	12.8 mm	10 V	10000 ns
MAX206CAG	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	3	TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e0		245	8.2 mm	10 V	10000 ns
MAX207CAG	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.75 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e0			8.2 mm	10 V	10000 ns
MAX207CWG	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e0	20	245	15.4 mm	10 V	10000 ns
MAX207EAG	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.75 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e0		245	8.2 mm	10 V	10000 ns
MAX207EWG	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e0		245	15.4 mm	10 V	10000 ns
MAX208CAG	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified		INVERTED	4	EXTERNAL CHARGE PUMP	NO	e0		245	8.2 mm	10 V	10000 ns
MAX208EAG	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified		INVERTED	4	EXTERNAL CHARGE PUMP	NO	e0		245	8.2 mm	10 V	10000 ns
MAX209CWG	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS			EIA-232-E; TIA-232-E; V.28	16 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		SMALL OUTLINE	SOP24,.4	9 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e0		245	15.4 mm	10 V	10000 ns
MAX209EWG	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS			EIA-232-E; TIA-232-E; V.28	16 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		SMALL OUTLINE	SOP24,.4	9 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V	TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e0		245	15.4 mm	10 V	10000 ns
MAX211EAI	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e0		245	10.2 mm	10 V	10000 ns
DRV604PWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.7 V	4	4				GENERAL PURPOSE	35 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.7 V	3.3		SMALL OUTLINE	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	3	1.2 mm	4.4 mm	Not Qualified		TRUE			NO	e4	30	260	9.7 mm	6.15 V	0 ns
SN55LVDS31W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	3.6 V	4		CMOS		4.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK	FL16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified		TRUE			YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	.247 V	0 ns
SN65LVDS31D	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	9.9 mm	.247 V	0 ns
MAX4448ESE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					GENERAL PURPOSE		STANDARD	5 V		+-5	-5 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e0			9.9 mm	10 V	0 ns
MAX4449ESE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					GENERAL PURPOSE		STANDARD	5 V		+-5	-5 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e0			9.9 mm	10 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.