LINE DRIVER Line Drivers & Receivers 534

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX4362EUB	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.5 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	S-PDSO-G10	1	1.1 mm		3 mm	Not Qualified					NO	e0			3 mm		0 ns
SN75LVDS31PWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS	6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16		1.2 mm		4.4 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	5 mm	.247 V	0 ns
SN75LVDS9638DGKR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	2		DUAL	S-PDSO-G8		1.07 mm		3 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	3 mm	.247 V	0 ns
THS6043IPWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		5 V			5 V	.65 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.35 A	4.4 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
THS6052CDDAR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
THS6052IDDAR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
THS6052IDR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
THS6053IPWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR		GENERAL PURPOSE	8 mA	DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	5 V	Line Driver or Receivers		4.5 V	.65 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.175 A	4.4 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
AD8328ARQ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.635 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.75 mm		3.9116 mm	Not Qualified					YES	e0		240	8.65 mm		0 ns
THS6042CDDAR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE					5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
THS6042CDR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE					5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
THS6042IDDAR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE					5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
THS6042IDR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
THS6092CDDAR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V	2				GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
THS6092CDR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V	2				GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
SN75183NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	16 ns	GENERAL PURPOSE	18 mA	GATED	5 V	5.25 V	5		SMALL OUTLINE	SOP14,.3	4.75 V	Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified	.12 Amp	COMPLEMENTARY			YES	e4	30	260	10.2 mm	1.4 V	0 ns
SN75ALS191PSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		TTL	7 ns	EIA-422-B; TIA-422-B; V.11	40 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.3	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel	5 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified	5 Amp				YES	e4	30	260	6.2 mm	2 V	0 ns
SN75121NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	50 ns	GENERAL PURPOSE	60 mA	GATED	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	OPEN-EMITTER	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	8 Amp	TRUE			NO	e4	30	260	10.2 mm	2.4 V	0 ns
SN75ALS194NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR	14 ns	EIA-422-B; TIA-422-B; V.11	45 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	48 Amp				YES	e4	30	260	10.2 mm	2 V	0 ns
MAX3032EESE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS	16 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e0			9.9 mm	2 V	0 ns
MAX3033ECSE	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS	70 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e0			9.9 mm	2 V	0 ns
MAX3033ECUE	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS	70 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm		4.4 mm	Not Qualified					YES	e0			5 mm	2 V	0 ns
MAX3033EEUE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS	70 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm		4.4 mm	Not Qualified					YES	e0			5 mm	2 V	0 ns
THS6182DR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2				GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES WITH 24V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		0 ns
THS6182DWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2				GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G20		2.65 mm		7.5 mm	Not Qualified				ALSO OPERATES WITH 24V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	12.8 mm		0 ns
THS6182PWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2				GENERAL PURPOSE		STANDARD	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		5 V	.65 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G20		1.2 mm		4.4 mm	Not Qualified				CAN ALSO OPERATE WITH SINGLE SUPPLY OF 10V TO 30V	NO				6.5 mm		0 ns
THS6182RHFR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	5 V	Line Driver or Receivers		5 V	.5 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-PQCC-N24	2	1 mm	.6 A	4 mm	Not Qualified		TRUE		ALSO OPERATES WITH 24V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
THS6132VFPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	32	HLQFP	SQUARE	PLASTIC/EPOXY	YES	16 V	2				GENERAL PURPOSE		STANDARD	5 V	16 V	+-5/+-15	-5 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP32,.35SQ,32	3.3 V	Line Driver or Receivers		3.3 V	.8 mm	85 Cel	15 V		-40 Cel	2		QUAD	S-PQFP-G32		1.6 mm		7 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	7 mm		0 ns
FIN1027AM	Fairchild Semiconductor	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e3			4.9 mm	.25 V	0 ns
SN65LBC172A16DWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS	11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm	1 V	0 ns
SN75LBC172A16DWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS	11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified		TRUE			YES	e4	30	260	10.3 mm	1 V	0 ns
SN75LBC172A16DW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS	11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified		TRUE			YES	e4	30	260	10.3 mm	1 V	0 ns
MAX3293AUT-T	Maxim Integrated	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1		BICMOS	1300 ns	EIA-422; EIA-485		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Line Driver or Receivers		3.135 V	.95 mm	125 Cel		3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm		1.625 mm	Not Qualified					YES	e4	30	240	2.9 mm	1.5 V	0 ns
SN75LBC174A16DWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS	11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified		TRUE			YES	e4	30	260	10.3 mm	1 V	0 ns
SN75LBC174A16DW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS	11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified		TRUE			YES	e4	30	260	10.3 mm	1 V	0 ns
ADN4663BRZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	1.5 ns	EIA-644; TIA-644			3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e3	30	260	4.9 mm		1.5 ns
TB5D1MD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			3.5 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	NOT SPECIFIED	250	9.9 mm	.5 V	0 ns
TB5D2HDW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			3.5 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	2.65 mm		7.5 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	NOT SPECIFIED	250	10.3 mm	.5 V	0 ns
TB5D2HD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			3.5 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	NOT SPECIFIED	250	9.9 mm	.5 V	0 ns
MAX202CUE	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm		4.4 mm	Not Qualified			2		NO	e0			5 mm		10000 ns
MAX202EUE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING		TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G	1	1.1 mm		4.4 mm	Not Qualified			5		NO	e0			5 mm		40000 ns
EL5373IU	Intersil	LINE DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V		5	-5 V	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		Line Driver or Receivers		2.375 V	.635 mm	85 Cel		3-STATE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.7272 mm		3.9116 mm	Not Qualified					YES	e0			8.6614 mm	3.7 V	0 ns
MC1488D1013TR	STMicroelectronics	LINE DRIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	9.9 V	4			350 ns	EIA-232-C		STANDARD	9 V		+-9	-9 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	8.1 V	1.27 mm	75 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e4			8.65 mm	12 V	0 ns
STLVDS385BTR	STMicroelectronics	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Other Interface ICs		3 V	.5 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDSO-G56	3	1.2 mm		6.1 mm	Not Qualified					YES	e3	30	260	14 mm		0 ns
TB5D1MDR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			3.5 ns	GENERAL PURPOSE		STANDARD	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	.5 V	0 ns
TB5D1MDWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			3.5 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	2.65 mm		7.5 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	NOT SPECIFIED	250	10.3 mm	.5 V	0 ns
TB5D2HDR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			3.5 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	NOT SPECIFIED	250	9.9 mm	.5 V	0 ns
AD8138ARZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE	SOP8,.25				1.4 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e3	40	260	4.9 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.