INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Terminal Form	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold
MAX704SESA-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.05 mA		1	1	CMOS	GULL WING		3.3/5	SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified			e0				4.9 mm	NO
TPS25944LRVCT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES	UNSPECIFIED	.3 mA	5.2 A	1	1		NO LEAD	3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-XQCC-N20	2	18 V	.8 mm	3 mm		2.7 V		e4	NOT SPECIFIED	260	+2.2V	4 mm	YES
BQ24266RGER	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	6.65 mA		1	1		NO LEAD	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	2	14 V	1 mm	4 mm		4.2 V	RECHARGE THRESHOLD VOLTAGE IS 0.12V	e4	30	260	+3.3V	4 mm	YES
BQ24266RGET	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	6.65 mA		1	1		NO LEAD	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	2	14 V	1 mm	4 mm		4.2 V	RECHARGE THRESHOLD VOLTAGE IS 0.12V	e4	30	260	+3.3V	4 mm	YES
MAX1780ECM	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	LFQFP	SQUARE	YES	PLASTIC/EPOXY			1	1		GULL WING			FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G48	1	28 V	1.6 mm	7 mm	Not Qualified	3.5 V		e0		245		7 mm	YES
MAX6351SVUT-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	20 mA		1	1	BICMOS	GULL WING	5 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGES ARE 2.93V AND 1.58V; MANUAL RESET INPUT	e0			+2.93V	2.9 mm	NO
MAX6359SVUT-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	20 mA		1	1	BICMOS	GULL WING	5 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGES ARE 2.93V AND 1.58V; MANUAL RESET INPUT	e0		245	+2.93V	2.9 mm	NO
TS836-4IPT	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.012 mA		1	1		GULL WING	5 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		5.5 V	1.2 mm	3 mm	Not Qualified	1 V	RESET THRESHOLD VOLTAGE IS 4.50V	e0			+4.4V	4.4 mm	NO
TPS3600D33PW	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA		1	1		GULL WING	3.3 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Power Management Circuits	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	1.65 V	RESET THRESHOLD VOLTAGE IS 2.93V; MANUAL RESET, POWER-ON RESET GENERATOR	e4	30	260	+2.93V	5 mm	NO
TPS3606-33DGSR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.04 mA		1	1		GULL WING	3.3 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Power Management Circuits	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	1	5.5 V	1.1 mm	3 mm	Not Qualified	1.65 V		e4	30	260	2.93	3 mm	NO
BQ24700PW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	6 mA		1	1		GULL WING	18 V	7/30	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Power Management Circuits	.65 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G24		20 V	1.2 mm	4.4 mm	Not Qualified	7 V	ALSO REQUIRES A 4.5V TO 20V SUPPLY FOR SELECTOR OPERATION		NOT SPECIFIED	NOT SPECIFIED		7.8 mm	YES
MAX1808EUB	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY			1	5	BICMOS	GULL WING	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10	1	28 V	1.1 mm	3 mm	Not Qualified	4.4 V	Undervoltage Lockout, Power-On Reset	e0	20	240		3 mm	NO
NCP300HSN09T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA		1	1	CMOS	GULL WING	.85 V	0.7/10	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 0.9V	e0		235	+0.9V	3 mm	NO
NCP300LSN09T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA		1	1	CMOS	GULL WING	.85 V	0.7/10	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 0.9V	e0		235	+0.9V	3 mm	NO
NCP301HSN09T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA		1	1	CMOS	GULL WING	.85 V	2.9	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 0.9V	e0		235	+0.9V	3 mm	NO
NCP301LSN09T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA		1	1	CMOS	GULL WING	.85 V	0.7/10	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 0.9V	e0		235	+0.9V	3 mm	NO
NCP304HSQ18T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.003 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 1.8V	e0		235	+1.8V	2 mm	NO
NCP304HSQ20T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0033 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2V	e0		235	+2V	2 mm	NO
NCP304HSQ30T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0036 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 3V	e0		235	+3V	2 mm	NO
NCP304HSQ47T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0039 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4.7V	e0		235	+4.7V	2 mm	NO
NCP304LSQ27T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0033 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2.7V	e0		235	+2.7V	2 mm	NO
NCP304LSQ30T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0036 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 3V	e0		235	+3V	2 mm	NO
NCP304LSQ45T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0039 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4.5V	e0		235	+4.5V	2 mm	NO
NCP304LSQ47T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0039 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4.7V	e0		235	+4.7V	2 mm	NO
NCP305LSQ09T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0024 mA		1	1	CMOS	GULL WING	.85 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 0.9V	e0		235	+0.9V	2 mm	NO
NCP305LSQ18T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.003 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 1.8V	e0		235	+1.8V	2 mm	NO
NCP305LSQ45T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0039 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4	1	10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4.5V	e0		235	+4.5V	2 mm	NO
NCP305LSQ47T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0039 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4.7V	e0		235	+4.7V	2 mm	NO
NCP345SNT1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1 mA		1	1	BICMOS	GULL WING	6 V	6	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		25 V	1.1 mm	1.5 mm	Not Qualified	3 V	UNDERVOLTAGE LOCKOUT	e0		235		3 mm	NO
TPS3126E12DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.025 mA		1	1		GULL WING	1.2 V	1.2	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	3.3 V	1.45 mm	1.6 mm	Not Qualified	.85 V	MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4	NOT SPECIFIED	260	+1.14V	2.9 mm	NO
TPS3126E15DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.025 mA		1	1		GULL WING	1.5 V	1.5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	3.3 V	1.45 mm	1.6 mm	Not Qualified	.85 V	MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4	NOT SPECIFIED	260	+1.43V	2.9 mm	NO
TPS3126E15DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.025 mA		1	1		GULL WING	1.5 V	1.5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	3.3 V	1.45 mm	1.6 mm	Not Qualified	.85 V	MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4	NOT SPECIFIED	260	+1.43V	2.9 mm	NO
TPS3128E12DBVR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.03 mA		1	1		GULL WING	1.2 V	1.2	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G5		3.3 V	1.45 mm	1.6 mm	Not Qualified	.85 V	MANUAL RESET INPUT; POWER-ON RESET GENERATOR		NOT SPECIFIED	NOT SPECIFIED		2.9 mm	NO
TPS3128E15DBVR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.03 mA		1	1		GULL WING	1.5 V	1.5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	3.3 V	1.45 mm	1.6 mm	Not Qualified	.85 V	MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4	NOT SPECIFIED	260	+1.43V	2.9 mm	NO
TPS3128E15DBVT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.03 mA		1	1		GULL WING	1.5 V	1.5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	3.3 V	1.45 mm	1.6 mm	Not Qualified	.85 V	MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4	NOT SPECIFIED	260	+1.43V	2.9 mm	NO
TPS3128E18DBVR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.03 mA		1	1		GULL WING	1.8 V	1.8	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	3.3 V	1.45 mm	1.6 mm	Not Qualified	.85 V	MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4	NOT SPECIFIED	260	+1.71V	2.9 mm	NO
MAX1694EUB-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY			1	1		GULL WING	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.7 V		e0				3 mm	NO
MAX6339LUT-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	4	BICMOS	GULL WING	2.5 V	1/5.5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	1 V		e0				2.9 mm	YES
MAX6339OUT-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	4	BICMOS	GULL WING	2.5 V	1/5.5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	1 V		e4				2.9 mm	YES
L-ASC10-1SG48I	Lattice Semiconductor	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	UNSPECIFIED	35 mA		1	14	CMOS	NO LEAD	3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		.5 mm	85 Cel	-40 Cel		QUAD	S-XQCC-N48	3	3.6 V	1 mm	7 mm		2.8 V			30	260		7 mm	YES
NCP300LSN41T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0014 mA		1	1		GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4.1V	e0		235	+4.1V	3 mm	NO
NCP304LSQ17T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V		e0			+1.7V	2 mm	NO
NCP304LSQ25T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2.5V	e0		235	+2.5V	2 mm	NO
NCP304LSQ29T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2.9V	e0		235	+2.9V	2 mm	NO
NCP304LSQ37T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 3.7V	e0		235	+3.7V	2 mm	NO
NCP304LSQ40T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0036 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4V	e0		235	+4V	2 mm	NO
NCP304LSQ42T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0036 mA		1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4.2V	e0		235	+4.2V	2 mm	NO
NCP304LSQ43T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS	GULL WING	1.5 V	0.8/10	SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G4		10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4.3V	e0		235	+4.3V	2 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.