LINE DRIVER Line Drivers & Receivers 534

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN65LVDS9638DG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	4.9 mm	.247 V	0 ns
SN65LVDS9638DGKG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	3 mm	.247 V	0 ns
SN65LVDS9638DGKRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	3 mm	.247 V	0 ns
SN75113NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE	65 mA	GATED	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	.04 Amp	COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	1.6 V	0 ns
SN75150DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2		BIPOLAR		.2 ns	EIA-232-E; V.28		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e4	30	260	4.9 mm	10 V	0 ns
SN75172DWRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		65 ns	V.11; EIA-422-B; EIA-485	60 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified	.36 Amp	COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	12.8 mm	1.5 V	0 ns
SN75174DWRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		65 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	60 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN75183DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V	5.25 V	5		SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	.12 Amp	COMPLEMENTARY			YES	e4	30	260	8.65 mm	1.3 V	0 ns
SN75ALS191DRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		TTL		7 ns	EIA-422-B; TIA-422-B; V.11	40 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	5 Amp	COMPLEMENTARY			YES	e4	30	260	4.9 mm	2 V	0 ns
SN75ALS191PE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		7 ns	V.11; EIA-422-B	40 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	5 Amp	COMPLEMENTARY			YES	e4			9.81 mm	2 V	0 ns
SN75C188DBRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4		BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e4	30	260	6.2 mm	8 V	0 ns
SN75C188DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4		BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	STANDARD	12 V	15 V	+-12	-12 V	SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	.01 Amp	INVERTED		1 SINGLE INPUT DRIVER	NO	e4	30	260	8.65 mm	8 V	0 ns
SN75C188DRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4		BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	STANDARD	12 V	15 V	+-12	-12 V	SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	.01 Amp	INVERTED		1 SINGLE INPUT DRIVER	NO	e4	NOT SPECIFIED	260	8.65 mm	8 V	0 ns
SN75LVDS31PWRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16		1.2 mm		4.4 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	5 mm	.247 V	0 ns
SN75LVDS387DGGRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	16		CMOS		2.9 ns	EIA-644; TIA-644	95 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	16	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G64	2	1.2 mm		6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	17 mm	.247 V	0 ns
SN75LVDS9638DRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm	.247 V	0 ns
UA9638CDRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		20 ns	EIA-422-B; TIA-422-B	65 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	4.9 mm	2 V	0 ns
UA9638CPE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		20 ns	EIA-422-B; TIA-422-B	65 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES	e4			9.81 mm	2 V	0 ns
AD45048ARZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	6 V		+-6/+-12	-6 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		1.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					NO	e3		260	4.9 mm	11.25 V	0 ns
ADA4950-1YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	Matte Tin (Sn)	QUAD	S-XQCC-N16	3	1 mm		3 mm	Not Qualified					YES	e3	40	260	3 mm		0 ns
ADA4950-1YCPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm		3 mm	Not Qualified					YES	e3			3 mm		0 ns
ADA4950-2YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm		4 mm	Not Qualified					YES	e3			4 mm		0 ns
ADA4950-2YCPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm		4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
SN75ALS192NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		14 ns	EIA-422-B; TIA-422-B; V.11	45 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	2 Amp	COMPLEMENTARY			YES	e4			19.305 mm	2 V	0 ns
THS6042CDDARG3	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE					5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
THS6042IDDARG3	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE					5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
THS6092CDDARG3	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
SN65LVDS31DG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	9.9 mm	.247 V	0 ns
SN65LVDS9638DGNRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	3 mm	.247 V	0 ns
SN75LVDS84ADGGRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	39 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	2	1.2 mm		6.1 mm	Not Qualified					YES	e4	NOT SPECIFIED	260	12.5 mm		0 ns
THS6052CDDARG3	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
THS6052IDDARG3	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
TLC59212IN	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	8		BICMOS			GENERAL PURPOSE		STANDARD	5 V		5		IN-LINE	DIP20,.3		Peripheral Drivers		4.5 V	2.54 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T20					Not Qualified					NO	e4					0 ns
TLC59213IN	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	13.2 V	8	8	BICMOS		250 ns	GENERAL PURPOSE	13 mA	STANDARD	5.5 V	13.2 V	4.5/13.2		IN-LINE	DIP20,.3	4.5 V	Display Drivers		4.5 V	2.54 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T20	1	5.08 mm		7.62 mm	Not Qualified		TRUE			NO	e4			25.4 mm		0 ns
AD815ARBZ-24-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	24	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1		BIPOLAR			GENERAL PURPOSE	55 mA	DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE, HEAT SINK/SLUG					5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G24	5	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e3		260	15.4 mm
UA9636ACPE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	13.2 V	2		BIPOLAR		140000 ns	EIA-232-E; TIA-232-E; V.10; V.28; EIA-423-B; TIA-423-B	18 mA	STANDARD	12 V	13.2 V	+-12	-12 V	IN-LINE	DIP8,.3	10.8 V	Line Driver or Receivers	.00001 Amp	10.8 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	8 V	0 ns
MC3487NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	85 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified					YES	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	2 V	0 ns
THS6042IDG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	33 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE		5 V			9 V	1.27 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	.35 A	3.9 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	4.9 mm		0 ns
SN75183NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	18 mA	GATED	5 V	5.25 V	5		IN-LINE	DIP14,.3	4.75 V	Line Driver or Receivers	.00012 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified	.12 Amp	COMPLEMENTARY			YES	e4			19.305 mm	1.3 V	0 ns
SN65LV1021DBG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE	50 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm		0 ns
SN65LVDS1DG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		TTL		3.1 ns	EIA-644-A; TIA-644-A	8 mA	STANDARD	3.3 V	3.6 V	2.5/3.3		SMALL OUTLINE	SOP8,.25	2.4 V	Line Driver or Receivers	.00002 Amp	2.4 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.02 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	.247 V	3.6 ns
AM26LS31MFKB	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	HQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883 Class B	30 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.5 V	5		CHIP CARRIER, HEAT SINK/SLUG	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified	20 Amp				YES	e0			8.89 mm	2 V	0 ns
AM26LS31MJB	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR	MIL-STD-883 Class B	30 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified	20 Amp				YES	e0			19.305 mm	2 V	0 ns
AM26LS31MWB	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	QFF	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4		BIPOLAR	MIL-STD-883 Class B	30 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Not Qualified	20 Amp				YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	2 V	0 ns
SN75174NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		65 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	60 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified					YES	e4			19.305 mm	1.5 V	0 ns
SN65LBC174A16DWRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm	1 V	0 ns
ADA4941-1YCPZ-RL	Analog Devices	LINE DRIVER	AUTOMOTIVE	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	12 V	1					GENERAL PURPOSE		DIFFERENTIAL	3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					2.7 V	.5 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	S-XDSO-N8	3	.9 mm		3 mm	Not Qualified					YES	e3		260	3 mm		0 ns
ADA4941-1YRZ-RL	Analog Devices	LINE DRIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	1					GENERAL PURPOSE		DIFFERENTIAL	3 V				SMALL OUTLINE					2.7 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e3	30	260	4.9 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.