Industrial Programmable Logic Devices (PLD) 315

Reset All

Part	Manufacturer	Programmable IC Type	Grading Of Temperature	Form Of Terminal	No. of Terminals	Package Code	Package Shape	Package Body Material	Propagation Delay	No. of Logic Cells	Surface Mount	Maximum Supply Voltage	No. of Macro Cells	Technology Used	No. of Inputs	Architecture	Nominal Supply Voltage (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	In-System Programmable	Output Function	Minimum Supply Voltage	No. of Product Terms	Pitch Of Terminal	Maximum Operating Temperature	Organization	No. of Dedicated Inputs	Minimum Operating Temperature	Finishing Of Terminal Used	Position Of Terminal	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Additional Features	JESD-609 Code	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	JTAG Boundary Scan Test	No. of I/O Lines
EPX740LI44-12	Altera	OT PLD	Industrial	J Bend	44	QCCJ	Square	Plastic/Epoxy	15 ns	40	Yes	5.5 V		CMOS	32		5	5 V	Chip Carrier	LDCC44,.7SQ	Field Programmable Gate Arrays		Macrocell	4.5 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 30 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-J44		4.57 mm	16.5862 mm	No	4 Labs; 40 Macrocells Configurable I/O operation with 3.3 V or 5 V	e0	58.8 MHz		32	220 °C (428 °F)	16.5862 mm		30
EPF81500ARI240-3	Altera	Loadable PLD	Industrial	Gull Wing	240	FQFP	Square	Plastic/Epoxy	1.8 ns	1296	Yes	5.5 V		CMOS	181		5	3.3/5,5 V	Flatpack, Fine Pitch	HQFP240,1.37SQ,20	Field Programmable Gate Arrays		Registered	4.5 V		.5 mm	85 °C (185 °F)	4 Dedicated Inputs, 181 I/O	4	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G240	3	4.1 mm	32 mm	No	1296 Logic elements; Configurable I/O operation with 3.3 V or 5 V	e0	385 MHz		177	220 °C (428 °F)	32 mm		181
GAL20V8B-25QPI	Lattice Semiconductor	EE PLD	Industrial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy	25 ns		No	5.5 V		CMOS	20	PAL-TYPE	5	5 V	In-Line	DIP24,.3	Programmable Logic Devices		Macrocell	4.5 V	64	2.54 mm	85 °C (185 °F)	12 Dedicated Inputs, 8 I/O	12	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15)	Dual	R-PDIP-T24		5.334 mm	7.62 mm	No	Register Preload; Power-Up Reset	e0	37 MHz		8		31.75 mm		8
GAL20V8C-10LJI	Lattice Semiconductor	EE PLD	Industrial	J Bend	28	QCCJ	Square	Plastic/Epoxy	10 ns		Yes	5.5 V		CMOS	20	PAL-TYPE	5	5 V	Chip Carrier	LDCC28,.5SQ	Programmable Logic Devices		Macrocell	4.5 V	64	1.27 mm	85 °C (185 °F)	12 Dedicated Inputs, 8 I/O	12	-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-J28	1	4.572 mm	11.5062 mm	No	Register Preload; Power-Up Reset	e0	58.8 MHz	30 s	8	225 °C (437 °F)	11.5062 mm		8
GAL22V10D-10LPI	Lattice Semiconductor	EE PLD	Industrial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy	10 ns		No	5.5 V		CMOS	22	PAL-TYPE	5	5 V	In-Line	DIP24,.3	Programmable Logic Devices		Macrocell	4.5 V	132	2.54 mm	85 °C (185 °F)	11 Dedicated Inputs, 10 I/O	11	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15)	Dual	R-PDIP-T24	1	5.334 mm	7.62 mm	No	10 Macrocells; Shared Input/Clock	e0	83.3 MHz		10		31.75 mm		10
GAL16V8D-15LPI	Lattice Semiconductor	EE PLD	Industrial	Through-Hole	20	DIP	Rectangular	Plastic/Epoxy	15 ns		No	5.5 V		CMOS	18	PAL-TYPE	5	5 V	In-Line	DIP20,.3	Programmable Logic Devices		Macrocell	4.5 V	64	2.54 mm	85 °C (185 °F)	8 Dedicated Inputs, 8 I/O	8	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDIP-T20		5.334 mm	7.62 mm	No		e0	45.5 MHz	30 s	8	225 °C (437 °F)	26.162 mm		8
GAL16V8D-25LPI	Lattice Semiconductor	EE PLD	Industrial	Through-Hole	20	DIP	Rectangular	Plastic/Epoxy	25 ns		No	5.5 V		CMOS	18	PAL-TYPE	5	5 V	In-Line	DIP20,.3	Programmable Logic Devices		Macrocell	4.5 V	64	2.54 mm	85 °C (185 °F)	8 Dedicated Inputs, 8 I/O	8	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T20		5.334 mm	7.62 mm	No		e0	37 MHz		8		26.162 mm		8
GAL16V8D-10LJI	Lattice Semiconductor	EE PLD	Industrial	J Bend	20	QCCJ	Square	Plastic/Epoxy	10 ns		Yes	5.5 V		CMOS	18	PAL-TYPE	5	5 V	Chip Carrier	LDCC20,.4SQ	Programmable Logic Devices		Macrocell	4.5 V	64	1.27 mm	85 °C (185 °F)	8 Dedicated Inputs, 8 I/O	8	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15)	Quad	S-PQCC-J20	1	4.572 mm	8.9662 mm	No	Programmable Output Polarity	e0	66.7 MHz	30 s	8	225 °C (437 °F)	8.9662 mm		8
GAL16V8D-20QJI	Lattice Semiconductor	EE PLD	Industrial	J Bend	20	QCCJ	Square	Plastic/Epoxy	20 ns		Yes	5.5 V		CMOS	18	PAL-TYPE	5	5 V	Chip Carrier	LDCC20,.4SQ	Programmable Logic Devices		Macrocell	4.5 V	64	1.27 mm	85 °C (185 °F)	8 Dedicated Inputs, 8 I/O	8	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15)	Quad	S-PQCC-J20	1	4.572 mm	8.9662 mm	No		e0	41.6 MHz	30 s	8	225 °C (437 °F)	8.9662 mm		8
GAL16V8D-25QJI	Lattice Semiconductor	EE PLD	Industrial	J Bend	20	QCCJ	Square	Plastic/Epoxy	25 ns		Yes	5.5 V		CMOS	18	PAL-TYPE	5	5 V	Chip Carrier	LDCC20,.4SQ	Programmable Logic Devices		Macrocell	4.5 V	64	1.27 mm	85 °C (185 °F)	8 Dedicated Inputs, 8 I/O	8	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15)	Quad	S-PQCC-J20	1	4.572 mm	8.9662 mm	No		e0	37 MHz	30 s	8	225 °C (437 °F)	8.9662 mm		8
XC9536XL-10PC44I	Xilinx	Flash PLD	Industrial	J Bend	44	QCCJ	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	36	CMOS			3.3	2.5/3.3,3.3 V	Chip Carrier	LDCC44,.7SQ	Programmable Logic Devices	Yes	Macrocell	3 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 34 I/O	0	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15)	Quad	S-PQCC-J44	3	4.572 mm	16.5862 mm	No	36 Macrocells	e0	100 MHz	30 s		225 °C (437 °F)	16.5862 mm	Yes	34
XC9572XL-10PC44I	Xilinx	Flash PLD	Industrial	J Bend	44	QCCJ	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	72	CMOS			3.3	2.5/3.3,3.3 V	Chip Carrier	LDCC44,.7SQ	Programmable Logic Devices	Yes	Macrocell	3 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 34 I/O	0	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15)	Quad	S-PQCC-J44	3	4.572 mm	16.5862 mm	No	72 Macrocells	e0	100 MHz	30 s		225 °C (437 °F)	16.5862 mm	Yes	34
XC9572XL-10TQ100I	Xilinx	Flash PLD	Industrial	Gull Wing	100	LFQFP	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	72	CMOS	72		3.3	2.5/3.3,3.3 V	Flatpack, Low Profile, Fine Pitch	QFP100,.63SQ,20	Programmable Logic Devices	Yes	Macrocell	3 V		.5 mm	85 °C (185 °F)	0 Dedicated Inputs, 72 I/O	0	-40 °C (-40 °F)	Nickel Palladium Gold	Quad	S-PQFP-G100	3	1.6 mm	14 mm	No	72 Macrocells	e4	100 MHz		72		14 mm	Yes	72
XC95144XL-10TQ144I	Xilinx	Flash PLD	Industrial	Gull Wing	144	LFQFP	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	144	CMOS	117		3.3	2.5/3.3,3.3 V	Flatpack, Low Profile, Fine Pitch	QFP144,.87SQ,20	Programmable Logic Devices	Yes	Macrocell	3 V		.5 mm	85 °C (185 °F)	0 Dedicated Inputs, 117 I/O	0	-40 °C (-40 °F)	Nickel Palladium Gold	Quad	S-PQFP-G144	3	1.6 mm	20 mm	No	144 Macrocells; Configurable I/O operation with 2.5 or 3.3 V	e4	81.3 MHz		117		20 mm	Yes	117
XC9536XL-10VQ64I	Xilinx	Flash PLD	Industrial	Gull Wing	64	TFQFP	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	36	CMOS	36		3.3	2.5/3.3,3.3 V	Flatpack, Thin Profile, Fine Pitch	TQFP64,.47SQ	Programmable Logic Devices	Yes	Macrocell	3 V		.5 mm	85 °C (185 °F)	0 Dedicated Inputs, 36 I/O	0	-40 °C (-40 °F)	Nickel Palladium Gold	Quad	S-PQFP-G64	3	1.2 mm	10 mm	No	36 Macrocells	e4	100 MHz		36		10 mm	Yes	36
XC9572XL-10VQ64I	Xilinx	Flash PLD	Industrial	Gull Wing	64	TFQFP	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	72	CMOS	36		3.3	2.5/3.3,3.3 V	Flatpack, Thin Profile, Fine Pitch	TQFP64,.47SQ	Programmable Logic Devices	Yes	Macrocell	3 V		.5 mm	85 °C (185 °F)	0 Dedicated Inputs, 52 I/O	0	-40 °C (-40 °F)	Nickel Palladium Gold	Quad	S-PQFP-G64	3	1.2 mm	10 mm	No	72 Macrocells	e4	100 MHz		36		10 mm	Yes	52
ATF1504ASL-25JI44	Atmel	EE PLD	Industrial	J Bend	44	QCCJ	Square	Plastic/Epoxy	25 ns		Yes	5.5 V	64	CMOS			5	3.3/5,5 V	Chip Carrier	LDCC44,.7SQ	Programmable Logic Devices	Yes	Macrocell	4.5 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 32 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-J44	2	4.57 mm	16.5862 mm	No		e0	60 MHz			225 °C (437 °F)	16.5862 mm	Yes	32
EPF10K50SFI484-2	Altera	Loadable PLD	Industrial	Ball	484	BGA	Square	Plastic/Epoxy	0.4 ns	2880	Yes	2.625 V		CMOS	254		2.5	2.5,2.5/3.3 V	Grid Array	BGA484,22X22,40	Field Programmable Gate Arrays		Mixed	2.375 V		1 mm	85 °C (185 °F)	254 I/O		-40 °C (-40 °F)	Tin Lead	Bottom	S-PBGA-B484	3	2.1 mm	23 mm	No		e0			254	220 °C (428 °F)	23 mm		254
EP610ILI-25	Altera		Industrial	J Bend	28	QCCJ	Square	Plastic	25 ns		Yes			CMOS	20	PAL-TYPE	5	5 V	Chip Carrier	LDCC28,.5SQ	Programmable Logic Devices		Macrocell		160	1.27 mm	85 °C (185 °F)			-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-J28				No		e0	40 MHz		16	220 °C (428 °F)
ISPLSI1048E-70LQI	Lattice Semiconductor	EE PLD	Industrial	Gull Wing	128	QFP	Square	Plastic/Epoxy	18.5 ns		Yes	5.5 V	192	CMOS			5	5 V	Flatpack	QFP128,1.2SQ,32	Programmable Logic Devices	Yes	Macrocell	4.5 V		.8 mm	85 °C (185 °F)	8 Dedicated Inputs, 96 I/O	8	-40 °C (-40 °F)	Tin/Lead	Quad	S-PQFP-G128	3	4.1 mm	28 mm	No	Use ISPLSI1048EA for new designs; Use 1048E-70 for new 1048E-50 designs	e0	56 MHz	30 s		225 °C (437 °F)	28 mm	No	96
ISPLSI3256A-70LQI	Lattice Semiconductor	EE PLD	Industrial	Gull Wing	160	QFP	Square	Plastic/Epoxy	18 ns		Yes	5.5 V	256	CMOS			5	5 V	Flatpack	QFP160,1.2SQ	Programmable Logic Devices	Yes	Macrocell	4.5 V		.65 mm	85 °C (185 °F)	0 Dedicated Inputs, 128 I/O	0	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15)	Quad	S-PQFP-G160	3	4.1 mm	28 mm	No		e0	50 MHz	30 s		225 °C (437 °F)	28 mm	Yes	128
ISPLSI1024-60LJI	Lattice Semiconductor	EE PLD	Industrial	No Lead	68	QCCJ	Square	Plastic/Epoxy	25 ns		Yes	5.5 V	96	CMOS			5	5 V	Chip Carrier	LDCC68,1.0SQ	Programmable Logic Devices	Yes	Macrocell	4.5 V		1.27 mm	85 °C (185 °F)	2 Dedicated Inputs, 48 I/O	2	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15)	Quad	S-PQCC-N68	3	4.57 mm	24.2316 mm	No	In-System Programmable; 4 External Clocks	e0	38 MHz	30 s		225 °C (437 °F)	24.2316 mm	No	48
ISPLSI1016E-80LT44I	Lattice Semiconductor	EE PLD	Industrial	Gull Wing	44	TQFP	Square	Plastic/Epoxy	18.5 ns		Yes	5.5 V	64	CMOS	35	PLA-TYPE	5	5 V	Flatpack, Thin Profile	TQFP44,.47SQ,32	Programmable Logic Devices	Yes	Macrocell	4.5 V		.8 mm	85 °C (185 °F)	3 Dedicated Inputs, 32 I/O	3	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G44	3	1.2 mm	10 mm	No		e0	57 MHz		32	240 °C (464 °F)	10 mm	No	32
XC95288XL-10BG256I	Xilinx	Flash PLD	Industrial	Ball	256	BGA	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	288	CMOS	192		3.3	2.5/3.3,3.3 V	Grid Array	BGA256,20X20,50	Programmable Logic Devices	Yes	Macrocell	3 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 192 I/O	0	-40 °C (-40 °F)	Tin Lead	Bottom	S-PBGA-B256	3	2.55 mm	27 mm	No		e0	100 MHz	30 s	192	225 °C (437 °F)	27 mm	Yes	192
XC95288XL-10TQ144I	Xilinx	Flash PLD	Industrial	Gull Wing	144	LFQFP	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	288	CMOS	117		3.3	2.5/3.3,3.3 V	Flatpack, Low Profile, Fine Pitch	QFP144,.87SQ,20	Programmable Logic Devices	Yes	Macrocell	3 V		.5 mm	85 °C (185 °F)	0 Dedicated Inputs, 117 I/O	0	-40 °C (-40 °F)	Nickel Palladium Gold	Quad	S-PQFP-G144	3	1.6 mm	20 mm	No	288 Macrocells	e4	100 MHz		117		20 mm	Yes	117
XC95288XL-10PQ208I	Xilinx	Flash PLD	Industrial	Gull Wing	208	FQFP	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	288	CMOS	168		3.3	2.5/3.3,3.3 V	Flatpack, Fine Pitch	QFP208,1.2SQ,20	Programmable Logic Devices	Yes	Macrocell	3 V		.5 mm	85 °C (185 °F)	0 Dedicated Inputs, 168 I/O	0	-40 °C (-40 °F)	Nickel Palladium Gold	Quad	S-PQFP-G208	3	4.1 mm	28 mm	No		e4	100 MHz		168		28 mm	Yes	168
XC95288XL-10CS280I	Xilinx	Flash PLD	Industrial	Ball	280	TFBGA	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	288	CMOS	192		3.3	2.5/3.3,3.3 V	Grid Array, Thin Profile, Fine Pitch	BGA280,19X19,32	Programmable Logic Devices	Yes	Macrocell	3 V		.8 mm	85 °C (185 °F)	0 Dedicated Inputs, 192 I/O	0	-40 °C (-40 °F)	Tin Lead	Bottom	S-PBGA-B280	3	1.2 mm	16 mm	No		e0	100 MHz	30 s	192	240 °C (464 °F)	16 mm	Yes	192
EPF10K30ABI356-3	Altera	Loadable PLD	Industrial	Ball	356	LBGA	Square	Plastic/Epoxy	0.9 ns	1728	Yes	3.6 V		CMOS	246		3.3	2.5/3.3,3.3 V	Grid Array, Low Profile	BGA356,26X26,50	Field Programmable Gate Arrays		Registered	3 V		1.27 mm	85 °C (185 °F)	4 Dedicated Inputs, 246 I/O	4	-40 °C (-40 °F)	Tin Lead	Bottom	S-PBGA-B356		1.63 mm	35 mm	No	1728 Logic Elements; 216 Labs	e0	80 MHz		246	220 °C (428 °F)	35 mm		246
EPF10K10AQI208-3	Altera	Loadable PLD	Industrial	Gull Wing	208	FQFP	Square	Plastic/Epoxy	0.8 ns	576	Yes	3.6 V		CMOS	150		3.3	2.5/3.3,3.3 V	Flatpack, Fine Pitch	QFP208,1.2SQ,20	Field Programmable Gate Arrays		Registered	3 V		.5 mm	85 °C (185 °F)	4 Dedicated Inputs, 134 I/O	4	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G208	3	4.1 mm	28 mm	No	576 Logic Elements; 72 Labs	e0	80 MHz		150	220 °C (428 °F)	28 mm		134
EPM3032ALI44-10	Altera	EE PLD	Industrial	J Bend	44	QCCJ	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	32	CMOS			3.3	2.5/3.3,3.3 V	Chip Carrier	LDCC44,.7SQ	Programmable Logic Devices	Yes	Macrocell	3 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 34 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-J44	1	4.572 mm	16.5862 mm	No		e0	103.1 MHz			220 °C (428 °F)	16.5862 mm	Yes	34
EPM3064ALI44-10	Altera	EE PLD	Industrial	J Bend	44	QCCJ	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	64	CMOS			3.3	2.5/3.3,3.3 V	Chip Carrier	LDCC44,.7SQ	Programmable Logic Devices	Yes	Macrocell	3 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 34 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-J44	1	4.572 mm	16.5862 mm	No		e0	100 MHz			220 °C (428 °F)	16.5862 mm	Yes	34
EPM9320ALI84-10	Altera	EE PLD	Industrial	J Bend	84	QCCJ	Square	Plastic/Epoxy	10.8 ns		Yes	5.5 V	320	CMOS	60		5	3.3/5,5 V	Chip Carrier	LDCC84,1.2SQ	Programmable Logic Devices	Yes	Macrocell	4.5 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 60 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-J84	3	5.08 mm	29.3116 mm	No	320 Macrocells; 20 Labs; 484 Flip Flops; Configurable I/O operation with 3.3 V or 5 V	e0	144.9 MHz		60	220 °C (428 °F)	29.3116 mm	Yes	60
EPM9320ARI208-10	Altera	EE PLD	Industrial	Gull Wing	208	FQFP	Square	Plastic/Epoxy	10.8 ns		Yes	5.5 V	320	CMOS			5	3.3/5,5 V	Flatpack, Fine Pitch	HQFP208,1.2SQ,20	Programmable Logic Devices	Yes	Macrocell	4.5 V		.5 mm	85 °C (185 °F)	0 Dedicated Inputs, 132 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G208	3	4.1 mm	28 mm	No	320 Macrocells; 20 Labs; 484 Flip Flops; Configurable I/O operation with 3.3 V or 5 V	e0	144.9 MHz			220 °C (428 °F)	28 mm	Yes	132
EPM9320RI208-20	Altera	EE PLD	Industrial	Gull Wing	208	FQFP	Square	Plastic/Epoxy	23 ns		Yes	5.5 V	320	CMOS			5	3.3/5,5 V	Flatpack, Fine Pitch	HQFP208,1.2SQ,20	Programmable Logic Devices	Yes	Macrocell	4.5 V		.5 mm	85 °C (185 °F)	0 Dedicated Inputs, 132 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G208	3	4.1 mm	28 mm	No	484 Flip Flops; Configurable I/O operation with 3.3 V or 5 V	e0	100 MHz			220 °C (428 °F)	28 mm	Yes	132
EPM9560RI208-20	Altera	EE PLD	Industrial	Gull Wing	208	FQFP	Square	Plastic/Epoxy	23.6 ns		Yes	5.5 V	560	CMOS			5	3.3/5,5 V	Flatpack, Fine Pitch	HQFP208,1.2SQ,20	Programmable Logic Devices	Yes	Macrocell	4.5 V		.5 mm	85 °C (185 °F)	0 Dedicated Inputs, 153 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G208	3	4.1 mm	28 mm	No	772 Flip Flops; Configurable I/O operation with 3.3 V or 5 V	e0	100 MHz			220 °C (428 °F)	28 mm	Yes	153
EPM9560RI304-20	Altera	EE PLD	Industrial	Gull Wing	304	FQFP	Square	Plastic/Epoxy	23.6 ns		Yes	5.5 V	560	CMOS			5	3.3/5,5 V	Flatpack, Fine Pitch	HQFP304,1.7SQ,20	Programmable Logic Devices	Yes	Macrocell	4.5 V		.5 mm	85 °C (185 °F)	0 Dedicated Inputs, 216 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G304	3	4.5 mm	40 mm	No	772 Flip Flops; Configurable I/O operation with 3.3 V or 5 V	e0	100 MHz			220 °C (428 °F)	40 mm	Yes	216
EPM7032LI44-12	Altera	EE PLD	Industrial	J Bend	44	QCCJ	Square	Plastic/Epoxy	12 ns		Yes	5.5 V	32	CMOS			5	5 V	Chip Carrier	LDCC44,.7SQ	Programmable Logic Devices	No	Macrocell	4.5 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 36 I/O	0	-40 °C (-40 °F)	Tin/Lead	Quad	S-PQCC-J44	1	4.572 mm	16.5862 mm	No	Labs interconnected by PIA; 2 Labs; 32 Macrocells; 1 External Clock; Shared Input/Clock	e0	125 MHz	20 s		220 °C (428 °F)	16.5862 mm	No	36
EPM7032LI44-15	Altera	EE PLD	Industrial	J Bend	44	QCCJ	Square	Plastic/Epoxy	15 ns		Yes	5.5 V	32	CMOS			5	5 V	Chip Carrier	LDCC44,.7SQ	Programmable Logic Devices	No	Macrocell	4.5 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 36 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-J44	1	4.572 mm	16.5862 mm	No	Labs interconnected by PIA; 2 Labs; 32 Macrocells; 1 External Clock; Shared Input/Clock	e0	100 MHz			220 °C (428 °F)	16.5862 mm	No	36
EPM7096LI68-15	Altera	EE PLD	Industrial	J Bend	68	QCCJ	Square	Plastic/Epoxy	15 ns		Yes	5.5 V	96	CMOS			5	3.3/5,5 V	Chip Carrier	LDCC68,1.0SQ	Programmable Logic Devices	No	Macrocell	4.5 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 52 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-J68	3	5.08 mm	24.2316 mm	No	Configurable I/O operation with 3.3 V or 5 V	e0	100 MHz			220 °C (428 °F)	24.2316 mm	No	52
EPM7096LI84-15	Altera	EE PLD	Industrial	J Bend	84	QCCJ	Square	Plastic/Epoxy	15 ns		Yes	5.5 V	96	CMOS			5	3.3/5,5 V	Chip Carrier	LDCC84,1.2SQ	Programmable Logic Devices	No	Macrocell	4.5 V		1.27 mm	85 °C (185 °F)	0 Dedicated Inputs, 64 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-J84	3	5.08 mm	29.3116 mm	No	Configurable I/O operation with 3.3 V or 5 V	e0	100 MHz			220 °C (428 °F)	29.3116 mm	No	64
EPM7096QI100-15	Altera	EE PLD	Industrial	Gull Wing	100	QFP	Rectangular	Plastic/Epoxy	15 ns		Yes	5.5 V	96	CMOS			5	3.3/5,5 V	Flatpack	QFP100,.7X.9	Programmable Logic Devices	No	Macrocell	4.5 V		.65 mm	85 °C (185 °F)	0 Dedicated Inputs, 76 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	R-PQFP-G100	3	3.65 mm	14 mm	No	Configurable I/O operation with 3.3 V or 5 V	e0	100 MHz			220 °C (428 °F)	20 mm	No	76
EPM7032QI44-12	Altera	EE PLD	Industrial	Gull Wing	44	QFP	Square	Plastic/Epoxy	12 ns		Yes	5.5 V	32	CMOS			5	5 V	Flatpack	QFP44,.5SQ,32	Programmable Logic Devices	No	Macrocell	4.5 V		.8 mm	85 °C (185 °F)	0 Dedicated Inputs, 36 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G44	3	2.45 mm	10 mm	No	Labs interconnected by PIA; 2 Labs; 32 Macrocells; 1 External Clock; Shared Input/Clock	e0	125 MHz			220 °C (428 °F)	10 mm	No	36
EPM7032STI44-7	Altera	EE PLD	Industrial	Gull Wing	44	LQFP	Square	Plastic/Epoxy	7.5 ns		Yes	5.5 V	32	CMOS			5	5 V	Flatpack, Low Profile	TQFP44,.47SQ,32	Programmable Logic Devices	Yes	Macrocell	4.5 V		.8 mm	85 °C (185 °F)	0 Dedicated Inputs, 36 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G44	3	1.27 mm	10 mm	No	32 Macrocells; 2 Labs; Configurable I/O operation with 3.3 V or 5 V	e0	166.7 MHz			220 °C (428 °F)	10 mm	Yes	36
EPM7032TI44-15	Altera	EE PLD	Industrial	Gull Wing	44	LQFP	Square	Plastic/Epoxy	15 ns		Yes	5.5 V	32	CMOS			5	5 V	Flatpack, Low Profile	TQFP44,.47SQ,32	Programmable Logic Devices	No	Macrocell	4.5 V		.8 mm	85 °C (185 °F)	0 Dedicated Inputs, 36 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G44	3	1.27 mm	10 mm	No	Labs interconnected by PIA; 2 Labs; 32 Macrocells; 1 External Clock; Shared Input/Clock	e0	100 MHz			220 °C (428 °F)	10 mm	No	36
EPM7128ATI144-10	Altera	EE PLD	Industrial	Gull Wing	144	LFQFP	Square	Plastic/Epoxy	10 ns		Yes	3.6 V	128	CMOS			3.3	2.5/3.3,3.3 V	Flatpack, Low Profile, Fine Pitch	QFP144,.63SQ,20	Programmable Logic Devices	Yes	Macrocell	3 V		.5 mm	85 °C (185 °F)	0 Dedicated Inputs, 100 I/O	0	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G144	3	1.6 mm	20 mm	No	128 Macrocells; 8 Labs; Configurable I/O operation with 2.5 V or 3.3 V	e0	87 MHz			220 °C (428 °F)	20 mm	Yes	100
EPX880QI132-12	Altera	Flash PLD	Industrial	Gull Wing	132	BQFP	Square	Plastic/Epoxy	12 ns	80	Yes	5.25 V		CMOS	104		5	3.3/5,5 V	Flatpack, Bumper	SPQFP132,1.1SQ	Field Programmable Gate Arrays		Macrocell	4.75 V		.635 mm	85 °C (185 °F)	22 Dedicated Inputs, 80 I/O	22	-40 °C (-40 °F)	Tin Lead	Quad	S-PQFP-G132	3	4.57 mm	24.13 mm	No	Configurable I/O operation with 3.3 V or 5 V	e0	80 MHz		104	220 °C (428 °F)	24.13 mm		80
EP610PI-25	Altera	OT PLD	Industrial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy	25 ns		No	5.5 V					5		In-Line				Macrocell	4.5 V		2.54 mm	85 °C (185 °F)	4 Dedicated Inputs, 16 I/O	4	-40 °C (-40 °F)		Dual	R-PDIP-T24		4.318 mm	7.62 mm	No			47.6 MHz			220 °C (428 °F)	31.6865 mm		16
EP610LI-30	Altera	OT PLD	Industrial	J Bend	28	QCCJ	Square	Plastic/Epoxy	32 ns		Yes	5.5 V		CMOS	20	PAL-TYPE	5	5 V	Chip Carrier	LDCC28,.5SQ	Programmable Logic Devices		Macrocell	4.5 V	160	1.27 mm	85 °C (185 °F)	4 Dedicated Inputs, 16 I/O	4	-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-J28				No	Macrocells Interconnected By Global Bus; 16 Macrocells; 2 External Clocks	e0	33.3 MHz		16	220 °C (428 °F)			16

Programmable Logic Devices (PLD)

Programmable Logic Devices (PLDs) are digital circuits that are designed to be programmed by the user to perform specific logic functions. They consist of an array of configurable logic blocks (CLBs) that can be programmed to perform any digital function, as well as programmable interconnects that allow these blocks to be connected in any way the designer wishes. This makes PLDs highly versatile and customizable, and they are often used in applications where a high degree of flexibility and performance is required.

PLDs are programmed using specialized software tools that allow the designer to specify the logic functions and interconnects that are required for a particular application. This process is known as synthesis and involves translating the high-level design into a format that can be implemented on the PLD hardware. The resulting configuration data is then loaded onto the PLD, allowing it to perform the desired logic functions.

PLDs are used in a wide range of applications, including digital signal processing, computer networking, and high-performance computing. They offer a number of advantages over traditional fixed-function digital circuits, including the ability to be reprogrammed in the field, lower development costs, and faster time-to-market. However, they also have some disadvantages, including higher power consumption and lower performance compared to custom-designed digital circuits.