LINE DRIVER Line Drivers & Receivers 534

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90UB913QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			80 mA			1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
DS90UB927QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			160 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm			COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS90UR241IVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1	CMOS	AEC-Q100			90 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm	2 V	0 ns
DS90UR241IVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1	CMOS	AEC-Q100			90 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm	2 V	0 ns
DS99R101VS/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1					95 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
LM4312SN/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES							33 mA		1.8 V		1.8		CHIP CARRIER	LCC48,.24SQ,16		Line Driver or Receivers			.4 mm	85 Cel			-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3			Not Qualified						e3	30	260			0 ns
SCAN921025HSMX/NOPB	Texas Instruments	LINE DRIVER	AUTOMOTIVE	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES		1					105 mA		3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32	3 V	Line Driver or Receivers			.8 mm	125 Cel	3.3 V	3-STATE	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B49	4	1.5 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e1	30	260	7 mm	2.2 V	0 ns
DS90UB928QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm		0 ns
DS90UH928QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm		0 ns
DS90UH928QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm		0 ns
DS90UH928QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm		0 ns
DS90UA101TRTVJQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100					1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
DS90UA101TRTVTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100					1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
MAX3188EEUT/GH9-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1				EIA-232; TIA-232		STANDARD	5.4 V			-5.4 V	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					4.5 V	.95 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm						NO				2.9 mm
SN55113J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	2	BIPOLAR		20 ns	GENERAL PURPOSE	65 mA	GATED	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.04 Amp	COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	1.6 V	0 ns
SN55188J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	15 V	4	BIPOLAR		350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	IN-LINE	DIP14,.3	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	2.54 mm	125 Cel	9 V	TOTEM-POLE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	.01 Amp	INVERTED		1 SINGLE INPUT DRIVER	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	12 V	0 ns
SN75C198N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	4	BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	GATED	12 V	15 V	+-5/+-12	-12 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel	12 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	8 V	0 ns
SN55110AJ	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR		15 ns	V.35	35 mA	GATED	5 V	5.5 V	+-5	-5 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V	OPEN-COLLECTOR	-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	.04 Amp	COMPLEMENTARY		HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	2 V	0 ns
SN75110AD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		15 ns	V.35	35 mA	GATED	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel	5 V	OPEN-COLLECTOR	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES	e4	NOT SPECIFIED	260	8.65 mm	2 V	0 ns
SN55114J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR		20 ns	GENERAL PURPOSE	50 mA	GATED	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	2	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	40000 Amp	COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e0			19.56 mm	1.6 V	0 ns
SN75114D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		30 ns	GENERAL PURPOSE	50 mA	GATED	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	.04 Amp	COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e4	NOT SPECIFIED	260	9.9 mm	1.55 V	0 ns
SN75109AD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		15 ns	GENERAL PURPOSE	30 mA	GATED	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN75158P	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	50 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES	e4			9.81 mm	2 V	0 ns
SN75158D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	50 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	4.9 mm	2 V	0 ns
AM26LV31CNS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified				BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	10.2 mm	.95 V	0 ns
SN75172DW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		65 ns	V.11; EIA-422-B; EIA-485	60 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	.36 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN75ALS172AN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		22 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	55 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4			19.305 mm	1.5 V	0 ns
SN75ALS172ADW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		22 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	55 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN75ALS174AN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		22 ns	EIA-422-B; TIA-442-B; EIA-485	55 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	60 Amp	COMPLEMENTARY			YES	e4			19.305 mm	1.5 V	0 ns
SN75ALS174ADW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		22 ns	EIA-422-B; TIA-442-B; EIA-485	55 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	60 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN55LBC174J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	4	BICMOS		40 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	60 Amp	COMPLEMENTARY			YES	e0			19.56 mm	1.1 V	0 ns
SN55183J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V	5.5 V	5		IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.00012 Amp	4.5 V	2.54 mm	125 Cel	5 V	TOTEM-POLE	-55 Cel	2	TIN LEAD	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	40 Amp	COMPLEMENTARY			YES	e0			19.56 mm	1.4 V	0 ns
SN75ALS191D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		7 ns	V.11; EIA-422-B	40 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	5 Amp	COMPLEMENTARY			YES	e4	30	260	4.9 mm	2 V	0 ns
SN75ALS194D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		14 ns	V.11; EIA-422-B	45 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	48 Amp	COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
ADM5170AP	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS		15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
SN75C188DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4	BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	STANDARD	12 V	15 V	+-12	-12 V	SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	.01 Amp	INVERTED		1 SINGLE INPUT DRIVER	NO	e4	NOT SPECIFIED	260	8.65 mm	8 V	0 ns
MAX1488EEPD	Maxim Integrated	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	13.2 V	4	CMOS		5400 ns	EIA-232; V.28; EIA-562	.18 mA	GATED	12 V	-13.2 V	+-4.5/+-13.2		IN-LINE	DIP14,.3	-4.5 V	Line Driver or Receivers	.000002 Amp	4.5 V	2.54 mm	85 Cel	-12 V	TOTEM-POLE	-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T14		4.572 mm	7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO	e0	20	240	19.05 mm	7.4 V	0 ns
MAX1488ECSD	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	4	CMOS		5400 ns	EIA-232; V.28; EIA-562	.18 mA	GATED	12 V	-13.2 V	+-4.5/+-13.2		SMALL OUTLINE	SOP14,.25	-4.5 V	Line Driver or Receivers	.000002 Amp	4.5 V	1.27 mm	70 Cel	-12 V	TOTEM-POLE	0 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO	e0		245	8.65 mm	7.4 V	0 ns
AM26C31CN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	20 Amp	COMPLEMENTARY			YES	e4			19.305 mm	2 V	0 ns
NCS5651MNTXG	Onsemi	LINE DRIVER																																MATTE TIN			1									e3	30	260
MAX234EWE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified				EXTERNAL CHARGE PUMP	NO	e0	20	240	10.3 mm	10 V	10000 ns
SNJ55113W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535	20 ns	GENERAL PURPOSE	65 mA	GATED	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified	.04 Amp	COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	1.6 V	0 ns
SNJ55113FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535	20 ns	GENERAL PURPOSE	65 mA	GATED	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	40000 Amp	COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	1.6 V	0 ns
SNJ55113J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR	MIL-PRF-38535	20 ns	GENERAL PURPOSE	65 mA	GATED	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.04 Amp	COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	1.6 V	0 ns
SNJ55188FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	15 V	4	BIPOLAR	MIL-PRF-38535	350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	CHIP CARRIER	LCC20,.35SQ	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	125 Cel	9 V	TOTEM-POLE	-55 Cel	4	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	12 V	0 ns
SNJ55110AJ	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR	MIL-PRF-38535	15 ns	V.35	35 mA	GATED	5 V	5.5 V	+-5	-5 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V	OPEN-COLLECTOR	-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	.04 Amp	COMPLEMENTARY		HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	2 V	0 ns
SNJ55114W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535	20 ns	GENERAL PURPOSE	50 mA	GATED	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified	40000 Amp	COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	1.6 V	0 ns
SNJ55114FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535	20 ns	GENERAL PURPOSE	50 mA	GATED	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	40000 Amp	COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e0			8.89 mm	1.6 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.