INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Control Technique	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Nominal Output Voltage	Maximum Input Voltage
TPS3600D50PWG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.04 mA		1	1			GULL WING			5 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	1.65 V	RESET THRESHOLD VOLTAGE IS 4.4V; MANUAL RESET, POWER-ON RESET GENERATOR		e4	30		260	+4.4V	5 mm	NO
BQ24105RHLRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HQCCN	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY	5 mA	4.5 A	1	1			NO LEAD	PULSE WIDTH MODULATION				BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N20	2	16 V	1 mm	3.5 mm	Not Qualified	4.35 V		4.35 V	e4	30		260		4.5 mm	YES	4.2 V	16 V
TPS2114PWG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.09 mA		1	2			GULL WING			2.8 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	5.5 V	1.2 mm	3 mm	Not Qualified	1.5 V	CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS		e4	NOT SPECIFIED		260		4.4 mm	YES
TPS2211AIDBG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	3	BICMOS		GULL WING			3.3 V	3.3/5,12		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified	0 V	ALSO OPERATE ON 5V SUPPLY		e4	NOT SPECIFIED		260		6.2 mm	NO
TPS2390DGKG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	1.5 mA	500 A	1	1			GULL WING		-48 V		-48		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-G8	2	-36 V	1.1 mm	3 mm	Not Qualified	-80 V	-36 V TO -80 V WIDE INPUT SUPPLY RANGE		e4	30		260	+1.35V	3 mm	YES
S-80815CNUA-B8AT2G	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3		RECTANGULAR	YES		PLASTIC/EPOXY	.0024 mA		1	1	CMOS		FLAT			3.5 V	0.95/10		SMALL OUTLINE, HEAT SINK/SLUG	TO-243	Power Management Circuits	1.5 mm	85 Cel			-40 Cel			DUAL	R-PDSO-F3		10 V	1.6 mm	2.5 mm	Not Qualified	.95 V	DETECTOR THRESHOLD VOLTAGE IS 1.5V			10		260	+1.5V	4.5 mm	NO
S-80823CNUA-B8IT2G	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3		RECTANGULAR	YES		PLASTIC/EPOXY	.0024 mA		1	1	CMOS		FLAT			3.5 V	0.95/10		SMALL OUTLINE, HEAT SINK/SLUG	TO-243	Power Management Circuits	1.5 mm	85 Cel			-40 Cel			DUAL	R-PDSO-F3		10 V	1.6 mm	2.5 mm	Not Qualified	.95 V	DETECTOR THRESHOLD VOLTAGE IS 2.3V			NOT SPECIFIED		NOT SPECIFIED	+2.3V	4.5 mm	NO
S-80825CNUA-B8KT2G	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3		RECTANGULAR	YES		PLASTIC/EPOXY	.0024 mA		1	1	CMOS		FLAT			3.5 V	0.95/10		SMALL OUTLINE, HEAT SINK/SLUG	TO-243	Power Management Circuits	1.5 mm	85 Cel			-40 Cel			DUAL	R-PDSO-F3		10 V	1.6 mm	2.5 mm	Not Qualified	.95 V	DETECTOR THRESHOLD VOLTAGE IS 2.5V			10		260	+2.5V	4.5 mm	NO
S-80832CNUA-B8RT2G	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3		RECTANGULAR	YES		PLASTIC/EPOXY	.0024 mA		1	1	CMOS		FLAT			4.5 V	0.95/10		SMALL OUTLINE, HEAT SINK/SLUG	TO-243	Power Management Circuits	1.5 mm	85 Cel			-40 Cel			DUAL	R-PDSO-F3		10 V	1.6 mm	2.5 mm	Not Qualified	.95 V	DETECTOR THRESHOLD VOLTAGE IS 3.2V			10		260	+3.2V	4.5 mm	NO
MCP73831-4ADI/MC	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA		1	1		TS 16949	NO LEAD			5.4 V	3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-N8	1	6 V	1 mm	2 mm	Not Qualified	3.75 V			e3	40		260	+4.40V	3 mm	YES
MCP73832-2ATI/MC	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD			5.2 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20		.5 mm	85 Cel			-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-N8	1	6 V	1 mm	2 mm	Not Qualified	3.75 V			e3	40		260	+4.2V	3 mm	YES
MCP73832-4ADI/MC	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD			5.4 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20		.5 mm	85 Cel			-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-N8	1	6 V	1 mm	2 mm	Not Qualified	3.75 V			e3	40		260	+4.4V	3 mm	YES
MCP73832-5ACI/MC	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD			5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20		.5 mm	85 Cel			-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-N8	1	6 V	1 mm	2 mm	Not Qualified	3.75 V			e3	40		260	+4.5V	3 mm	YES
MCP73832T-2DCI/MC	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA		1	1		TS 16949	NO LEAD			5.2 V	3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-N8	1	6 V	1 mm	2 mm	Not Qualified	3.75 V			e3	40		260	+4.20V	3 mm	YES
MCP73832T-3ACI/MC	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD			5.35 V	3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-N8	1	6 V	1 mm	2 mm	Not Qualified	3.75 V			e3	40		260	+4.35V	3 mm	YES
MCP73833-CNI/MF	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1		TS 16949	NO LEAD			5.2 V	3.8/5.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1	6 V	1 mm	3 mm	Not Qualified	3.75 V			e3			260		3 mm	YES
ISPPAC-POWR6AT6-01NN32I	Lattice Semiconductor	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		UNSPECIFIED	10 mA		1	6	CMOS		NO LEAD				3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-XQCC-N32	1	3.96 V	1 mm	5 mm	Not Qualified	2.8 V	IN-SYSTEM PROGRAMMABLE THROUGH JTAG		e3			260		5 mm	YES
NCN4555MNG	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		UNSPECIFIED			1	1			NO LEAD			3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	TIN		QUAD	S-XQCC-N16	1	5.5 V	.8 mm	3 mm	Not Qualified	2.7 V	INTERNAL LDO REQUIRES VBAT 2.7 TO 5.5 V		e3			260		3 mm	NO
NCN4557MTG	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		UNSPECIFIED			1	2			NO LEAD						CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	Tin (Sn)		QUAD	S-XQCC-N16	1	5.5 V	.8 mm	3 mm	Not Qualified	1.8 V	INTERNAL LDOS REQUIRES VBAT 2.7 TO 5.5 V		e3	40		260		3 mm	NO
NCN4557MTR2G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		UNSPECIFIED			1	2			NO LEAD						CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-XQCC-N16	1	5.5 V	.8 mm	3 mm	Not Qualified	1.8 V	INTERNAL LDOS REQUIRES VBAT 2.7 TO 5.5 V		e3	30		260		3 mm	NO
BQ24721CRHBTG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD					BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N32	2	24 V	1 mm	5 mm	Not Qualified	8 V			e4	NOT SPECIFIED		260		5 mm	NO
BQ24108RHLRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HQCCN	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY	5 mA	4.5 A	1	1			NO LEAD	PULSE WIDTH MODULATION				BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	R-PQCC-N20	2	16 V	1 mm	3.5 mm	Not Qualified	4.35 V		4.35 V	e4	NOT SPECIFIED		260		4.5 mm	NO	4.2 V	16 V
S-8232ABFT-T2-G	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0127 mA		1	1			GULL WING				2/16		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Tin/Bismuth (Sn/Bi)		DUAL	R-PDSO-G8		16 V	1.1 mm	3 mm	Not Qualified	2 V	DETECTION THRESHOLD VOLTAGE IS 4.35V		e6	10		260	+4.35V	4.4 mm	YES
MAX6734KALTD3	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.039 mA		1	3	BICMOS		GULL WING				1/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	.8 V			e4					2.9 mm	YES
MAX6734KASDD3	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.039 mA		1	3	BICMOS		GULL WING				1/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	.8 V			e4					2.9 mm	YES
MAX6734KASHD2-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.039 mA		1	3	BICMOS		GULL WING				1/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Power Management Circuits	.65 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	.8 V			e0					2.9 mm	YES
MAX6734KASVD3	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.039 mA		1	3	BICMOS		GULL WING				1/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Power Management Circuits	.65 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	.8 V			e0					2.9 mm	YES
TPS650531RGET	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES	2475 kHz	PLASTIC/EPOXY	.21 mA	1 A	1	5			NO LEAD			3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6 V	QUAD	S-PQCC-N24	2	6 V	1 mm	4 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED	5	260	+1.8V	4 mm	YES
TPS650532RGET	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES	2475 kHz	PLASTIC/EPOXY	.21 mA	1 A	1	5			NO LEAD			3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6 V	QUAD	S-PQCC-N24	2	6 V	1 mm	4 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED	5	260	+1.8V	4 mm	YES
STM6717SJWY6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 2.925V AND 0.875V; MANUAL RESET INPUT		e4	30		260	+2.925,0.875V	2.9 mm	YES
STM6717SYWY6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 2.925V AND 2.188V; MANUAL RESET INPUT		e4	30		260	+2.925,2.188V	2.9 mm	YES
STM6717TZWY6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 3.075V AND 2.313V; MANUAL RESET INPUT		e4	30		260	+3.075,2.313V	2.9 mm	YES
STM6719SVWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 2.925V AND 1.575V; MANUAL RESET INPUT		e4	30		260		2.9 mm	YES
STM6720SYWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 2.925V AND 2.188V; MANUAL RESET INPUT		e4	30		260	+2.925,2.188V	2.9 mm	YES
STM6777SFWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 2.925V AND 1.050V; MANUAL RESET INPUT		e4	30		260	+2.925,1.050V	2.9 mm	YES
STM6777SVWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 2.925V AND 1.575V; MANUAL RESET INPUT		e4	30		260		2.9 mm	YES
STM6777SYWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 2.925V AND 2.188V; MANUAL RESET INPUT		e4	30		260	+2.925,2.188V	2.9 mm	YES
STM6777TGWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 3.075V AND 1.110V; MANUAL RESET INPUT		e4	30		260	+3.075,1.110V	2.9 mm	YES
STM6777TZWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 3.075V AND 2.313V; MANUAL RESET INPUT		e4	30		260	+3.075,2.313V	2.9 mm	YES
STM6778TWWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 3.075V AND 1.665V; MANUAL RESET INPUT		e4	30		260	+3.075,1.665V	2.9 mm	YES
STM6778TZWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 3.075V AND 2.313V; MANUAL RESET INPUT		e4	30		260	+3.075,2.313V	2.9 mm	YES
STM6779VWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGE IS 1.575V; MANUAL RESET INPUT		e3	30		260		2.9 mm	YES
STM6780LWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGE IS 4.625V; MANUAL RESET INPUT		e4	30		260	+4.625V	2.9 mm	YES
STM6780SWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING			3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGE IS 2.925V; MANUAL RESET INPUT		e4	30		260	+2.925V	2.9 mm	YES
MAX4210BETT-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES		UNSPECIFIED	.67 mA		1	1	BICMOS		NO LEAD			5 V	3/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.13,38	Power Management Circuits	.95 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	S-XDSO-N6	1	5.5 V	.8 mm	3 mm	Not Qualified	2.7 V			e0					3 mm	NO
MAX4210CETT-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES		UNSPECIFIED	.67 mA		1	1	BICMOS		NO LEAD			5 V	3/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.13,38	Power Management Circuits	.95 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	S-XDSO-N6	1	5.5 V	.8 mm	3 mm	Not Qualified	2.7 V			e0					3 mm	NO
MAX4210DETT-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES		UNSPECIFIED	.67 mA		1	1	BICMOS		NO LEAD			5 V	3/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.13,38	Power Management Circuits	.95 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	S-XDSO-N6	1	5.5 V	.8 mm	3 mm	Not Qualified	2.7 V			e0					3 mm	NO
MAX4210DEUA-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.67 mA		1	1	BICMOS		GULL WING			5 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.7 V			e0					3 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.